RVLOCK ANKR Quick Flag Mount Installation Guide
- August 10, 2024
- RVLOCK
Table of Contents
RVLOCK ANKR Quick Flag Mount
Specifications
- Product Name: ANKR Quick Flag Mount
- Manufacturer: RVLock
- Material: High-quality plastic and rubber
- Color: Black
- Weight: 0.2 lbs
- Dimensions: 4 inches (length) x 2 inches (width) x 1 inch (height)
Product Usage Instructions
- Thoroughly clean the surface where you intend to mount the ANKR Quick Flag Mount. Make sure the surface is free from dust, dirt, and moisture for proper attachment.
- Dampen both the RV surface and the suction cups with a wet rag. The increased moisture will enhance the bonding between the mount and the surface.
- Press the ANKR firmly against the clean, wet surface, ensuring it is positioned correctly.
- Lock the suction levers to secure the ANKR in place.
- Remove the ANKR before traveling or during heavy wind storms to prevent damage or detachment.
- Be cautious of sudden temperature changes that can affect the bonding of the ANKR to the surface.
- Always check what is below the flag mount in case the ANKR loses suction to avoid accidents.
FAQ
- Q: Can the ANKR Quick Flag Mount be reused?
- A: Yes, you can reuse the ANKR Quick Flag Mount multiple times by following the installation instructions and ensuring proper cleaning of surfaces before reattaching.
- Q: What is the weight capacity of the ANKR Quick Flag Mount?
- A: The ANKR Quick Flag Mount is designed to securely hold flags and similar lightweight items. Do not exceed its recommended weight limit of 2 lbs for optimal performance.
- Q: How do I know if the ANKR is properly attached?
- A: Ensure a strong bond by pressing firmly on the mount after installation and checking that the suction levers are securely locked in place.
INSTALLATION
Prepare the area
- A. Thoroughly clean the surface you intend to mount. If not properly cleaned, your mount will not correctly attach.
- B. Using a wet rag, dampen the RV surface and suction cups. The more wet these surfaces are, the better the bond.
Install ANKR Quick Flag Mount
- A. Press the ANKR firmly against the clean, wet surface.
- B. Secure the ANKR by locking the suction levers.
TIPS
- Always remove the ANKR before traveling or during heavy wind storms.
- Factors such as sudden changes in temperature can impact the ANKR bonding process.
- Always be aware of what is below your flag mount in case the ANKR loses suction to your intended surface.
THANK YOU for choosing RVLock, the Most Trusted Name in RV Security.
Established in Utah in 2010, we now serve the world by Protecting What Matters
Most™.
See our full array of Keyless & Mechanical handles at RVLock.com!
CONTACT
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>