VANKYO BURGER 101 User Manual

June 7, 2024
VANKYO

logo

VANKYO BURGER 101

product

PACKING LIST

image 1

**NOTICE

image 2** FUNCTION OVERVIEW

image 3

image 4

GETTING STARTED

Turn On

  1. Plug the power cable into the projector and the socket.image 5
  2. Switch the ON/OFF Switch to ON.
  3. Press the Power button to tum the projector on.image 6

Turn Off

  • Press the Power button once, then select Confirm to turn off the projector.
  • Switch off the ON/OFF Switch to OFF.

Battery
This projector is equipped with the built-in Li-ion rechargeable battery which can provide power supply to other mobile devices through the USB port when needed. support@ivankyo.com

Charging
Fully Charged: LED Off Charging: Blue LED

IMPORTANT:

  • To avoid turning on the projector accidently which may lead to electrical fires, switch the ON/OFF Switch to OFF.
  • Do not use it as a projector and power bank at the same time.
  • Always connect your projector to power or charge it timely when the battery is low.

FOCUS AND KEYSTONE

Slightly adjust the focus ring on the projector to get the best image.

image 7

The projector supports automatic vertical Keystone correction within a degree of ±40 .

image 8

WIFI CONNECTION

image 9

  1. Go to Homepage> Setup> Network> WiFi, then select Scan to display the WIFI list.
  2. Press the Up/Down button to select your WIFI, then press the OK button to continue.
  3. Enter the correct password, then select Confirm to get Internet connection.

MULTIMEDIA CONNECTION
Projecting from a USB Disk

  1. Turn on the projector and insert your USB disk into the USB port.
  2. Go to Homepage to select Media, it will display an interface for projecting from a USB Disk.image 10
  3. Select the category of the file you would like to project accordingly.
    • To play the video, select Movie, then find your video file and play it by pressing the OK button. To watch3D video, please press the 30 button on the remote when playing it (3D video source is required and 3D glasses are not included).
    • To play the audio file, select Music to find your audio file. Select it first by pressing the OK button, then select the Play option to start playing.
    • To project photo, select Photo, then find your photo and play it by pressing the OK button.
    • To project text, select Text, then find your text file and open it by pressing the OK button.

Different File Formats Supported
Text Format Supported: m
Image Format Supported: J PG/JPEG/BMP/PNG
Audio Format Supported: MP l/MP2/MP3/WMA/WAV/OGG/FLAC/AAC/M4A
Video Format Supported: MPEG1/MPEG2/MPEG4/H.264/MVC/H.263/DAT/MPG/VOB/TS/AVI/M’rW/MP4/MOV/3GP/FLV

Projecting from HDMI Input Connection

  1. Turn on the projector, then connect the projector to your device with the provided HDMI cable.
  2. Go to Homepage, then select HDMI to project the contents from your device to the screen/wal

image 11

Play Videos in KOALA and YouTube
Go to Homepage> KOAL.A/YouTube to play videos after the projector is connected to your WIFI. Tip:
Press the Menu button on the remote to get back to the Home Page of KOALA/YouTube.

SCREEN MIRRORING

For iOS System

  1. Connect your iOS device and the projector to the same WIFI network.
  2. Go to Homepage> iOS Cast to display the following interface.image 12
  3. Swipe your iOS device up, then tap Screen Mirroring/AirPlay Mirroring and search for the projector.
  4. Select zvcast-xxxx(icast) from the searching list.
  5. Your iOS device display will be projected on the wall/screen.

For Android system
To activate this function, please make sure your android device supports Multi-screen/Wireless display. Names may differ from different Android devices.

  1. Turn the WIFI to ON status in the settings of your Android device. To make a smoother streaming, please do not connect to any WI Fl on your projector.
  2. Go to Homepage> Mira cast to enter the following interface.image 13
  3. Activate Multi-Screen function in your Android device and search for the projector.
  4. Select ZVCast-xxxx(mcast) from the searching list.
  5. Your Android device display will be projected on the wall/screen.

SCREEN CASTING (For iOS System Only)

  1. Connect your iOS device and the projector to the same WIFI network.
  2. Select Setup on the homepage, enter Advanced > iOS Play Mode, then press the right button on the remote to select screen casting HD/SD.
  3. Go to Homepage> iOS Cast on the projector.
  4. Launch a video player on your iOS device and select a video to play.
  5. Tap > Airplay & Bluetooth devices> ZVCast-XXXX(icast) to cast the video on your iOS device to the wall/ screen via the projector.

image 14

Tips:

  • Once the video is casted to the wall/screen, you can close the app and do other things without interrupting the video as long as your iOS device is still connected.
  • Always connect your projector to power.

SETTINGS

Go to Homepage > Setup to adjust the settings of your projector.

Network
Connect the projector to your WI Fl.
Projection
Set up brightness mode, brightness level, projection mode, Keystone configurations etc ..
Advanced
Change language, select boot source, set up sleep timer, select iOS Play Mode, update firmware, make a factory restore, etc.
Information
Check the memory, software version, etc.

image 15

Specifications

image 16

North America support@ivankyo.com
United Kingdom support.uk@ivankyo.comDeutsch land  support.de@ivankyo.com
France  support.fr@ivankyo.com
Italia support.it@ivankyo.com

logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals