THINKWARE Q200 Dash Cam Link User Guide
- June 1, 2024
- THINKWARE
Table of Contents
THINKWARE Q200 Dash Cam Link
Power the Dash Cam
Use one of the following options
The included cable options vary depending on the dashcam model purchased.
To enable Parking Surveillance mode, the dash cam needs to be powered by either the OBD-ll Cable or Hardwiring Cable (professional installation recommended).
Download the App
Download the THINKWARE DASHCAM LINK App
On your smartphone, open the Google Play Store or Apple App Store and download
and install the THINKWARE DASH CAM LINK.
Connect to the App
Follow the on-screen instructions
- Press the Wi-Fi button on the Dash Cam for at least 3 seconds.
Install the Front Camera
Open Live View in the app
- The blue line with the centre
- Green line with the front edge of the hood
Install the Rear View Camera
- Open Live View Rear Camera in the App
- Red line with the trunk centre
- Yellow line with the centre of the horizon
- Green line with the trunk line
Dash Cam Settings in the App
- Default settings out of the box
- The default settings are as follows, and you have the option to adjust them according to your preference.
FAQ & Help Desk
Still, have questions or issues?
For further assistance or to report any issues, please contact our support
team.
North America
1 844-865-9273
support@thinkware.com
United Kingdom
44 (0) 333-121-0008
support.eu@thinkware.com
European Union
(+49) 69-943-22200
support@thinkware.com
FAQs & Help Desk
Please refer to CS Information QR in the box for other countries.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>