V I V O DESK-SHELF55A Black Clamp on Desktop Shelving System Instruction Manual

V I V O DESK-SHELF55A Black Clamp on Desktop Shelving System

Product Information

Specifications

• SKU: DESK-SHELF55A
• Weight Capacity:
  • 6.6lbs (3kg) for the panel
  • 22lbs (10kg) for the top shelf
  • 11lbs (5kg) for the middle shelf
  • 11lbs (5kg) for the bottom shelf

Assembly Steps

1. Loosen the knobs on Clamps (I).
2. Attach Pole Left (B) and Pole Right (C) to Clamps (I) using M5x16mm Screw (S-D) and 3mm Allen Wrench (T-A). Install Clamp Pads (N) to the underside of Clamps (I).
3. Attach Pole Left (B) and Pole Right (C) to Top Shelf Support (A) using M5x10mm Screws (S-C) and 3mm Allen Wrench (T-A).
4. Attach Left Top Shelf Bracket (E) and Right Top Shelf Bracket (F) to Top Shelf (K) using M5x10mm Screws (S-C) and 3mm Allen Wrench (T-A).
5. Attach the top shelf assembly to Top Shelf Support (A) using M5x10mm Screws (S-C) and 3mm Allen Wrench (T-A).
6. Stabilize Top Shelf (K) using M5x30mm Screw (S-F) and Washer (S-A). Tighten using 3mm Allen Wrench (T-A).
7. Attach Left Side Shelf Brackets (G) and Right Side Shelf Brackets (H) to Side Shelves (L) using M5x10mm Screws (S-C) and 3mm Allen Wrench (T-A).
8. Attach side shelf assemblies to Right Pole (C) using M5x10mm Screws (S-C) and 3mm Allen Wrench (T-A).
9. Use Clamps (I) to install shelf assembly to the desktop.
10. Install Magnet Board (D) to Top Shelf Support (A) using Magnet Board Straps (M) with M6x16mm Screws (S-E) and M6 Nuts (S-B). Tighten using 3mm Allen Wrench (T-A). Place Magnets (J) on Magnet Board (D).

FAQs

What is the weight capacity of the shelves?
The weight capacity of the shelves is as follows:

• 6.6lbs (3kg) for the panel
• 22lbs (10kg) for the top shelf
• 11lbs (5kg) for the middle shelf
• 11lbs (5kg) for the bottom shelf

What is included in the package?
The package includes the following items:

• A (x1) Top Shelf Support
• B (x1) Pole Left
• C (x1) Pole Right
• D (x1) Magnet Board
• E (x1) Magnet Board Left Top Shelf Bracket
• F (x1) Right Top Shelf Bracket
• G (x2) Left Side Shelf Bracket
• H (x2) Right Side Shelf Bracket
• I (x2) Clamp
• J (x2) Magnet
• K (x1) Top Shelf
• L (x2) Side Shelf
• M (x2) Magnet Board Strap
• N (x2) Clamp Pad
• S-A (x1) Washer
• S-B (x2) M6 Nut
• S-C (x29) M5x10mm Screw
• S-D (x4) M5x16mm Screw
• S-E (x2) M6x16mm Screw
• S-F (x1) M5x30mm Screw
• T-A (x1) 3mm Allen Wrench

How do I stabilize the top shelf?
To stabilize the top shelf, follow these steps:

1. Attach the top shelf assembly to Top Shelf Support (A) using M5x10mm Screws (S-C) and 3mm Allen Wrench (T-A).
2. Stabilize Top Shelf (K) using M5x30mm Screw (S-F) and Washer (S-A). Tighten using 3mm Allen Wrench (T-A).

How do I install the shelf assembly to the desktop?
To install the shelf assembly to the desktop, follow these steps:

1. Use Clamps (I) to install shelf assembly to the desktop.

How do I install the Magnet Board?
To install the Magnet Board, follow these steps:

1. Attach Magnet Board (D) to Top Shelf Support (A) using Magnet Board Straps (M) with M6x16mm Screws (S-E) and M6 Nuts (S-B). Tighten using 3mm Allen Wrench (T-A).
2. Place Magnets (J) on Magnet Board (D).

Where can I find more information and helpful videos about this product?
You can find more information and helpful videos about this product by scanning the QR code with your mobile device or visiting the following link: https://vivo-us.com/products/desk-shelf55a

How can I get in touch with customer support?
You can get in touch with customer support by:

• Email: help@vivo-us.com
• Website: https://vivo-us.com
• Phone: 309-278-5303
• Live Chat: Visit https://vivo-us.com and chat live with an agent!

Is there a risk of tipover?
Yes, there is a risk of tipover. Use tipover restraints to reduce the risk, but it may not be eliminated completely.

Is this product safe for children?
No, this product contains small parts and is not safe for children under 3 years. Adult supervision is required.

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products /desk-shelf55a

SAFETY WARNINGS

• If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician.
• Check carefully to make sure there are no missing or defective parts.
• Improper installation may cause damage or serious injury.
• Do not use this product for any purpose that is not explicitly specified in this manual.
• Do not exceed weight capacity.
• We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

• STEP 1
  Loosen the knobs on Clamps (I).

• STEP 2
  Attach Pole Left (B) and Pole Right (C) to Clamps (I) using M5x16mm Screw (S-D) and 3mm Allen Wrench (T-A). Install Clamp Pads (N) to the underside of Clamps (I).

• STEP 3
  Attach Pole Left (B) and Pole Right (C) to Top Shelf Support (A) using using M5x10mm Screws (S-C) and 3mm Allen Wrench (T-A).

• STEP 4
  Attach Left Top Shelf Bracket (E) and Right Top Shelf Bracket (F) to Top Shelf (K) using using M5x10mm Screws (S-C) and 3mm Allen Wrench (T-A).

• STEP 5
  Attach the top shelf assembly to Top Shelf Support (A) using using M5x10mm Screws (S-C) and 3mm Allen Wrench (T-A).

• STEP 6
  Stabilize Top Shelf (K) using M5x30mm Screw (S-F) and Washer (S-A). Tighten using 3mm Allen Wrench (T-A).

• STEP 7
  Attach Left Side Shelf Brackets (G) and Right Side Shelf Brackets (H) to Side Shelves (L) using using M5x10mm Screws (S-C) and 3mm Allen Wrench (T-A).

• STEP 8
  Attach side shelf assemblies to Right Pole (C) using using M5x10mm Screws (S-C) and 3mm Allen Wrench (T-A).

• STEP 9
  Use Clamps (I) to install shelf assembly to the desktop.

• STEP 10
  Installed Magnet Board (D) to Top Shelf Support (A) using Magnet Board Straps (M) with M6x16mm Screws (S-E) and M6 Nuts (S-B). Tighten using 3mm Allen Wrench (T-A). Place Magnets (J) on Magnet Board (D).

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us

GET IN TOUCH | Monday-Friday from 7:00 am – 7:00 pm CST

help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!

Open Monday – Friday 7:00 am – 7:00 pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

www.vivo-us.com AVG. RESOLUTION TIME (within office hrs): < 15 M
Chat live with an agent!

309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S

help@vivo-us.com AVG. RESPONSE TIME (within office hrs): 1HR 8M

• 23% within < 15m
• 38% within < 30m
• 61% within < 1hr
• 83% within < 2hr
• 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

References

• Register a .US.COM domain today!
• VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
• Black 50” Clamp-on Desktop Shelving System – VIVO - desk solutions, screen mounting, and more

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>