Pipishell PISM03 Speaker Wall Mounts Instruction Manual
- June 16, 2024
- Pipishell
Table of Contents
Pipishell PISM03 Speaker Wall Mounts Instruction Manual
IMPORTANT SAFETY INFORMATION
- Please carefully read all instructions before attempting If you have any questions or concerns, contact our technical support line at
- 1-800-556-9829 (US/CA) / 44-808-196-3885 (UK) or customer service at [email protected].
- CAUTION: Avoid potential injuries and property damage!
- Do not use this product for any purpose that is not explicitly specified in this Do not exceed weight capacity. We are not liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
- This product is designed for installation on wood studs, solid concrete, con- crete block and brick walls – Do not install on drywall alone.
Weight Restrictions
If the equipment you intend to use weighs more than the leading to possible injury maximum weight indicated, this mount is not compatible.
Verify Your Wall Construction
Tools Needed (NOT lncluded)
Supplied Parts and Hardware
Step 1 Attach the Speaker Mount to the Wall
For wood stud installation, follow STEP 1A.
For solid concrete, concrete block, or brick walls installation, follow
STEP 1B.
Step 1A Wood Stud Option
WARNING:
- Avoid potential injury or property damage! DO NOT use a drill for tightening the lag screws [A1]. Only use a socket DO NOT over-tighten the lag screws [A1]. Tighten the lag screws [A1] only until they are pulled firmly against the wall plate.
- DO NOT USE ANCHOR [A2] FOR THIS STEP!
- Ensure the speaker mount [01] is securely fastened to the X
wall before continuing to the next step.
- Any material covering the wall must not exceed 5/8” (16mm).
- Nominal wood stud size: common 2 x 4” (51 x 102mm) minimum1½ x 3½” (38 x 89mm). A2 Wall
Stud center must be verified.
Step 1B Solid Concrete, Concrete Block, or Brick Walls Option.
WARNING:
- Avoid potential injury or property damage! DO NOT use a drill for tightening the lag screws [01]. Only use a socket DO NOT over-tighten the lag screws [A1]. Tighten the lag screws [A1] only until they are pulled firmly against the wall plate.
- Ensure the speaker mount [01] is securely fastened to the wall before continuing to the next
- Any material covering the wall must not exceed 5/8” (16mm).
- Mount the speaker mount directly onto the concrete
- Minimum solid concrete thickness: 203mm (8”).
- Minimum concrete block size: 203 x 203 x 406mm (8 x 8 x 16”).
- Never drill into the mortar between
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Loading......