Babevy S500 2 In 1 High Landscape Convertible Baby Stroller User Guide

Babevy S500 2 In 1 High Landscape Convertible Baby Stroller User Guide

Important–Keep these instructions for future reference.

Safety standard : ASTM F833-21&16 CFR 1227

Model: S500

• High-grade aluminum frame
• Reversible seat
• Equipped with shock absorbers
• Linked dual-brake
• Foldable and portable

WARNING

Users and guardians,please read this specification carefully and keep it properly for your later reference it may affect children’s safety if you don’t follow this instructions. (if the specification pictures are not consistent with the product,please reference the product.)

1. When the product converted into pram body,this product is suitable for a child under six months old who cannot sit up unaided, roll over and cannot push itself on its hands and knees. Maximum weight of the child;9kg, the pram body must be used with frame and not be used separatedly, and when used as pram body,don’t forget to remove the seat belt. When the product converted into seat. the product is suitable for a baby 6 to 36 months old, the maximum weight is 15 kg
2. Discard the plastic bags immediatedly,keep the plastic bags away from children
3. Ensure that all the locking devices are engaged before use.
4. Avoid serious injury falling or sliding out .Always use the restraint system.
5. Never leave your child unattended.
6. It will affect the stability of the stroller with any weight on handlebars.
7. You must enable the brake device as soon as the stroller stopped in order to avoid danger causing by sliding.
8. Over weight or error operations will affect functions of the stroller even damage its frame.
9. Accessories which are not approved by the manufacturers shall not be used.
10. Don’t add up the additional mattress over thickness 8mm.
11. Don’t use the cart in uneven occasions or someplace liable to turnover.
12. Make sure children’s safety when adjusting the movable pass of the cart.
13. To avoid injury ensure that your child is kept away when unfolding and folding this product.
14. The shopping basket with maximum weight limit(3 kilos) no exceeding.
15. Don’t carry two or more children.
16. Children are forbidden to climb from the guardrail or stand on the seat.
17. The parking device shall be engaged when placing and removing the children.
18. Keep away from the fire.
19. Do not let your child play with this product.
20. This product is not suitable for running or skating.
21. Can only use the manufactacturer/retailer suggested or provided parts replacement parts.
22. Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
23. Carrying handles shall be left out of the pram body during use.
24. Child may slip leg into openings and strangle.Never use in relined carriage position(s) unless (nasufacturer to insert product specific intructions).

Parts Name

Assembly Parts

Installation Steps

As illustrated in picture 1 and 2, open the chassis ,when hear two click from both side ,it indicated that chassis has been opened completely.

Then you can get picture 3, next step as illutrated in picture 4 insert rear wheel axle into chassis hole in arrow direction,when hear a click it indictaed that the rear wheel has been installed.

As shown in figure 5, insert front wheel assembly into hole in chassis in arrow direction, when you hear click, it indicated that the front wheel assembly has been installed.After picture 5 step, then get picture 6.

In order to install pram body/seat,as picture 7 shown insert pram body/seat adapter into hole chassis hole in direction as picture 7.

User’s Instruction

As illustrated in picture 8, baby has his back towards his mother, when mother wants to face to face with baby, she just needs to press the button with thumb at the same time, pull out seat upwards as picture 9 in arrow direction, and rotate seat 180 degree , then insert seat dowards as picture 10.

As illustrated in picture 12.press button and rotate seat ,then stop at the position you hope.

As illustrated in picture 14,pressing the button, at the same time pull the wheel assesmbly downwards, the you will release the front wheel assembly.

As illustrated in picture 15,pressing the button, and at the same time pull outwards the rear wheel assembly as arrow direction. the you will release the rear wheel assemby.

Brake

As illustrated in picture 16,step pedal downwards as arrow B direction rear wheel asemmbly will be locked.

As illustrated in picture 16,step pedal downwards as arrow A direction ,rear wheel asemmbly will be released.

As illustrated in picture 17,pressing the button with both handle on both side of the seat, and at the same time, fold the seat as picture 17,18,19

As illustrated in picture 20, first step, press the button and the second lock at the same time last step, push downwards the handle as picture 21 arrow direction.

As illustrated picture 23,24, pull handle upwards, when hear two click,it indicated that the stroller has been opened,next step open the seat of stroller as picture 25,then open the cannopy totally as picture 26. ensure that both side joint are engaged firmly, push handle dowards and upwards, be sure that stroller will be not collapsed as picture 27.

Restraint system removed/assembled

As shown in the picture 28,29, put the seat belt 28 in the basket without cushion 29. As shown in picture 30, inserting the buckle in the hole as the picture 31.

Coversely, remove the buckles from the holes, the baske without seat belt as picture 29.

1. Buckling up:As shown in picture 32,first ly,put A, B into C, D separately,resuling in picture 33,then put the part H.J into the notch of part M,seat belt is ok with clicking sound, pulling the belt forcely to ensure fasten it as the picture34.

2. Seat belt opening.
   As shown in picture 35, pressing the button E,the seat automatically, then draw A, B. from C,D,respectively.

3. When the folding clasps of pictureA.B.C are buttoned, please using the fuction seat.

4. When the folding casps of picture A.B.C are released. Then using the function of pram body.

WARNING

• The function of pram body is suitble for a baby under six months old the maximum weight is 9kg.
• Must remove the seat belt when used as the pram boyd as shown inpicture 28,29. must use the seat belt when used as children seat as shown in picture 30,31.
• Do not use the seat as pram body separately,it must be used with chassis together.
• Carrying handle shall be left out of the pram body during use.

Maintenance

1. Check your baby stroller frequently, if there are screw loose or parts aging.
2. When material and stitching burst, please replace and repair timely if needed.
3. Keep the stroller clean.Forbid putting sharps into stroller so as to hurt kids.
4. Do not overuse or enforce it to keep its service life.
5. Please wash textile with neutral detergent and warm water (10°C~40°C), avoiding to hurt cloth.
6. All rotations should be grease and lubricate with oil on time.
7. When dismantling, please follow instructions carefully to avoid unnecessary loss.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>