V I V O DESK-SHELF3CL Clamp on Shelving Unit for Desk Instruction Manual
- June 16, 2024
- V I V O
Table of Contents
V I V O DESK-SHELF3CL Clamp on Shelving Unit for Desk Instruction Manual
WARNING : CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
-
A (x2) Exterior Shelf
-
B (x2) Side Wall
-
C (x1) Back Wall
-
D (x2) Interior Shelf
-
E (x1) Clamp
-
F (x6) Sticker
-
S-A (x8) Cam Lock Screw
-
S-B (x8) Cam Lock Nu
-
S-C (x6) ST3.9x25mm Screw
-
S-D (x8) Pin
-
S-E (x4) M5x18mm Screw
-
S-F (x4) M5 Washer
ASSEMBLY STEPS
Install Cam Lock Screws (S-A) into one Exterior Shelf (A) using a Phillip
screwdriver. Ensure the screws are fully threaded into the shelf and seated
upright.
Slide Side Walls (B) onto the installed Cam Lock Screws (S-A).
Ensure overhang of Exterior Shelf (A) is on the same side as pilot holes of
Side Walls (B)
Insert Cam Lock Nuts (S-B) into Side Walls (B) with the opening facing down
towards the head of Cam Lock Screws (S-A). Tighten Cam Lock Nuts (S-B)
clockwise using a Phillips screwdriver making sure to only turn the nut 180
degrees.
Install Cam Lock Screws (S-A) into remaining Exterior Shelf (A) using a
Phillips screwdriver. Ensure the screws are fully threaded into the shelf and
seated upright. Turn Exterior Shelf with Cam Lock Screws (S-A) upside down and
place on top of Side Walls (B).
Ensure overhang of Exterior Shelf (A) is on the same side as pilot holes of Side Walls (B).
Insert Cam Lock Nuts (S-B) into Side Walls (B) with the opening facing downwards the head of Cam Lock Screws (S-A). Tighten Cam Lock Nuts (S-B) clockwise using a Phillips screwdriver making sure to only turn the nuts 180 degrees.
Attach Back Wall (C) to the shelf assembly using ST3.9x25mm Screws (S-C) and a
Phillips screwdriver. Use Stickers (F) to conceal the cam lock holes.
Remove the protective film from the silicone pad on inside of Clamp (E).
Install Clamps (E) to Back Wall (C) using M5x18mm Screws (S-E), M5 Washers
(S-F), and a Phillips screwdriver. In assembly shown below, clamp will be used
on right desk leg. Clamp can be flipped 180 degrees and installed the opposite
direction to be utilized on the left side.
Clamp assembly to desired location on desk leg. If using a height-adjustable desk, lower the frame to its lowest position before clamping onto the leg to ensure the shelf will not collide with obstructions throughout the entire range of motion on the desk.
Determine desired shelf heights before continuing. Place Pins (S-D) into Side
Walls (B) at desired heights.
Place Interior Shelves (D) onto installed Pins (S-D).
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Black Clamp-on Shelving Unit for Desk – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>