RVLOCK R009V Remote Control Instructions

RVLOCK R009V Remote Control

Product Information

Specifications

• Product: R009V Remote Control
• Compliance: FCC Part 15

Product Usage Instructions

Connecting the Equipment
To ensure proper functionality and avoid interference, follow these steps:

1. Connect the R009V Remote Control to an outlet on a circuit different from the one to which the receiver is connected.
2. If you encounter any difficulties during the connection process, consult the dealer or an experienced radio/TV technician for assistance.

Compliance with FCC Rules
The R009V Remote Control complies with part 15 of the FCC rules. It operates under the following conditions:

1. The device may not cause harmful interference.
2. The device must accept any interference received, including interference that may cause undesired operation.

FAQ

• Q: What should I consider during the disposal process of the R009V Remote Control?
  A: During the disposal process, it is important to follow the current normative documents formulated by local legislative bodies.

• Q: What should I do if I experience interference or undesired operation?
  A: If you encounter interference or undesired operation with the R009V Remote Control, try the following steps:

  • Make sure the remote control is properly connected to a separate circuit.
  • Check for any potential sources of interference nearby, such as other electronic devices.
  • If the issue persists, contact the dealer or an experienced radio/TV technician for further assistance.

OVERVIEW

SAFETY WARNINGS

• Do not expose the remote control to damp air.
• Do not throw the remote control from high altitude.
• Be careful not to let children and pets touch the remote control.
• This remote control uses a scrolling code. Please use the remote control code according to the operating instructions of the external wireless receiving device.
• The control of the remote control is achieved by briefly pressing the corresponding button.
• LED indicator light: Press the button to light up the indicator light, and it will turn off within 3 seconds after being released; When the battery level is low, press the button to dim the LED brightness, and at the same time, the remote control distance becomes closer; Stop working when the battery level is below 2.3V.
• During the disposal process, current normative documents formulated by local legislative bodies should be followed.

Technical Parameter

• Working Mode: OOK
• Operating Frequency: 433.94MHz
• Radiation Intensity: Not exceeding 2mW
• Remote Control Distance（20±5）°С: Open environment greater than 80 meters
• Battery Model: CR2032
• Working Voltage: 3V
• Ambient Temperature: -20°С ~ +50°С
• Size: 49x36x11mm

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>