auna 10036134 5.1 Speaker System User Manual
- June 16, 2024
- Auna
Table of Contents
auna 10036134 5.1 Speaker System
Product Information
Specifications
- Item number : 10036134
- Power supply : 230 V~ 50 Hz
- RMS power : 100 W
- Drivers : 8 + 3×5
- Frequency range : 40 Hz – 20 kHz
- S/N ratio: 75 dB
- Connectors and connectivity: RCA, 6.35-mm microphone jack, digital optical output, BT
Product Usage Instructions
Safety Instructions
General instructions :
- If the power cord or plug is damaged.
- If liquid has been spilled or objects have fallen on the unit.
- If the unit has been exposed to rain or water.
- If the unit has been dropped or damaged.
- If the performance of the unit is significantly reduced.
Special Notes on Operation
No specific information provided in the manual.
System Connection Diagram
The manual does not provide a clear system connection diagram. Please refer to the manufacturer’s website for more information.
Positioning the Speakers
a. Subwoofer : Place the sub-woofer any place on the floor. There is no directional requirement for the bass effect.
b. Front speakers: Place the front speakers in front of the listening area.
c. Surround speakers : Place the surround speakers directly to the side or slightly behind the listening area. Align them horizontally, about 1 meter above ear height.
d. Center speaker : Position the center speaker in the center of the two front speakers. Additionally, position it on or below the TV set if connecting a TV set to the unit.
Unit Controls
Front panel:
- ST.BY : Standby function key
- INPUT: Select the input
- 5.1 /2.1: 5.1/2.1 function key
- VOL : Turn down the volume
- SD /MMC CARD: SD/MMC card slot
- U DISK : USB port
- MIC 1 : Microphone connection
- MIC 2 : Microphone connection
Frequently Asked Questions (FAQ)
-
How do I connect the speakers?
- The manual does not provide a clear system connection diagram. Please refer to the manufacturer’s website for more information.
-
How do I use the BT function?
- To use the BT function, follow these steps:
-
- Turn on the unit.
- Enable Bluetooth on your device.
- Search for available Bluetooth devices.
- Select the device with the name of the product.
- If prompted for a password, enter “0000”.
-
Where can I find the latest user manual?
- You can scan the QR code provided in the manual to access the latest user manual and other information about the product.
-
What is the warranty coverage?
- The manual states that any failure caused by ignoring the items and cautions mentioned in the instruction manual are not covered by the warranty and any liability. Please refer to the warranty terms and conditions provided by the manufacturer.
-
How do I dispose of the product?
- Refer to the “Disposal Considerations” section of the manual for instructions on how to dispose of the product properly. Please follow local regulations and guidelines for electronic waste disposal.
Dear Customer ,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints to avoid damages. Any failure caused by ignoring the items and cautions mentioned in the instruction manual are not covered by our warranty and any liability. Scan the QR code to get access to the latest user manual and other information about the product.
TECHNICAL DATA
Item number | 10036134 |
---|---|
Power supply | 230 V~ 50 Hz |
RMS power | 100 W |
Drivers | 8″ + 3“x5 |
Frequency range | 40 Hz – 20 kHz |
S/N ratio | ≥ 75 dB |
Connectors and connectivity | RCA, 6.35-mm microphone jack,digital optical |
output, BT
WARNING
- The lighting flash and arrow head within the triangle is warning sign alerting you of dangerous voltage inside the product
CAUTION
- RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICIABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
- The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product
- Triangle with lightning plus explanation as follows:
DANGEROUS VOLTAGE : The lightning flash with arrowhead symbolwithin the equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Triangle with exclamation point plus explanation as follows:
ATTENTION: The exclamation point within the equilateral triangle is
intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying this
product.
SAFETY INSTRUCTIONS
General instructions
-
Lightning – If you are not going to use the unit for a longer period of time or if there is a thunderstorm, pull the plug out of the socket or disconnect the unit from the antenna connection. This will prevent damage to the unit due to lightning and overvoltage.
-
Overload – Do not overload sockets, extension cords or integralsockets as this may result in a fire or electric shock.
-
Foreign objects and liquid ingress – Never push objects of any kind into the unit through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquids of any kind on the unit.
Repair and maintenance – Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltages or other hazards. Refer all servicing to qualified service personnel.. -
Damage requiring service – Unplug the appliance from the mains and refer servicing to qualified service personnel if any of the following occurs:
(a) If the power cord or plug is damaged.
(b) If liquid has been spilled or objects have fallen on the unit.
(c) If the unit has been exposed to rain or water.
(d) If the unit has been dropped or damaged.
(e) If the performance of the unit is significantly reduced. -
Spare parts – If spare parts are required, ensure that the specialist company replacing the parts only uses spare parts that are approved by the manufacturer or have the same characteristics as the original part. Unauthorised replacement may result in fire, electric shock or other hazards.
-
Heat – Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers).
Special notes on operation
- Children from the age of 8, mentally, sensory and physically impaired persons may only use the appliance if they have been familiarised in detail with the functions and safety precautions by a supervisor responsible for them beforehand and understand the risks involved.
Before use, check that the mains cable is undamaged. If the mains cable or plug are damaged, they must be replaced by the manufacturer, an authorised specialist company or a similarly qualified person. Children should be supervised to ensure that they do not play with the appliance. Make sure that children and babies do not play with plastic bags or other packaging materials.
- Make sure that the mains plug/mains adapter always remains easily accessible so that the appliance can be quickly disconnected from the mains in an emergency.
- When you are no longer using the appliance, switch it off and unplug it from the mains.
SCOPE OF SUPPLY
- Subwoofer speaker 1 x
- Satellite speaker 5 x
- Audio cable 4 x
- User manual 1 x
- Remote control 1 x
- Optical cable 1 x
SYSTEM CONNECTION DIAGRAM
Speaker terminals
Connect front speakers, a center speaker, surround speakers to 5.1 speaker
output terminals.
- The front speaker cords to the FRONT SPEAKERS terminals.
- The center speaker cords to the CENTER SPEAKERS terminals.
- The surround speaker cords to the SURROUND SPEAKERS terminals.
NOTE : Do not leave objects generating magnetism near the speakers.
Connecting equipment
Jacks and plugs of the connecting cord are color-coded as follows: Red jacks and plugs:For the right channel of audio signals
Notes :
- Insert the plugs fully into the jacks.Loose connections may produce a humming sound or other noise interference.
- Important : Connect the speakers and all other external equipment.and finally connect the AC power cord.
Positioning the speakers
- a. Subwoofer Place the sub-woofer any place on the floor. (There is no directional requirement for the bass effect.)
- b. Front speakers
- c. Surround Speakers Place the surround speakers directly to the side or a slightly behind the listening area. Align them horizontally,about 1 meter above ear height.
- d. Center speaker Position in the center of the two front speakers.in addition. Position on or below the TV set, if connecting a TV set to the unit.
UNIT CONTROLS
Front panel
ST.BY | Stand by function key |
---|---|
INPUT | Select the input. |
5.1 /2.1 | 5.1 /2.1 function key |
Previous track in USB/SD mode | |
VOL- | Turn down the volume |
Play/Pause in USB/SD mode | |
: | Next track in USB/SD mode |
VOL+ | Turn up the volume |
SD /MMC CARD | SD/MMC card slot |
U DISK | USB slot |
MIC 1 | MIC 1 socket |
MIC 2 | MIC 2 socket |
Remote control
****| POWER switch button switch
On or off for standby
---|---
BT| BT input
5.1/2.1| 5.1/2.1 channel switch
USB/SD| USB/SD Disk
OPTICAL| Optical input
AUX| AUX input
DVD| DVD Input
LED LIGHT| The subwoofer LED flash light mode
keep pressing to close the LED light
| Play & pause when USB/SD Input
| Previous track in USB/SD mode
| Next track in USB/SD mode
SLEEP| To time on/off the speaker.
FL -/+| Turn up or turn down the front left volume.
FR -/+| Turn up or turn down the front right volume.
SW -/+| Turn up or turn down the bass volume.
CEN -/+| Turn up or turn down the center speaker volume.
VOL -/+| Turn up or turn down the master volume.
SL -/+| Turn up or turn down the surround left volume.
SR -/+| Turn up or turn down the surround right volume.
0-9| Press any key to choose the track.
REPEAT| It will repeat playing selected track if pressing once. It will repeat
playing all the tracks if pressing twice.
RESET| Reset to the default setting.
MIC +/-| Turn up or turn down the microphone volume.
ECHO +/-| ECHO Control
HOW TO USE BT
- Select the audio input to BT mode
- Search BT device with name “Areal 825”
- Connect the BT.
- If your BT device below 2.0 version, input password “0000” when
connecting.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packagingindicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.
DECLARATION OF CONFORMITY
Manufacturer :
- Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
- Importer for Great Britain: Berlin Brands Group UK Limited
- PO Box 42 272 Kensington High Street London, W8 6ND United Kingdom
Hereby, Chal-Tec GmbH declares that the radio equipment type Areal 825 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: use.berlin/10036134
For Great Britain: Hereby, Chal-Tec GmbH declares that the radio equipment type Areal 825 is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: use.berlin/10036134
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>