THERMOROSSI CHICCA Pellet Stoves Instruction Manual
- June 16, 2024
- THERMOROSSI
Table of Contents
THERMOROSSI CHICCA Pellet Stoves
Product Information
Specifications
- Trademark: THERMOROSSI
- Model: CHICCA
- Compliance: EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, EN 60335-1, EN 60335-2-102, EN 62233, EN 50581, EN 14785
- Tested by certified laboratory Kiwa Cermet Italia S.p.a (N.B. 0476)
- Heat Output: 7.20 kW
- Efficiency: A+
- Dimensions: 826mm x 630mm x 514mm
- Weight: 129kg
Product Usage Instructions
Safety Warnings
Follow the safety warnings mentioned in section 1.1. Ensure that the
product is installed in a well-ventilated area, free from humidity and salt.
High humidity or saltiness in the environment can affect the performance of
the product. Keep flammable items away from the product.
Safety Standards
The product complies with the following safety standards:
- EN 55014-1
- EN 55014-2
- EN 61000-3-2
- EN 61000-3-3
- EN 60335-1
- EN 60335-2-102
- EN 62233
- EN 50581
- EN 14785
General Warnings
Refer to section 1.4 for general warnings and precautions.
Pellet Usage
Pellet Types
The product uses pellets as fuel. Ensure that only suitable pellets are
used, as specified in the user manual.
Pellet Refilling
To refill the pellet, follow these steps:
- Refer to Figure 1 for the location of the pellet hopper.
- Open the pellet hopper lid.
- Carefully pour the pellets into the hopper, ensuring not to overfill it.
- Close the pellet hopper lid securely.
Equipment Placement
When placing the product, consider the following:
- Follow the general warnings mentioned in section 1.4.
- Ensure proper ventilation around the product.
- Avoid placing the product near flammable materials.
- Maintain the recommended distance to combustible materials: Rear = 200mm, Sides = 200mm, Front = 800mm.
FAQ
Q: What safety standards does the product comply with?
A: The product complies with EN 55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3, EN 60335-1, EN 60335-2-102, EN 62233, EN 50581, and EN 14785.
Q: How should I refill the pellet hopper?
A: To refill the pellet hopper, follow the steps mentioned in section 4.2
of the user manual.
Q: What is the recommended distance to combustible materials?
A: The recommended distance to combustible materials is Rear = 200mm, Sides
= 200mm, Front = 800mm.
ITALY Fax 0445.741657
www.thermorossi.com
info@thermorossi.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>