PLATFORM DUO 2 In 1 Wireless Charger with Lightning-Fast Charging Speeds User Guide
- October 30, 2023
- PLATFORM
Table of Contents
PLATFORM DUO 2 In 1 Wireless Charger with Lightning-Fast Charging Speeds
Product Information
- Product Name: ODDICT PLATFORM DUO
- Compatibility: SAMSUNG devices
- Wireless Charging: Super Fast Wireless Charging (Max 15W)
Product Usage Instructions
- Package Contents
- Wireless Charging Pad
- 1.5 m (4.9 ft) USB-C to USB-C Cable
- Quick Guide / Warranty Card
- Getting Started
- Connect the PLATFORM DUO to the power adapter with the provided charging cable. Ensure that the status indicator on the front blinks red, green, orange lights, and then turns off. Note: The PLATFORM DUO is not compatible with chargers that do not support Super-Fast Charging (SFC). To use the 15W super-fast wireless charging 2.0 feature, you must use a SFC charger or a 25W or higher PD (Power Delivery) charger. Using a PD or AFC charger of less than 25W may cause improper operation of the PLATFORM DUO.
- Place compatible devices on the charging area marked with (+) to start wireless charging.
- The left pad supports 15W super-fast wireless charging, while the right pad works with all devices that support 5W wireless charging.
* The charging speed may vary depending on the device.
* Actual charging speed may vary depending on usage, charging conditions and other factors.
* The PLATFORM DUO supports up to 7.5W fast charging for compatible Apple devices.
* Reconnect the charging cable when status indicator isn’t working correctly.
* Depending on the device (or accessory/case), the status lights may appear differently..- Usage Instructions
- If the device is not charging or stops charging, check if it is placed correctly on the charging area marked with (+).
- For dual high-speed charging, it is recommended to use PD adapters of 25W or higher.
- Some thicker or metal phone cases may hinder wireless charging.
Safety Precautions
Precautions are to prevent unexpected accidents or dangers in advance by using the product safely and correctly, so please make sure to read and follow them.
- This is an indoor-only product suitable for home and office use.
- Do not disassemble, adjust, or repair the product arbitrarily.
- Do not heat or place the product in high temperature.
- Keep in dry place away from water or moisture.
- Do not drop or hit the product.
- Do not place or store on a slope.
- Do not leave the fully charged device on the charging pad for a long time.
- Do not touch the product with wet hands.
- Turn off the power when not in use.
- Do not place ID or bank card with magnetic strips or chips on the charging pad.
- Due to risk of short circuit and fire, do not disassemble the product and c-type cable. Keep away from water and fire.
- Do not place the product next to any medical or industrial equipment.
- Use a safety certified 25W or higher PD charger. Uncertified chargers may cause malfunction or damage.
- Do not use the product for any purpose other than its intended purpose.
Specification
- Model: PLATFORM DUO
- Input: 9.0 V ⎓ 2.77 A (PD 25 W Over TA)
- Output Coil 1: 5 W / 7.5 W / 10 W / 15 W
- Output Coil 2: 5 W
- Dimensions (Cable Not Included): 173.0 x 126.3 x 19.7 mm (6.81 x 4.97 x 0.78 in)
- Color: Black
- Weight (Cable Not Included): 186 g (6.56 oz)
- Cable Length: 1.5 m (4.9 ft)
Compliance Information
FCC Compliance Information FCC ID: V2R-PLATFORMDUO This device complies
with Part 15 of FCC Rules. Operation is subject to the following two
conditions
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
USER CAUTION
Changes or modifications not expressly approved by the party reasonable for
compliance could void the user’s authority to operate the equipment. IC
Compliance Information IC: 10488A-PLATFORMDUO This device complies with
Industry Canada’s licence-exempt RSSs. Operation is subject to the following
two conditions
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
NOTE: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR).
Designed for SAMSUNG
It is granted to third party manufacturers to design and produce Samsung
Electronics Co., Ltd compatible accessories. Samsung Electronics Co., Ltd is
not responsible for the design, manufacturer, quality of this accessory, for
its operation, or its compliance with safety and regulatory standards. Please
contact the accessory manufacturer for any questions regarding the accessory