Diamond Flux FN231 Soldering Flux NoClean Paste Gel RMA ROL0 In 10g Syringe User Guide
- June 14, 2024
- Diamond Flux
Table of Contents
User Data Sheet for Diamond Flux FN231
User Guide
Information about the Flux, its use and storage
The flux is manufactured in the Florida, USA, from organic substances. Used
for soldering lead and lead-free alloys in electronics and wires. Used in
manufactories, repair shops and individually.
The flux belongs to the ROL0 class – NOCLEAN. Does not contain halogens and
lead. Residue after soldering does not cause corrosion on the printed circuit
board, components and wires.
Flux residue does not cause current leakage. Does not corrode copper.
Provides excellent wettability of the soldered surfaces for the best
soldering. The flux is suitable for soldering any BGA, QFN, SMD, DIP, SOT and
any other electronic components.
Instructions for use
- Provide adequate ventilation in the room and exhaust at the workplace.
- Apply a small amount of flux to the surfaces to be soldered. For components with two pads, apply a small drop to each pad.
- For best quality Diamond Flux FN231 can be used with any No Clean/ROL0 solder wire.
- Solder with a soldering iron, hot air or other soldering tool.
- After soldering, flux residues can be washed off with any electronic circuit cleaner for best performance. You can skip cleaning PCBs with a flux cleaner after soldering, flux residue will not cause PCB corrosion, components or current leakage, but flux cleaning is good practice. To improve the quality, we recommend cleaning off the flux and solder residues.
Storage instructions
- Long-term storage (more than 2 weeks) should be no more than 50 degrees Fahrenheit.
- Expiration dates are indicated on the flux label. Do not store it under the sun and in heat.
Cautions:
Avoid contact with eyes and skin. Do not use it internally.
Keep away from children. Avoid contact with waterways and soil.
Does not contain toxic substances.
Does not contain lead or other harmful substances.
RoHS Compliant.
Сomplies with the standard IPC J-STD-004
https://express-24.io
Express 24 LLC
Proudly made in Florida
References
- Express 24 LLC Florida Flux Manufactory and Consulting for Electronics Manufactories | Khramtsov Dmitrii SMT Process Engineer
- Express 24 LLC Florida Flux Manufactory and Consulting for Electronics Manufactories | Khramtsov Dmitrii SMT Process Engineer
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>