RVLOCK R005V Remote Control Instructions
- June 16, 2024
- RVLOCK
Table of Contents
RVLOCK R005V Remote Control
Product Information
Specifications:
- Model: R005V
- Compliance: Part 15 of FCC rules
Product Usage Instructions
Disposal Process:
During the disposal process, it is important to follow the current normative
documents formulated by local legislative bodies. These documents provide
guidelines and regulations for proper disposal.
Connecting the Equipment:
To connect the equipment, follow these steps:
- Locate an outlet on a circuit different from that to which the receiver is connected.
- Plug the equipment into the outlet securely.
Seeking Assistance:
If you require any help or technical support, consider the following options:
- Contact the dealer from whom you purchased the remote control.
- Consult an experienced radio/TV technician who can provide expert assistance.
FAQ
-
Q: What compliance does the R005V Remote Control have?
A: The R005V Remote Control complies with part 15 of the FCC rules. -
Q: What are the conditions for operation?
A: The device must meet the following conditions:- The device may not cause harmful interference.
- The device must accept any interference received, including interference that may cause undesired operation.
OVERVIEW
SAFETY WARNINGS
- Do not expose the remote control to damp air.
- Do not throw the remote control from high altitude.
- Be careful not to let children and pets touch the remote control.
- This remote control uses a scrolling code. Please use the remote control code according to the operating instructions of the external wireless receiving device.
- The control of the remote control is achieved by briefly pressing the corresponding button.
- LED indicator light: Press the button to light up the indicator light, and it will turn off within 3 seconds after being released; When the battery level is low, press the button to dim the LED brightness, and at the same time, the remote control distance becomes closer; Stop working when the battery level is below 2.3V.
During the disposal process, current normative documents formulated by local legislative bodies should be followed.
Technical Parameter
- Working Mode: OOK
- Operating Frequency: 433.94MHz
- Radiation Intensity: Not exceeding 2mW
- Remote Control Distance（20±5）°С: Open environment greater than 80 meters
- Battery Model: CR2032
- Working Voltage: 3V
- Ambient Temperature: -20°С ~ +50°С
- Size: 65x33x14mm
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.
(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation。