SOLINTEG DuoCOM Wi-Fi /LAN 2 In 1 Module Owner’s Manual
- June 12, 2024
- SOLINTEG
Table of Contents
SOLINTEG DuoCOM Wi-Fi /LAN 2 In 1 Module Owner’s Manual
Description
ABOUT DUOCOM
DuoCOM is a monitoring device that combines two ways of communication including Wi-Fi and LAN offering convenient configuration and reliable communication for the solar system.
Our easy-to-use DuoCOM can enhance your Solinteg’s inverter data monitoring, save your time on the configuration and enhance the reliability of tracking your installation’s energy production.
Key Parameters
Wi-Fi 20M
Communication distance
LAN 100M
Plug and Play
USB 3.0
Installation
1Minute
Data transmission interval
Variable
IP 65
Suitable for indoor & outdoor
Modbus TCP
Communication with server
Modbus RTU
-30～75℃
Wide operation temperature
Appearance
Off
Connection is abnormal.
Slow Flash
The dongle isn’t connected to the router.
Quick Flash
The dongle is connected to the router but not connected to the server.
On
The dongle is working properly
Restart/Reset(configuration will be cleared) Press the button for less than 5s
to restart the dongle. Press the button for more than 5s to reset the dongle
Highlights
Reliability
Integrate Wi-Fi and LAN two communication methods offering higher data
transmission reliability
Data Security
Data encrypted to ensure your personal generation data security
Easy to use
Plug-and-play connectors for quick installation, and free of configuration
save your time
Multi-communication
Support easy communication with 3- rd party devices and platforms via Modbus
TCP and Modbus RTU communication
Wi-Fi/LAN Auto Detect
No need configuration when router DHCP is enabled
Need simple configuration
Wi-Fi/LAN Auto Switchover
LAN
If there’s an ethernet cable inserted into the DuoCOM dongle, the inverter
will use LAN communication which you don’t need to do the configuration.
Wi-Fi
If there’s no ethernet cable inserted into the DuoCOM dongle, the inverter
will use Wi-Fi communication which will take a few steps for the
configuration.
If a DuoCOM is configured and attached to the router through WiFi and LAN at the same time, the dongle will first use the LAN communication and will automatically switch to WiFi if the LAN communication fails for more than 5 minutes.
Modbus TCP Application
MODBUS/TCP is a simple derivative of the MODBUS family of communication protocols for managing and controlling automation equipment. MODBUS TCP uses TCP/IP and Ethernet to transmit MODBUS messages between sites, and the communication messages are encapsulated in Ethernet TCP/IP packets.
There are two methods to realize the communication between the inverter to EMS device through Modbus TCP:
- Direct connection
- Indirect connection (transfer through the router)
Why to Choose DuoCOM
Reliable
WiFi or LAN communication automatically switchover if one fails for 5 minutes
Easy to install
Everything will be done with just a plug and play
Extendable
Modbus TCP and RTU allow 3rd party EMS device connection for more
possibilities
Cost Saving
No need to store two kinds of modules for meeting different customer demands
Simple
One dongle for all application scenarios, make everything simpe
THANK YOU
www.solinteg.com
www.solinteg.com
2023.7.27
Documents / Resources
|
SOLINTEG DuoCOM Wi-Fi /LAN 2 In 1
Module
[pdf] Owner's Manual
Wi-FiLAN-2-in-1-Module, DuoCOM Wi-Fi LAN 2 In 1 Module, DuoCOM, Wi-Fi LAN 2 In
1 Module, 2 In 1 Module, Module
---|---