Babevy KH01 Portable Baby Changing Table Installation Guide

Babevy KH01 Portable Baby Changing Table

USE FOCUS

1. When using this product for baby care, lay the baby flat on the table of the modified product, then put the safety belt on the baby’s belly and buckle it.
2. The zipper of the net bag cover must be fully pulled to the end to keep the net bag closed, except when taking and placing items in the net bag.

WARNING

FALL HAZARO : Children have suffered serious injuries after falling from changing tables. Falls can happen quickly.

• STAY in arm’s reach of your child.

TIPS

• For your use safety, please read this manual carefully and keep it properly.
  Please observe the following tips and warning information, otherwise it will affect the safe use of this product.

• This product is suitable for babies with height less than 70cm.

• The countertop of this product is suitable for bearing less than 25kg.

WARNING

• The baby care table must be assembled by adults and kept away from children to prevent danger to them.

• When installing the baby care table, please check whether all parts are intact.
  If any parts are damaged or missing, please do not use them.

• Please use the original parts provided by the manufacturer, and do not use any additional equipment and accessories that are not approved by the manufacturer.

• During installation, please do not place the product on rough ground.

• To avoid danger, please use the baby care table with the correct installation.

• To avoid danger, please stay away from stairs, heat source and open fire.
  To prevent danger, please do not leave the baby alone on the nursing table.

• To avoid danger, do not place strong and sharp products on the support platform.

• Be aware of the risk of open fires and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the changing unit.

• When lockable castors/wheels are fitted, they shall be locked when the changing unit is in use.

Do not leave the children unattended.
All assembly fittings shall always be correctly tightened and checked regularly.
This product is intended for age up to 12 months or weight up to 11kg.

PRODUCT DESCRIPTION

• Product Name : baby care table
• Product specification : 1007465cm
• Main material : steel pipe, support linen PP plastic
• Origin : Ningbo, Zhejiang
• Product model : KH01
• Applicable age : 0~1years old
• Executive standard : ASTM F2388
• Product color : see the product outer box for details
• Use environment : please use it in a dry and ventilated indoor space and avoid direct sunlight, so as not to cause the product to fade.
• Performance features : change diapers, change clothes and store things.

PRECAUTIONS

1. Please read the product manual carefully and install according to the steps.
2. Please keep this manual and screw accessories for future use.
3. Please check the safety of the baby care table regularly to ensure the tightness of all accessories to prevent loosening.
4. This product is inflammable. Do not get close to fire source or strong heat source, such as heater, radiator, etc.
5. Please use it under adult supervision. Do not leave unattended infants.
6. Attention! Only adults are allowed to install. Keep away from children during installation.
7. When the optional wheel bed stops, the brake handle of 4 wheels must be pressed.

MAINTENANCE AND CLEANING

1. In order to protect your baby from accidental injury, please check and maintain the product frequently.
2. When disassembling, please operate as described in the installation manual to avoid unnecessary damage.
3. During installation and daily use, all components must be checked for integrity and installation in place.
4. Avoid storing or using in humid, cold and high temperature environment for a long time.

AFTER SALES SERVICE

The following situations will not provide after-sales guarantee :

1. Products purchased through unauthorized networks or other informal channels of our company.
2. Products that cannot provide purchase information (such as online transaction records, purchase documents, etc.).
3. Damage due to improper personal use or disassembly
4. Damage caused by force majeure.
5. The warranty period of the baby care table is 1 year, and the metal,
   plastic and rubber products in the spare parts are guaranteed for half a year.

Any problem you encounter when using our products can be helped or solved through the service hotline. We will provide you with technical consultation free of charge.

REPAIR AND CLEANING

• Check the baby care table regularly. If any snap is damaged or loose, please repair and replace it.
• If the baby care table is damaged or faulty, please stop using it.
• Do not place the nursing table in a dark and humid environment for a long time, which will lead to mildew of the product.

HARMFUL SUBSTANCE

Main parts

• A Body
  

• B Support Stand
  

• C Load Bearing Plate
  

• D Table Cloth Cover
  

• E Storage Cloth Box
  

• F Storage Backing Fabric
  

• G Wheel
  

• H Cleaning bucket
  

Installation Steps Of Baby Care Table

• STEPS ONE
  Disassemble all components and place them on a soft level surface, such as a carpet. First, place components A and B on the same plane, and connect A1, A2 to B1, B2 respectively as shown in the picture. The other side is connected in the same way.
  
  Tip : the height can be adjusted in three gears. Please use the auxiliary tool “A” for adjustment.
  
  Height 1-The height of the table top from the ground is 89cm, suitable for parents with a height of about 168cm to use.
  Height 2-The height of the table top from the ground is 86cm, suitable for parents with a height of about 165cm to use. Height 3-The height of the table top from the ground is 83cm, suitable for parents with a height of about 160cm to use.

• STEPS TWO
  The height of the nursing table to the ground can be adjusted by adjusting the snap position and insertion depth of the four tripods with auxiliary tools. Determine the height suitable for your use.
  

• STEPS THREE
  

1. Open the large scissors-shaped bracket first, and then hold the snap box in the middle of the load-bearing frame to raise it to the highest point.  

2. After lifting to the highest point, push outward the inner lock keys on the left and right sides to a limited position.  

3. Then drop the bearing frame to a horizontal position.  

4. If you need to fold it, you need to hold the snap box in the middle of the load-bearing frame and raise it to the highest point.  

5. After lifting to the highest point, press inwards the colored buttons on the left and right sides to the lock key to unlock.  

6. Then press down the load bearing frame to fold it.  

After folding and closing, use the hook to snap into the opposite rotating shaft to fix it.

This operation mode is specially designed to prevent the unlock from touching by mistake.

• STEPS FOUR
  Insert the load-bearing plate C from the front to the top of the load- bearing frame. Note that the side with the Velcro is facing down. After placing, bind 4 Velcro to the load-bearing frame to prevent it from slipping.
  

• STEPS FIVE
  As shown in the figure, the storage cloth box can be hung on the left side of the changing table as a storage bag. The divided design is easy to store different kinds of supplies reasonably.

• STEPS SIX
  After picking up or placing items in the side basket, please zip the net cover in time.

Customer Support

Importer : Cascade Toys and Games LLC
Importer Address : 14550 Interurban Avenue South,STE
A100,Tukwila,WA 98168 US
Email : support@babevy.com
Manufacturer : Ningbo Kadite Machinery Co., Ltd
Manufacture Address : Floor 2,building 2,No.18,Hongxia
Road,Xiapu street,Beilun District,Ningbo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>