AVENTON Pace 500.3 Electric Cruiser Bike User Guide
- June 16, 2024
- AVENTON
Table of Contents
PACE 500.3 QUICK START GUIDE
GETTING STARTED
Press and hold the button on the handlebar control for about 3 seconds to
power up the system. While the bike and display are powered on, press and hold
for 3 seconds to turn your ebike off.
The Pace 500.3 ebike offers pedal assist (PAS). When using pedal assist, an
electric motor supplements the rider’s own effort. To use the pedal assist,
simply start pedaling, then tap the “+” or “-” symbols to increase or decrease
the amount of pedal assist. Pedal assist will engage at speeds up to 28 MPH.
The Pace 500.3 ebike is equipped with a throttle, which is mounted near the
rider’s left thumb, to propel the bike without pedaling. The throttle can
propel you at speeds up to 20 MPH. The throttle is “on-demand” meaning you can
engage the throttle at any time, including from a complete stop while in PAS
eco through turbo. However, we strongly encourage you to pedal first before
engaging the throttle.
The motor stops when you stop pedaling, squeeze the brake levers, or release
the throttle. Simply start pedaling again to re-engage the motor.
BATTERY AND CHARGING
We recommend charging the battery off the bike indoors, in moderate temperature conditions. To charge the battery, plug the charger into the charging port and then connect the charger to a wall outlet. The LED indicator light will be red when charging and will turn green when charging is complete.
MAINTENANCE & SERVICE
Properly maintaining your Pace 500.3 ensures its longevity and smooth operation. Here is our recommended ebike maintenance guide and schedule. Before assembling your bike, please watch the “How To Assemble” video. If you have questions during the assembly process, please contact Aventon Support.
SAFETY
You should wear an approved bicycle helmet every time you ride a bicycle, regardless of the legal requirement to do so. Additionally, some jurisdictions require helmet use when riding Class III ebikes like the Pace 500.3. You should comply with local law when riding your Aventon bicycle. Check out our Safety section for more information.
Home Page
Long press to power on, and enter the home page.
Trip A/B pages
- Double press switch Trip B pages. To enter the Trip A pages, and press
- Double press to exit the Trip A/ B pages.
Riding data pages
Click to switch
Light
Long press·+· to switch light.
Assistant Level
Use·+· / ·-· to switch.
Long press·-· is pedestrian mode.
Main Menu
- Long press·+· & ·-· to enter the main menu.
- Use ‘+ ‘ / ·-· to navigate to the ‘Set Unit’ line and press.
- Select ‘Clear Trip Data’ and other items using the same method.
- In each page, use’+’/ to adjust the parameters.
- Press to exit menu.
Connect to Aventon APP
- Long press·+· & ·-· to enter the main menu.
- Use·+·/ ‘- ‘ to navigate to the ‘Connect to APP’ line and press.
- Scan the QR-Code displayed on the screen with Aventon APP.
Documents / Resources
|
AVENTON Pace 500.3 Electric Cruiser
Bike
[pdf] User Guide
Pace 500.3 Electric Cruiser Bike, Pace 500.3, Electric Cruiser Bike, Cruiser
Bike, Bike
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>