KOORUI 24 Inch Computer Monitor Instruction Manual
- June 14, 2024
- KOORUI
Table of Contents
KOORUI 24 Inch Computer Monitor
Product Information
Specifications
- Product Name: VESA Holder
- Compatibility: Compatible with VESA devices
- Wall Mount Type: Standard wall mount
- Tilt Angle Limit: Maximum 15 degrees
- Wall Mount Screw Size: M4
- Wall Mount Screw Length: Up to 7mm
Product Usage Instructions
Installation
- Purchase a VESA device separately. Refer to the user guide provided with your VESA device for details.
- Assemble the VESA screws.
- Choose a solid wall perpendicular to the floor to install your wall mount. If you plan to attach the wall mount to surfaces other than plasterboard, please contact your nearest dealer for additional information.
- Important: Do not install the product on a slanted wall to avoid the risk of it falling and causing severe personal injury.
- Ensure that the tilt angle does not exceed 15 degrees.
- Assemble the VESA holder using the retaining screws removed from the rear shell of the product.
- Use M4 screws to mount the wall mount. The length of the screws should not exceed 7mm.
Holder Removal
To remove the VESA holder, follow these steps:
- Remove the VESA screws.
Frequently Asked Questions (FAQ)
Q: Can I use the VESA holder without purchasing a separate VESA device?
A: No, the VESA holder needs to be used with a compatible VESA device.
Please refer to the user guide provided with your VESA device for more
information.
Q: What should I do if I want to mount the product on a surface other than
plasterboard?
A: Please contact your nearest dealer for additional information and
guidance on mounting the product on surfaces other than plasterboard.
Q: What is the maximum tilt angle for mounting the product?
A: The product should not be mounted at more than a 15 degree tilt angle.
Q: What size and length of screws should I use for wall mounting?
A: Use M4 screws with a maximum length of 7mm for wall mounting.
VESA Holder Installation & Attention
- VESA device can be purchased separately.
- Refer to the user guide provided with your VESA device for details.
- Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the product on a slanted wall, it may fall and result in severe personal injury.
- Do not mount the product at more than a 15 degree tilt.
- Assemble VESA holder (using retaining screws removed from rear shell).
- Wall mounting screws require M4 screws, the length should not exceed 7mm.
Holder removal
VESA Holder removal
