Protempo Us Dba Outdoor Tech OT5900 Pearls True Wireless Earbuds User Guide

June 6, 2024
Protempo Us Dba Outdoor Tech

PEARLS
TRUE WIRELESS
EARBUDS  

Good call on picking up the Outdoor Tech Pearls True Wireless Earbuds. Your experience of the universe will soon be enhanced powerfully. This manual exists to help make sure that you use them correctly, so you’re definitely going to want to relax for a hot second and look through this. Kisses,

WHAT IS INCLUDED

ANATOMY

POWER ON / OFF

How to turn On/Off
Turn On: Method 1: Take both earbuds out of the charging case, they will turn on and connect with each other automatically. Method 2: When the earbuds are powered off, press and hold the MFB button on either earbud for 2 seconds. (LEDs on both earbuds will stay white for 1 second)
Turn Off: Method 1: Put the earbuds back into the charging case, they will automatically turn off. Method 2: When the earbuds are on, press and hold the MFB button on either earbud for 5 seconds. (LEDs on both earbuds will stay red for 1 second) Note: If you turn one of the earbuds off while both earbuds are paired with your Bluetooth device, the other one will turn off at the same time.

PAIRING

Twin Earbud Mode: Take both earbuds out of the charging case, they will power on and connect with each other automatically. (The LEDs on the earbuds flash white and the voice prompt says “pairing” Enable Bluetooth on your device and select ‘ODT Pearls” from the list to connect. You will hear the voice prompt “connected”. Once the earbuds paired with your device for the first time, they will pair with that device automatically each time in the future as soon as you take them out of the case.

MONO EARBUD MODE

Mono Earbud Mode:
Note: If you hear the voice prompt -Low Battery” from one of the earbuds, the other one may still have some battery power left. You may put the low battery earbud back in the charging case for charging and use the other earbud as “Mono Earbud Mode”.
Mono Mode for Right Earbud:
Take the right earbud out of the charging case, it will power on and enter pairing mode automatically. Enable Bluetooth on your device and select “ODT Pearls” from the list to connect, if the right earbud has been used as Mono Mode last. Mono Mode for Left Earbud: Take the left earbud out of the charging case, it will power on automatically. Hold the MFB button for 2 seconds to enter pairing mode. Enable Bluetooth on your device and select “ODT Pearls” from the list to connect, if the left earbud has been used as Mono Mode last it will connect with your last connected device automatically once it enters pairing mode.

 TOUCH CONTROLS

NEXT TRACK: Press and hold the MFB for 2 seconds
VOLUME UP: Quick double press the MFB These functions work on both the Left and Right earbuds
PLAY/PAUSE: Tap the MFB of either earbud No once
ANSWER/HANG UP: Tap the MFB of either earbud once
REJECT CALL: Press and hold the MFB of either earbud for 2 seconds
ACTIVATE SIRI/GOOGLE ASSISTANT: 1 Quick double press the MFB of either earbud

TOUCH CONTROLS

PREVIOUS TRACK: Press and hold the MFB for 2 seconds
 VOLUME DOWN: Quick double press the MFB to decrease volume
ANSWER/HANG UP: Tap the MFB of either earbud once  These functions work on both the Left and Right earbuds
PLAY/PAUSE: Tap the MFB of either earbud once
REJECT CALL: Press and hold the MFB of either earbud for 2 seconds
ACTIVATE SIRI/GOOGLE ASSISTANT: Quick double press the MFB of either earbud

 POWER OFF

Method 1: Put the earbuds back into the charging case, they will automatically turn off.
Method 2: When the earbuds are on, press and hold the MFB button on either earbud for 5 seconds. (LEDs on both earbuds will stay red for 1 second)

Note: If you turn one of the earbuds off while both earbuds are paired with your Bluetooth device, the other one will turn off at the same time.

CHARGING EARBUDS

To charge the earbuds, simply place them into the charging case. (Ensure the earbuds are placed correctly in their corresponding slots) The LEDs on both earbuds turning red indicate earbuds are undercharging status and then shut off when fully charged. Note: Please charge the earbuds and the charging case once at least every 3 months if you do not use the earbuds for a long time. Please disconnect the charge in time when the charging case is fully charged.

CHARGING CASE

To power up the charging case, simply connect it to a USB power supply via the USB-C cable. The LEDs on the front of the charging case will flash when charging and all 4 LEDs will remain on for one minute when fully charged and then all will shut off. (A fully charged case will provide 4-5 additional earbud charges.)

FIT

Adjust the earbud by rotating it back and forth to feel more stable and comfortable.

 RESET

How to reset your Earbuds:
If the Left side can not connect to the Right side or only one side has sound:

  1.  Turn off Right and Left both sides separately by pressing the buttons » Long press until you see the RED LED light on both earbuds.
  2. Then long press Right and Left earbuds for around 12-14 seconds until LED is PURPLE on both earbuds. The earbuds should power off automatically.
  3. Put the earbuds in the charging case, then take them out, Right and Left sides will repair each other automatically, after around 4 seconds you should see the Right earbud flash BLUE and RED. Let earbud flashes BLUE when both sides are paired successfully.

SPECS

Water/Sweat Resistance Rating: IPX5
Operating Range Device to Earbud: 10 m (32 feet)
Play Time: 6hrs at 50% Volume
Earbuds Charge Time: 1.5 hrs
Charging Case Charge Time: 1-2 hrs
Speaker Size: 6mm Drivers Speaker Sensitivity: 97±30,1KHz
Speaker Impedance: 16ohm
Speaker Frequency Range: 2OHz-2OKHz
Bluetooth Version: BT5.0
Earbud Battery Info: 702334/500mA
Paired Devices: ODT Pearls
Product Features: Answer Call, End Call, Reject Call, Volume Control, Track Control. Play/Pause Music, Siri/Google Assistant Activation

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

 FCC ID: 2A2L8-0T5900

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals