WAMPLER Triumph Overdrive Pedal User Guide
- June 16, 2024
- WAMPLER
Table of Contents
TRIUMPH OVERDRIVE QUICK REFERENCE GUIDE
Triumph Overdrive Pedal
The COLLECTIVE from Wampler Pedals is an exciting series of versatile pedals
with unique, huge tones, and a minimalist interface for ease of use.
The Triumph Overdrive is a versatile overdrive pedal with a flexible voicing
switch that selects between Smooth or Punch modes, giving you two uniquely
distinct flavors of overdrive.
WELCOME TO THE COLLECTIVE.
Volume: Controls the total output volume.
Gain: Adjusts the total amount of gain that is applied, turning this
control clockwise will increase the amount.
Bass / Mids / Treble : Adjust the amount of low-end / high-end
frequencies, turning clockwise will increase the levels, counter clockwise to
decrease.
Mode Switch : Select between two distinct voicings – Smooth and Punch.
Power: This pedal was designed around the usage of a 9-18V DC power
source only. To avoid damage to the pedal, do not exceed 18V DC, do not use
center pin positive adapters, and do not use AC power. Use only a 9V DC power
source that is intended for guitar pedals. This pedal draws approximately 21mA
at 9-18V.
WAMPLER Pedals Limited Warranty
WAMPLER offers a 5 year warranty to the original purchaser that this WAMPLER
product will be free from defects in material and workmanship. A dated sales
receipt will establish coverage under this warranty. This warranty does not
cover service or parts to repair damage caused by accident, neglect,normal
cosmetic wear, disaster, misuse, abuse, negligence, inadequate packing or
shipping procedures and service, repair or modifications to the product, which
have not been authorized by WAMPLER. If this product is defective in materials
or workmanship as warranted above, your sole remedy shall be repair
replacement as provided below.
RETURN PROCEDURES In the unlikely event that a defect should occur, follow the
procedure outlined below. Defective products must be shipped, together with a
dated sales receipt, freight pre-paid and insured directly to WAMPLER SERVICE
DEPT – 5300 Harbor Street, Commerce, CA 90040, USA. A Return Authorization
Number must be obtained from our Customer Service Department prior to shipping
the product. Products must be shipped in their original packaging or its
equivalent; in any case, the risk of loss or damage in transit is to be borne
by the purchaser. The Returns Authorization Number must appear in large print
directly below the shipping address. Always include a brief description of the
defect, along with your correct return address and telephone number. When
emailing to enquire about a returned product, always refer to the Return
Authorization Number. If WAMPLER determines that the unit was defective in
materials or workmanship at any time during the warranty period, WAMPLER has
the option or repairing or replacing the product at no additional charge,
except as set forth below. All replaced parts become a property of WAMPLER.
Products replaced or repaired under this warranty will be returned via ground
shipping within the United States freight prepaid. WAMPLER is not responsible
for costs associated with expedited shipping, either to WAMPLER or the return
of the product to the customer.
INCIDENTAL OR CONSEQUENTIAL DAMAGE In no event is WAMPLER liable for any
incident or consequential damages arising out of the use or inability of the
possibility of such damages, or any other claim by any other party. Some
states do not allow the seclusion or limitation of consequential damages, so
the above limitation and exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other
rights which may vary from state to state.
FOR YOUR PROTECTION Please complete the online warranty registration
within (10) ten days of the date of purchase so that we may contact you
directly in the event of a safety notification issued in accordance with the
1972 Consumer Product Safety Act.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantees that interference will not occur in
a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experience radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s warranty to operate the equipment.
CUSTOMER SUPPORT
Our dedicated staff are ready to help you with any warranty or product questions – please email us at help@wamplerpedals.com or callus on 765-352-8626 Please remember to register your pedal as soon as possible after purchase at the following web page to ensure quicker service if you should ever need to make a warranty claim: wamplerpedals.com/warranty-registration
https://www.wamplerpedals.com/downloads/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>