Heimdall Power Neuron Advanced Monitoring Device for High-Voltage Power Lines Installation Guide
- June 10, 2024
- Heimdall Power
Table of Contents
Neuron Advanced Monitoring Device for High-Voltage Power Lines
Installation Guide
Installation guide
Heimdall Power
Neurons
Live line installation
The Heimdall Power neurons can be installed – and removed – from energized power lines.
Installation methods
SUPPORT / RETURN: +47 51 77 78 00
support@heimdallpower.com
Prior to installation
The following 4 steps must be conducted to ensure connectivity to Heimdall
Cloud
Step 1
Open the Neuron
Step 2
Install the Activation Plug
Step 3
Call Heimdall Power
Step 4
Ready to be installed
Installation on the power line
The activation plug must be activated prior to the installation!
Step 5
How to position the Neuron
The neuron must be mounted on bare conductor (no coating, spirals etc.)
Step 6
Ensure horizontal orientation
Step 7
Apply a torque of~15 Nm
Measure distance from
ground to suspension point
Step 8
Measure distance from
the ground to the suspension point according to figure.
Measurements must be vertical.
Information for each Neuron must be provided to Heimdall Power (see back
page).
Data registration
The following information for each Neuron must be provided to Heimdall Power:
PICTURE OF THE INSTALLED NEURON (OPTIONAL)
heimdallpower.com
Heimdall Power’s vision is to optimize power grids globally. Since 2016 our
innovative technology has optimized grids utilization with state-of-the-art
software and unique hardware technology. We continue to innovate and improve,
creating value for customers, shareholders and society. Our smart grid
technology allows you to be the guardian of the grid.
Made in Norway
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>