FLUX ADO1 Laser Cutting Color Printer User Manual

FLUX ADO1 Laser Cutting Color Printer

Product Information

Specifications

• Weight: 19 kg
• Accessories: Hexagonal wrench, lubricating oil
• Consumables: Wood piece, product label, warning labels

Legal Notice

The most recent version of the Legal Notice will be sent to the following URL: https://support.flux3dp.com/hc/en-us/categories/202672617

FLUX Inc. does not guarantee against normal wear, consumed items or expenses incurred through normal use, misuse of the product or accidental damage.

FLUX is not responsible under this warranty for any damage or defect caused by:

1. Misuse (contrary to the declared purpose and the scope of use described in the relevant documentation) of the Products or Accessories;
2. External forces;
3. External or internal humidity;
4. Lightning strike, power surge or electromagnetic field.
5. Unauthorized alteration, correction, or modification. The modification of the hardware or accessories, including, without limitation, the substitution of parts, the making of permanent cosmetic alterations to the machine, the substitution of software or firmware or other unauthorized changes voids this warranty policy.
6. Natural or human-caused calamities such as earthquakes, wars, fires, and floods.
7. Improper storage, operation, application, or transport.

Collection and Treatment

This symbol indicates that this product should not be discarded as household waste. It must be returned to an authorized collection system. By following this procedure, you will contribute to the protection of the environment and human health. The recycling of materials helps to conserve natural resources.

• Valid in EU Member States and any country with corresponding legislation.

Accessories, Tools, and Consumables

• Laser Module
• Ventilation Tube
• Clamp
• Power Adapter
• Power Cable
• USB Cable
• Prism Lift x6
• Hexagonal Key
• Lubricating Oil
• Wooden Piece

Product Label & Warning Labels
Product labels provide essential information such as the FLUX Ador model, serial number, input power, nominal power, and product name. Warning labels indicate laser hazard, fire risk, and ultraviolet light risk, and emphasize not to operate the machine with the cover open, and to avoid direct eye or skin exposure to the laser.

Safety Precautions

Security Norms
Do not allow minors to operate the machine unsupervised. Ensure that the person who is going to use the machine has read the safety precautions and has followed the instructions in the manual. Ensure that the ventilation tube is properly installed. A missing or faulty installed ventilation tube increases the risk of laser exposure, smoke, and dust. Do not modify the device without FLUX’s authorization. Do not try to modify, cancel or dismantle the safety lock. Do not place the machine in a humid place, exposed to rain or direct sunlight. In case of extreme weather conditions, stop using the machine and store the ventilation tube inside. Do not place flammable or explosive liquids near the machine. Do not introduce any living being into the machine. This is strictly forbidden. There is no risk of noise as the working noise level of beamo is below 70 dB.

Handling the Machine

The Ador weighs 19 kg. It is recommended that it be lifted by two people to avoid injuries.

Fire Hazard
Do not leave the machine unattended while in operation. Clean the inside of the Ador regularly. In case of fire, immediately turn off the device and unplug the power cable. Always have an accessible and functioning fire extinguisher at the workplace. Confirm that the engraving material is safe to burn at high temperatures.

Operator’s Workstation

Illustration showing the operator at the workstation of the FLUX Ador machine.

Assembly

Instructions for the assembly of the FLUX Ador, including removing the accessory box, installing the laser module, and connecting the power supply. Detailed steps include loosening screws, aligning the laser module, attaching the ventilation tube, and starting the machine.

Initial Setup for First Use
Guidelines for configuring the FLUX Ador on its first use, such as selecting the language on the machine display, reading safety precautions, and executing the start-up test. Do not skip the Start-up Test if it is the first use of the device.

Warranty

The latest version of the warranty will be uploaded to the following URL: https://support.flux3dp.com/hc/en-us/categories/202672617

As a FLUX consumer, you benefit under certain warranty conditions and additional guarantees. FLUX offers specific warranty benefits to the consumer that are additional to, and not instead of, any legal warranty provided by your national consumer law. The duration and conditions related to legal guarantees are provided by the respective local laws.

Hardware Warranty
FLUX Inc. guarantees the hardware (excluding accessories and consumable parts) against defects in materials and workmanship when used as indicated in the manual for the warranty period. The limited warranty covers products purchased from authorized FLUX resellers against defects in materials or workmanship. Clients must provide the machine serial number and purchase information as proof of purchase.

Warranty Period
The warranty period begins when the customer receives the product. See the table below for warranty periods.

After-Warranty Repair and Support
FLUX will continue to provide technical support by phone, email, and other online methods even after the warranty period of the product. After the warranty period, all costs, including but not limited to replacement parts, shipping, and testing fees, are the sole responsibility of the customer. Our authorized reseller can provide a quote for repairs.

Disclaimer of Liability

FLUX Inc. does not guarantee against normal wear, consumable items, or misuse of the product or accidental damage. FLUX is not responsible under this warranty for any damage or defect caused by inappropriate use, external forces, humidity, lightning strike, power surge, or electromagnetic field. Unauthorized changes such as hardware or accessory modifications, permanent cosmetic changes to the machine, or software/firmware updates void the warranty. Natural or man-made disasters like earthquakes, wars, fires, and floods, as well as improper storage, operation, application, or transport, are not covered by the warranty.

Collection and Treatment

This symbol indicates that the product should not be discarded as household waste. It must be returned to an authorized collection system. Following this procedure helps protect the environment and human health. Recycling materials helps conserve natural resources.

• Valid in EU Member States and in any country with corresponding legislation.

Additional Information

For further assistance and details regarding the use of FLUX Ador, refer to the following resources:

• Beam Studio Web: http://studio.flux3dp.com
• Declaration – FLUX | Bring Any Design to Life: https://flux3dp.com/declaration
• Downloads – FLUX | Bring Any Design to Life: https://flux3dp.com/downloads

Product Usage Instructions

Safety Precautions
It is recommended to have two people lift the Ador to avoid injuries due to its weight.
Danger of fire: Do not leave the Ador unattended while it is running. Regularly clean the interior of the Ador from debris. In case of fire, immediately turn off the device and unplug the cable.

Operator’s Workstation
Ensure a safe and comfortable working environment for the operator.

Assembly

1. Remove the accessory box and take out the contents.
2. Loosen the clamp of the exhaust fan cover with a Phillips screwdriver and remove the cover.
3. Read the safety precautions carefully.
4. Follow the instructions and perform the Startup Test. Do not skip this test if it is the first use of the device.

Rotatable and Extendable Base
Adjust the base according to your needs.

FAQ (Frequently Asked Questions)

Q: Where can I find more information and support for the Ador?
A: Visit our support website at https://support.flux3dp.com/ador for more information and support resources.

Q: Where can I find the latest version of the Legal Notice and Warranty information for FLUX Ador?
A: The latest versions can be found at the following URL: https://support.flux3dp.com/hc/en-us/categories/202672617

Can I get a repair quote from an authorized distributor?

Yes, our authorized distributor can provide a repair quote.

Is there any warranty for the Ador?

Please refer to the warranty section in the user manual for information regarding the warranty period.

What should I do if I need support or repairs after the warranty period?

Do not discard it as household waste. It should be returned to an authorized collection system to help protect the environment and conserve natural resources.

What are some safety precautions when using FLUX Ador?

Do not allow minors to operate unsupervised, ensure proper installation of the ventilation tube, do not modify the device without authorization, and do not place the machine in a humid environment or near flammable materials.

How can I get technical support for FLUX Ador after the warranty period?

FLUX provides technical support via phone, email, and online methods. After the warranty period, all associated costs are the responsibility of the customer. For repairs, contact an authorized FLUX reseller for a quote.

References

• Beam Studio Web
• Declaration - FLUX | Bring Any Design to Life
• Downloads - FLUX | Bring Any Design to Life

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>