ENLITE EN-DE62PRO LED Dimmable 6w IP20 Fire Rated Tilt Downlight Instruction Manual
- June 4, 2024
- ENLITE
Table of Contents
EN-DE62PRO LED Dimmable 6w IP20 Fire Rated Tilt Downlight
Instruction Manual
EN-DE62PRO LED Dimmable 6w IP20 Fire Rated Tilt Downlight
IMPORTANT INSTALLATION INFORMATION
-
Installation should be carried out by a qualified electrician in accordance with the latest edition of the National wiring regulations
(For Australia please check the latest edition of the Wiring Rules -AS/NZS 3000:2007). -
Mains supply voltage 220-240V 50Hz ~
-
These luminaires are for indoor use only.
-
Class, I, mains voltage, These luminaires must be earthed.
-
These downlights must be disconnected before insulation resistance testing of the lighting circuit.
-
Brown – (L) Live, Blue – (N) Neutral, Green/Yellow –Earth.
-
Please Note: It May is not compatible with PIRs. Please contact the sales office for compatibility.
-
We do not recommend mixing LEDs circuits with products such as extractor fans. This is due to the sensitive nature of LEDs and is not product specific
Environmental Protection (W.E.E.E.)
– Enlite’s WEEE Reg.No. WEE/BG0130YX (UK Only)
Waste Electrical & Electronic Equipment Regulations (WEEE) require that any of
our products showing this marking (left) must not be disposed of with other
household or commercial waste. Enlite does not levy any WEEE disposal charges
to its customers for affected WEEE-related products.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate any such product from other waste types and
recycle it responsibly at your local facilities. Check with your Local
Authority, Recycling Centre or retailer for recycling advice. If, when you
purchased any Enlite product, your supplier included a WEEE disposal fee, you
should then contact your supplier for advice on his take-back of the product
for the correct disposal.
GUARANTEE
This product is guaranteed for a period of 5 years from the date of purchase. The guarantee is invalid in the case of improper use, installation, tampering, and removal of the Q.C. date label, installation in an improper working environment or installation not according to the current edition of the National Wiring Regulations. Should this product fail during the guarantee period it will be replaced free of charge, subject to correct installation and return of the faulty unit. Enlite does not accept responsibility for any installation costs associated with the replacement of this product. This warranty is in addition to the statutory rights in your country of purchase. Enlite reserves the right to alter specifications without prior notice.
Tel: 01727 836611
Fax: 01727 836622
Website: www.enlitelighting.com
Email: sales@enlitelighting.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>