RVLOCK CO LLC R010V RV Lock BT Pro Owner’s Manual

RVLOCK CO LLC R010V RV Lock BT Pro

Product Information

Specifications:

• Charging Port: TYPE-C
• Bluetooth Pairing Button: Yes
• Work Indicator Light: LED
• RF 433 Code Matching: Yes
• Charging Method: USB-Type-C

Product Usage Instructions

Bluetooth Pairing:

1. Long press the Bluetooth pairing button for 1 second.
2. The white LED light will start flashing, indicating it’s in pairing mode.
3. On your phone, turn on Bluetooth and open the RVLOCK app.
4. In the app, click the + sign in the upper right corner to add a new device.
5. Select the Bluetooth device “RVLockBT#0x**” to start pairing.
6. Once paired successfully, the LED light will turn white.
7. If pairing is unsuccessful, the LED light will go out after 30 seconds.

RF 433 Code Matching:

1. Place the RVLockBT box next to the device that needs to be controlled.
2. Long press the RF 433 code matching button for 1 second and then release it.
3. Press the unlock or lock button on the device to match the code.
4. The device will respond accordingly in the app to confirm successful code matching.

Charging:

1. Connect one end of the USB-Type-C wire to the RVLockBT charging port.
2. Insert the other end into a charging head or USB power source.
3. The blue indicator light will flash during charging and stay on when fully charged.
4. Remove the charging cable when charging is complete.

Frequently Asked Questions (FAQ):

• Q: How do I know if the Bluetooth pairing was successful?
  A: The LED light will turn white when pairing is successful. If it remains off, the pairing was unsuccessful.

• Q: What should I do if I need to control multiple devices of the same model?
  A: Select the specific device you want to control again from the Connected Device List in the app.

Products

1. TYPE-C Charging port
2. BTBluetooth pairing button
3. led work indicator light

BT Bluetooth pairing

• Long press button1S, Whiteled The light starts to flash and enters the broadcast waiting for Bluetooth pairing. After the pairing is successful, it turns white.ledThe light will go out and pairing is unsuccessful.30Sback whiteledThe light will also go out and automatically exit the pairing mode. You can press and hold the button again.1S Enter pairing mode;
• Turn on the Bluetooth switch of your phone and turn on your phoneGPSLocate the switch and turn on the phone program

1. click the + sign in the upper right corner
2. select Add New New Device
3. Selecting a Bluetooth device select Bluetooth DeviceFound the beltRVLockBT#0x**device, and click Click > on the right to start pairing. After success, it will be Unpaired become Paired
4. If you have paired multiple devices of the same model before, you need to select the device you currently need to control again when you use it again. + → Connected Device List→ bringRVLockBT#***The Bluetooth name of the device that currently needs to be controlled. If the wrong selection is made, a pop-up will appear as shown above ×Pairing UnsuccessfulCall the police and re-select until correct.

RF 433Code matching
WillRVLockBTPlace the box next to the device that needs to be controlled and find theLearnlong press1Sand then release it, press the unlock button or lock button, and the device will corresponding response of unlocking or closing the lock indicates that the code is successfully matched.

GiveRVLockBTbox charging
WillUSB-Type-CWire, Type-C End insertionRVLockBTinto the charging port, and insert the other end into the charging head. RVLockBTThe box will automatically start charging, and the blue indicator light will flash. When charging is complete, it will stop charging. The blue indicator light will stay on. When the charging is removed, the blue indicator light will go out.

FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>