OUTDOOR TECH TS4 Rugged Wireless Boom Box User Manual
- June 16, 2024
- OUTDOOR TECH
Table of Contents
OUTDOOR TECH TS4 Rugged Wireless Boom Box
Specifications
- Power On / Off : Hold the Power Button for 2-3 seconds or until the LED light flashes blue and the voice prompt states Power on. Hold for 3-4 seconds to power off.
- Pairing Mode : When powered on, hold the + and – buttons simultaneously for 2-3 seconds or until the LED light flashes blue 3 times and the voice prompt states Pairing.
- Transmit Mode : Turn on TS4 #1 and wait for the voice prompt. Press and hold the MFB button and the – button simultaneously until TS4 #1 enters pairing mode.
- Receiver Mode : Turn on TS4 #2 and wait for the voice prompt. Press and hold the MFB button and the + button simultaneously until TS4 #2 enters pairing mode.
Product Usage Instructions
Powering On / Off
To power on the Turtle Shell 4.0, hold the Power Button for 2-3 seconds
until the LED light flashes blue and the voice prompt confirms power on. To
power off, hold the Power Button for 3-4 seconds until the LED light flashes
red and the voice prompt confirms power off.
Pairing Mode
To enter pairing mode, make sure the device is powered on. Then,
simultaneously hold the + and – buttons for 2-3 seconds until the LED light
flashes blue 3 times and the voice prompt confirms pairing mode.
Transmit Mode
To use transmit mode, turn on TS4 #1 and wait for the voice prompt to
confirm it is on. Then, press and hold the MFB button and the – button
simultaneously until TS4 #1 enters pairing mode.
Receiver Mode
To use receiver mode, turn on TS4 #2 and wait for the voice prompt to
confirm it is on. Then, press and hold the MFB button and the + button
simultaneously until TS4 #2 enters pairing mode.
Manual Pairing Mode
Once TS4 #1 and TS4 #2 are connected, the voice prompt will state “Di”.
Press the + and – buttons to enter manual pairing mode.
Using as a Wireless Headset
The built-in microphone allows the Turtle Shell 4.0 to be used as a
wireless headset. Note that the microphone only works when connected via
Bluetooth.
Telephone Functions
- Answer a call: Press the multifunction button.
- End a call: Press the multifunction button.
- Decline a call: Press and hold the multifunction button for two seconds.
- Make a call: Use your phone to dial as usual.
FAQ
-
Q: Can I use the Turtle Shell 4.0 as a wireless headset?
A: Yes, the Turtle Shell 4.0 has a built-in microphone and can be used as a wireless headset when connected via Bluetooth. -
Q: How do I power on/off the Turtle Shell 4.0?
A: To power on, hold the Power Button for 2-3 seconds until the LED light flashes blue. To power off, hold the Power Button for 3-4 seconds until the LED light flashes red. -
Q: How do I enter pairing mode?
A: When the device is powered on, simultaneously hold the + and – buttons for 2-3 seconds until the LED light flashes blue 3 times. -
Q: How do I use transmit mode?
A: Turn on TS4 #1, wait for the voice prompt, and then press and hold the MFB button and the – button simultaneously until TS4 #1 enters pairing mode. -
Q: How do I use receiver mode?
A: Turn on TS4 #2, wait for the voice prompt, and then press and hold the MFB button and the + button simultaneously until TS4 #2 enters pairing mode.
Good call on picking up the Outdoor Tech® Turtle Shell® 4.0 wireless boom box.
Your experience of the universe will soon be enhanced wirelessly and
powerfully. This manual exists to help make sure that you
to want to relax for a hot second and look through this.
Kisses,
ANATOMY
- A. Power On / Power Off
- B. Multi Function Button
- C. Skip Backward / Volume Down
- D. Skip Forward / Volume Up
- E. USB C Charge Port/ 3.5 mm Aux Port
- F. USB C Output Charge Port
- G. Microphone
- H. Light Indicator
POWER UP TO CHARGE
For best results, fully charge your Turtle Shell® 4.0 before use!
- Connect the included USB C to a power source and the charging port on the Turtle Shell® 4.0. When charging, the red LED light will stay activated. ***Full charge time is about 4-5 hours.
- When the Turtle Shell® 4.0 is fully charged, the RED light will turn off.
The displayed battery meter is supported for Apple products.
*The Turtle Shell® 4.0’s Bluetooth and music functions can still operate while charging.
MUSIC FUNCTIONS
PHONE FUNCTIONS
PAIRING TO DEVICE
Power On / Off
- ON: Hold the Power Button for 2-3 seconds or until the LED light flashes blue and the voice prompt states “Power on”
- OFF: Hold the Power Button for 3-4 seconds or until the LED light flashes red and the voice prompt states “Power off”
Enter Pairing Mode
When powered on hold the “+” and “-” at the simultaneously for 2-3 seconds or
until you see the LED light flash blue 3 times and the voice prompt states
“Pairing.”
Pairing Turtle Shell 4.0 to Device
Open the Bluetooth settings on your device. If you have put your Turtle Shell®
4.0 into pairing mode, it should be listed as “ODT Turtle Shell® 4.0” as an
available device to pair. Connect with the Turtle Shell® 4.0 and enter “0000”
if prompted. The voice prompt will state “Paired” if the Turtle Shell 4.0 and
your device connect.
SPEAKER TO SPEAKER PAIRING
STEP ONE Transmit Mode
Turn on TS4 #1 and wait till the voice prompt states that the speaker is on.
Then press & hold simultaneously the MFB button and the “-” button. TS4 #1
will then state that it is in pairing mode.
STEP TWO Receiver Mode
Turn on TS4 #2 and wait till the voice prompt states that the speaker is on.
Then press & hold simultaneously the MFB button and the “+” button. TS4 #2
will then state that it is in pairing mode.
STEP THREE
Once TS4 #1 and TS4 #2 are connected, the voice prompt will state “Di.” Then
Press “+” and “-” to enter manual pairing mode.
LISTEN The built-in microphone means that the Turtle Shell 4.0 can be used as a wireless headset.
NOTE: The built-in microphone only works when connected via Bluetooth.
The following are tips on how to use your Turtle Shell 4.0 to speak on the telephone:
- Answer a call……… Press the multifunction button.
- End a call…………… Press the multifunction button.
- Decline a call……… Press and hold the multifuntion
- button for two seconds.
- Make a call………… Use your phone to dial as usual.
- Listen and talk through the
- Turtle Shell® 4.0.
- Mute…………………. Hold the >> and << buttons for 2
- seconds, or until you hear a beep.
FAQ
Hearing Distortion
- Lower the volume on your Turtle Shell® 4.0® and / or phone /device.
- Make sure it’s charged up. Check for low battery, then charge if necessary.
- Not Loud Enough
- Turn up the volume on your phone /device or your Turtle Shell® 4.0.
- Make sure it’s charged up.
- Plug the Turtle Shell in to your phone / device via 3.5mm stereo cable.
- Unable to Pair
- Confirm your phone / device is Blue tooth compatible.
- Re-Pair : Follow pairing instructions in this guide.
- Signal Loss or Dropouts via Bluetooth
- Move Turtle Shell closer to your phone / device.
- Make sure it’s charged up.
- Turn off your Turtle Shell 4.0 and phone / device, then power up and reconnect.
SPECS
- Rating: IPX7
- Bluetooth v 5.0
- Bluetooth Profiles: HSP, HFP. A2DP, AVRCP
- Compatibility: Bluetooth v 1.1 and above Operating range: 32 ft
- Operating range between speakers: 15 ft
- Device name: ODT TURTLE SHELL 4.0
- Power source: Lithium ion rechargeable battery cell
- Battery capacity: 4000mAh / 14.8 Wh Charge Output: 5V / 1A
- Charge Input: 5V / 2.1A
- Playing Time: Up to 18 hrs
- Charge Time: ~4.5 hrs
- Operating Temperature: 0~45° C
- Storage Temperature: -20~60° C
- RoHS: Fully RoHS compliant
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
- The apparatus shall be used at maximum 45 ambient temperature.
- The maximum height above sea level is 2000m 14.
- The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
- Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION
Danger of explosion if battery is incorrectly replaced, Replace only with the
same or equivalent type.
The appliance shall not be disposed together with the normal waste. It must be
recycled.
K, Later gator.
DON’T BE SO ANTISOCIAL
- Facebook.com/outdoortechnology
- Twitter & Instagram: @outdoortech
Questions, comments, complaints, secret desires, or just to say what’s up: email info@outdoortech.com K bye.