PERFORMANCE iN LIGHTING TYK+ 10 LED Adjustable Die Cast Aluminium Outdoor Floodlight Instructions

: June 4, 2024
: PERFORMANCE iN LIGHTING

Table of Contents

PERFORMANCE iN LIGHTING TYK+ 10 LED Adjustable Die Cast Aluminium Outdoor
DIMENSION
INSTALLATION INSTRUCTION
ON/OFF WIRING
GROUND SPIKE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PERFORMANCE iN LIGHTING TYK+ 10 LED Adjustable Die Cast Aluminium Outdoor

Floodlight

PERFORMANCE-iN-LIGHTING-TYK+-10-LED-Adjustable-product

IMPORTANT : ‐
In order to ensure optimum performance and safety, the luminaire must be correctly installed by qualified personnel, in compliance with the following instructions.

Before performing any maintenance, always remove the voltage with a bipolar switch.
The light source must be replaced only by qualified personnel or by the manufacturer of the luminaire.
Any type of component maintenance can only be carried out by qualified personnel or by the manufacturer of the device.
The following instructions must be kept in a safe place.
Any misuse or any modification of the product not expressly authorised by PERFORMANCE iN LIGHTING S.p.A. is hazardous and makes the warranty nil and void..
Any reproduction of the contents of this sheet without prior written consent of PERFORMANCE iN LIGHTING S.p.A. is prohibited.

DIMENSION

PERFORMANCE-iN-LIGHTING-TYK+-10-LED-Adjustable-fig-1

INSTALLATION INSTRUCTION

PERFORMANCE-iN-LIGHTING-TYK+-10-LED-Adjustable-fig-2

ON/OFF WIRING

PERFORMANCE-iN-LIGHTING-TYK+-10-LED-Adjustable-fig-4

GROUND SPIKE

PERFORMANCE-iN-LIGHTING-TYK+-10-LED-Adjustable-fig-6

INSTALLATION INSTRUCTIONS :

The luminaire is suitable for outdoor and indoor installation.
The luminaire is suitable for installation on usually flammable surfaces.
Always verify that the structure is suitable to fix the luminaire.

ELECTRICAL CONNECTION :

Check the local voltage is same as indicated on the product label.
For the electrical connection please respect the mark on the luminaire.

Minimum distance between floodlight and illuminated surface.

Replace any damaged glass/diffusers or other damaged parts. Request the manufacturer to provide a spare part.

Regularly clean the glass/diffuser diffusor of the spotlight with a soft cloth. – Do not use chemicals for cleaning the glass/diffuser diffusor of the luminaire.

In respect and compliance to environmental standars at the end of life do not dispose of as standard waste, this must be taken to one of the authorised collection points.

PERFORMANCE iN LIGHTING S.p.A.
Tel: +39.045.61.59.211 – Fax: +39.045.61.59.292 www.performanceinlighting.com