FLUX ADO1 Ador Laser Cutting Color Printer User Guide
- June 16, 2024
- Flux
Table of Contents
FLUX ADO1 Ador Laser Cutting Color Printer User Guide
FLUX Ador Quick Start Guide
Thank you for choosing FLUX products.
This quick start guide will help you set up your FLUX Ador for first use.
Meet FLUX Ador, the world’s first color-printing laser cutter. Boasting three high-quality, interchangeable laser module—diode laser, infrared laser, and printing module. Ador enables you to both engrave and cut through a wide range of materials while enhancing your projects with a pop of color. Designed with a user-friendly interface, Ador is the ideal laser creation tool for professionals and an excellent starting point for beginners venturing into their artistic exploration. With unlimited possibilities at your fingertips, begin your journey into laser crafting with Ador now.
- The infrared laser and printing modules are optional add-ons.
- Please retain all packages for warranty purposes.
The latest version of the Quick Start Guide is available at the following internet address. https://support.flux3dp.com/ador
What’s in the box
Accessories
- Laser module
- Vent hose
- Clamp
- Power adapter
- Power cord
- USB cable
- Prism Lift x6
Tool
- Hex wrench
Consumables
- Lubricating oil
- Wood piece
Product & Warning labels
Safety Precautions
Do not let minors operate alone.
Confirm that the person who intends to operate the machine has read the safety
precautions carefully and followed the instructions in the manual.
Make sure to install the vent hose properly. An exhaust hose missing or not
installed properly will increase the risk of laser, fumes, and dust hazards.
Do not modify the machine without FLUX authorization.
Do not try to modify, defeat or disassemble safety interlocks.
Do not place the machine in a humid, splashing rain or direct sunlight space.
In case of rain or extreme weather, please stop using the machine and put the
vent hose inside.
Do not place liquid, flammable, or explosive objects near the machine.
Do not place any living beings in the machine. It is strictly prohibited.
There are no noise hazard concerns as the Ador’s working level is below 70 dB.
Machine Handling
The Ador weighs 19 kilograms. It is recommended to have two people liftin cooperatively to avoid injury
Fire Hazard
Do not leave the machine unattended while in use.
Regularly clean the debris inside the Ador.
In case of fire, turn off the power immediately and unplug the power cord.
Always have an accessible, functioning fire extinguisher in the workplace.
Confirm that the engraving material will not be dangerously burned at high
temperatures.
Laser Safety
FLUX Ador is a Class 1 Laser Product and a Consumer Laser Product, complying with the IEC 60825-1:2014 and EN 50689:2021 certifications. The IEC 60825-1:2014 standard categorizes laser systems into eight safety classes: 1, 1C, 1M, 2, 2M, 3R, 3B, and 4. FLUX Ador is the Class 1 Laser Product, the safest among all classes, and aligns with the laser safety standards set by the International Electrotechnical Commission (IEC). EN 50689:2021 is a laser safety standard designed explicitly for consumer laser products. It guarantees that lasers with this certification meet the highest safety standards for consumer use. These assurances are provided through the laser’s enclosed protective housing and interlocks safety devices.
- For further information, please refer to the safety precautions on the Ador Help Center
Work Position of Operator
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>