OUTDOOR TECH Magnetic Water Resistant Bluetooth Magnetic Speaker Instruction Manual
- June 1, 2024
- OUTDOOR TECH
Table of Contents
OUTDOOR TECH Magnetic Water Resistant Bluetooth Magnetic Speaker
Instruction Manual
BLUETOOTH SPEAKER AND ACCESSORIES
A: Bluetooth speaker
B: USB-C charging cable
C: User manual
BASIC FUNCTION
OPERATION
6. Power Saving
Speaker will power off automatically after 10 minutes of not being paired with
a connected device.
7. Charging
Important note:
Use supplied USB-C charging cable.
Use an output source 5V/2A (or above).
Charge when you hear low battery prompt tone or the Indicator light flash red.
The red indicator light will remain solid while charging and switch off when
Bolt is fully charged.
FUNCTION INSTRUCTIONS
SPECIFICATIONS
FREQUENTLY ASKED QUESTIONS
Q1: What kind of charger should we use for the speaker?
A: All common USB chargers can be used, but we suggest USB chargers with 5V/2A
or above.
Q2: What if there is noise or discontinuous sound while playing music? A: The speaker will operate normally if used within 10M of the paired device and no obstructions exist. If placed beyond 10M and/or with obstruction, sound quality might be impacted.
Q3: Why does the speaker power o automatically?
A: When there is no Bluetooth pairing for 10 minutes, the speaker will shut
off automatically to conserve the battery.
Q4: Why is the speaker not connecting to my paired cell phone?
A: Remove ODT Bolt from the paired Bluetooth list on your phone and then
restart pairing.
Q5: What if my speaker will not turn on?
A: Please charge it for an hour or more, then long press the power on button
for 10-30 seconds to reset the speaker.
If you have any other questions or need support operating your Bolt speaker,
please reach out to support@outdoortech.com.
IMPORTANT PRODUCT FACTS
Notes:
- Please read this manual carefully before use.
- Please fully charge Bolt before the rst use.
- Please use a certi ed power adapter that has passed nation safety certi cation.
- Please charge Bolt once a month to maintain battery performance.
- Do not operate Bolt in extremely hot or cold temperatures. Temperatures beyond 5 C-35 C range could force the speaker to automatically shut off to protect the internal circuit.
- When charging Bolt in a high temperature environment, the product may automatically stop charging to protect the battery. At this time, the charging indicator usually ashes quickly to indicate that the charging environmental temperature or the product internal temperature is too high.
- Storage environment temperature: -5~35℃ RH<70% (recommended 25℃±5).
Important safety instructions:
- Do not disassemble or repair this speaker personally, otherwise it may cause product damage or personal injury.
- Do not use it in dusty, humid, dry, and high-temperature environment.
- Do not place this product near a heat source, or a place with direct sunlight, a lot of dust, or mechanical vibration.
- In order to reduce the risk of re, please do not cover this product with newspapers, tablecloths, curtains etc., during use.
- If the product has a waterproof feature, please do not exceed the nominal parameter range when using it.
- When the product is damaged (such as the power cord or plug is damaged, liquid enters or objects fall into the device, unable to operate normally or falls), it must be repaired.
- When the product is fully charged, do not connect it to the charger for further long time charging.
- The maximum ambient temperature should not exceed 40°C.
*This speaker supports mobile phones/ tablets/ PCs etc. This user manual is illustrated with mobile phones.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>