GUANGDONG H6 Projector User Manual

GUANGDONG H6 Projector

The actual product may slightly differ from this manual due to continuous improvement and please refer to the actual product.

Precaution

Installation

1. Please install the projector with mounting hardware when it is mounted on ceiling or wall, And make sure of stability and safety.
2. Make sure that the desktop or bracket on which the projector placed stable. Otherwise, it may cause the auto-focus function to not work properly.
3. Please use the projector with caution to avoid falling or hitting, which may damage the projector.
4. Please use the projector in a dark room for best results.
5.  Please place the projector in an area that children cannot reach for use.
6. Never look into the projector lens when the lamp is on. This can damage your eyes and is especially dangerous for children.

Notes on anti-fire and electric shock prevention

1. Make sure that the ventilation openings are adequately ventilated to avoid heat accumulation within the projector.
2. Do not insert any metal object, such as an iron wire or a screwdriver into the projector. Prevent foreign objects from falling into the projector, such as paper clips and paper scraps, do not attempt to retrieve any such object. Make sure to immediately turn off the power and ask a professional technician to take it out.
3. The projector is not waterproof. To prevent the risk of short circuits. make sure to avoid water splashing and stay away from containers containing liquids. Do not operate the projector where it may be exposed to rain, water or excessive humidity.
4. Do not place the projector on the objects such as cloth or blankets. that may cause vents to be blocked.
5. Use the power cord or adapter with caution to avoid unduly bending. A damaged power cord may cause to electric shock.
6. After using, the power should be disconnected.

High-Temperature Warning

The temperature near the ventilation opening will rise during and after the projection. Please don’t touch it, otherwise it may cause burns.

Maintenance

Non-professional maintenance personnel are not allowed to disassemble the projector. If the projector is defective, please contact the professional technician or local dis

Cleaning

1. Unplug the power cord from the projector.
2. Regularly use the soft brush to clean the ventilation openings to prevent them from being blocked by dust accumulation. The projector will be overheated because of blocked dust.

Customer Services: |

Drop us an email to projector.team7@gmail.com This is the fastest way getting your problems solved.

Important Safety Considerations

Packing list

Projector Overview

Media supported

Remote

Quick start

1. Power On
2. Connect the power cord.
3. The power button will turn red.
4. Press the “power” button and wait for some seconds.
5. How to Focus
6. The prector will automatically adjust the “Focus” before entering the homepage.
7. if the clarity is not perfect. Press “F+” or “F.” on the remote to fine-tune the clarity.

Tips:

1. Please ensure that the distance between the projector and the screen is between 6 and 20 feet.
2. If don’t use “Auto-focus”, you can Turn off “Autofocus” Settings – Projection Settings- Focus Settings — Autofocus–» off
3. It is normal for the screen to be blurry when starting up. After starting up, the projector will automatically focus.
4. Never look into the projector lens when the lamp is on. This can damage your eyes and is especially dangerous for children.
5. Keep the projector stable while using.

How To Keystone Correction

Adjust the “Keystone Correction” to get the best image performance There are three methods to do keystone correction.

Method 1:

Automatical Keystone Correction:

• Settings – Projection Settings – Calibration Settings – Auto Keystone- On

Method 2:

Fast Keystone Correction:

• Settings – Projection Settings-Calibration Settings — Auto Keystone— Off
• Settings-Projection Settings – Fast Keystone Correction

Press on the remote to adjust the keystone through Horizontal and Vertical

Method 3:

Corner Correction:
Settings – Projection Settings – Corner Correction
Press on the remote to adjust “Corner Correction”. (also called 4-point correction)

Tips:

If you want to cancel all corrections quickly, please click “Keystone

*Correction Reset.**

• Settings-Projection Settings-Keystone Correction Reset

Connecting to Mobile device

Notice:

Owning to copyright issues, Netflix, Amazon Prime, HBO, and Hulu prohibit playing movies from projectors. But you can use a Fire Stick to connect the projector to watch these contents.

IOS Wi-Fi Mirroring

1. Connect the projector and your iOS mobile device to the same Wi-Fi. (Please refer to the chapter “Settings/Network Setting”)
2. Choose and click “IOS Wi-Fi Mirroring” , enter and stay at the “iOS Wi-Fi Mirroring” page.
3. Open the “Screen Mirroring” on your iPhone/iPad, find the device “LED Projector_ xxxx”, click it to start mirroring.

IOS Wi-Fi Projection

1. Connect the projector and your iOS mobile device to the same Wi-Fi. (Please refer to the chapter “Settings/Network Setting”)
2. Choose and click “iOS Wi-Fi Mirroring”, enter and stay at the “iOS WiFi Mirroring” page.
3. Click on the video app and select ‘LED _Projector _xxxx” to connect.

IOS AP Mirroring

1. Choose and click “iOS AP Mirroring”. enter and stay at the ‘iOS AP Mirroring” page.
2. Connect your iOS mobile to the Wi-Fi named as “LED _ Projector_xxxx.
3. pen the “Screen Mirroring” on your iPhone, find the device “LED Proiector xxxx”. click it to start mirroring.

Android Mirroring

1. Connect the projector and your Android device to the same Wi-Fi. (Please refer to the chapter “Settings/Network Setting*)
2. Choose and click “Android Mirroring”, enter and stay at the “Android Mirroring” page.
3. Open the multiple displays function on your Android phone.
4. Choose “LED_Projector_xxxx” to connect to the projector.

Android Projection

1. Connect the projector and your Android device to the same Wi-Fi. (Please refer to the chapter “Settings/Network Setting”)
2. Stay at the home page. (Not the”Android Mirroring” page)
3. Click Son in the video app and select “LED_Projector_xxxx* to connect.

Connecting to Laptop / Macbook / PC

1. Wireless Connection for Win 10 or Above
2. Connect the projector and your laptop to the same Wi-Fi.
3. Choose and click Android Mirroring”, enter and stay at the “Android Mirroring” page.
4. Press the Windows logo key[Win+K] on your keyboard.
5. Select “LED_Projector _xxxx” to connect and start wireless projection.

Tips:

Earlier versions of Windows (below Win 10) have no wireless projection function. Please use an HDMI cable to connect.

Wireless Connection for Mac OS

1. Connect the projector and your MacBook to the same Wi-Fi. (Please refer to the chapter “Settings/Network Setting”)
2. Choose and click “iOS Wi-Fi Mirroring”, enter, and stay at the *iOS WiFi Mirroring” page.
3. Click “Displays” in System Preferences.
4. Select “LED_Projector_xxxx” in “AirPlay Display” to connect to the projector.

Wired Connection

1. Connect the computer to the projector via HDMI cable.
2. Turn on your computer and the projector.
3. Press the “Source” button on the remote to open the Source Menu.
4. Choose HDMI1 or HDMI2 (depending on which HD port you connected) as a signal source.
5. press”OK on the remote.

Tips:
Loading during channel switching takes some normal time

Connecting to Usb-disk

1. Insert USB disk into the projector via usb port.
2. Press the “Source” button on the remote to open Source Menu.
3. Choose “USB” and press “OK” button on remote.
4. Choose the usb drive and then press”OK” on the remote to enter the file lists of the usb drive.

Playing Video
Press on remote to select Item. Press “OK” key to play video.
Playing Music
Press on remote to select Item. Press “OK” key to play music.
Playing Image
Press on remote to select Item. Press “OK” to play image.
Playing Office Suite
Press on remote to select Item. Press “OK” to play office suite.
Tips:
Only text, excel, word, ppt documents are supported for this function

Connecting to the Fire Stick

1. Insert the Firestick to HDMI-1 port.
2. Connect the power cord of the fire stick.
3. Press the “Source” button on the remote to open Source Menu.
4. Choose HDMI-1 as Signal Source and press “OK” on the remote.

What to do if the projector doesn’t recognize Firestick?

Your Firestick may be in sleep mode, please unplug your Firestick and charger cord of Firestick, then plug back in to activate the Firestick.

What to do if there is no sound?

1. Enter Fire stick home page.
2. “Setting”–>” Display & Sound”.
3. select “on” for ” navigation sounds”.
4. Select “Stereo (or PCM)” for “surround sound”.

Settings

1. Projection Settings

Settings – Projection Settings –

1. Projection Mode
   Four projection modes: Front Table, Rear Table, Front Ceiling, Rear Ceiling- When the projector is installed in ceiling or wall, you can change the projection direction through this menu.

2. Zoom In/Out
   You can change the size of the projected image through this menu.

3. Focus Settings
   Turn on / off the autofocus function.

4. Calibration Settings
   Turn on / off the auto keystone function.

5. Fast Keystone Correction
   Keystone Correction by horizontal and vertical directions.

6. Corner Correction
   Keystone correction by four points.

7. Keystone Correction reset
   Restore the Keystone Correction to the initial state

Network Setting

1. Settings – Network Setting
2. Scan and select your wifi hotspot – Connect

Other Settings

Settings – Other Settings

1. Boot Signal Input
   Set the default signal channel when startup.

2. Power-on Mode
   Standby or start after connecting the power cord.

3. Key Tone
   Turn on /off key tone.

4. Screen Saver
   Set the during time to enter Screen saver.

5. Screensaver Timeout Shutdown
   Set the during time to shutdown (after entering screen saver).

6. Language Settings
   Select the language for the system.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>