THERMALRIGHT FROZEN EDGE High Performance PWM Fan User Manual

Waterblock/Fan Guide

• Connect PUMP power cable to motherboard WATER PUMP or CPU OPT socket Connect fan power cable to FAN HUB, then connect FAN HUB to CPU FAN socket on motherboard
  Waterblock RGB lighting can be control by motherboard by connecting lighting cable to 3-pin ARGB socket on motherboard.
  Waterblock LOGO plate can be rotated.

Fan&Radiator Mounting

Use long fan mounting screws to install fans on the radiator.

Please adjust the fan exhaust side according to your case airflow config.

Use short radiator mounting screws to install radiator to the case.

AMD AM4 AM5 Installation’

• Remove factory CPU brackets and screws, KEEP the backplate.
• Install four AM4/AM5 standoffs on backplate.
• secure two AM4/AM5 brackets with four AM4/AM5 screws.
• Apply thermal compound on CPU IHS.
• Secure waterblock on CPU with two nuts on waterblock bracket.

INTEL LGA20XX Installation

• Install four Intel LGA20XX screws on motherboard ILM
• Install two Intel brackets on LGA20XX screws, secure them with nuts.
• LGA20XX mounting hole on Intel brackets.
• Apply thermal compound on CPU IHS.
• Secure waterblock on CPU with two nuts on waterblock bracket

INTEL LGA1700 Installation

• Install assembled Intel backplate from back side of motherboard
• Install four 17XX standoffs through backplate screws from front side of motherboard
• Install two Intel brackets on standoffs, secure brackets with four nuts.
• Apply thermal compound on CPU IHS.
• Secure waterblock on CPU with two nuts on waterblock bracket

INTEL LGA115X/1200 Installation

• Install assembled Intel backplate from back side of motherboard.
• Install four 115X standoffs through backplate screws from front side of motherboard
• Install two Intel brackets on standoffs, secure brackets with four nuts.
• Apply thermal compound on CPU IHS.
• Secure waterblock on CPU with two nuts on waterblock bracket

INTEL LGA 17XX Backplate Assemble

If your motherboard is a 1700 motherboard, please pull the plastic buckle to the 1700 slot, Refer to the figure on the left below;

If your motherboard is a 115X or 1200 motherboard, please pull the plastic buckle to the 115X slot, Refer to the figure on the right below.

115X/1200

1700

Components

A240X2 Fan 280X2 360X3

BINTEL Bracket X2| CINTEL115X/1700 Backplate X1| DAM4/AM5 Bracket X2
E115X Black Standoffs X4| F1700 Blue Standoffs X4| GLGA20XX Screw X4| HINTEL nuts X4| |
IFan mounting screw 240X8 280X8 360X12| JRadiator mounting screw 240X8 280X8 360X12| KThermal Compound X1| LFAN HUB X1| MAM4/AM5 Screw X4| NAM4/AM5 Red Standoffs X4

HAZA.RORA.DA.STA.POST.WEKAAAAAAA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>