ECHOMASTER P-BUA-SUPER DUTY Wiring Harness for Backup Alarm 2017-2021 Ford Super Duty Pickup Instructions
- June 9, 2024
- Echomaster
Table of Contents
ECHOMASTER P-BUA-SUPER DUTY Wiring Harness for Backup Alarm 2017-2021 Ford
Super Duty Pickup Instructions
Thank you for purchasing the
P-BUA-SUPER DUTY
Page 3 – Tools Required For Installation
WHAT’S INCLUDED
- Vehicle Specific Wire Harness (P-BUA-SUPER DUTY)
COMPATIBLE ACCESSORIES
- 97dB Backup Alarm (BUA-97C)
- 97dB White Noise Backup Alarm (BUA-97WNC)
TOOLS REQUIRED:
-
10mm Nut-setter
-
Impact Drill
-
Diagonal Cutters
Instructions
STEP 1: Locate the OEM inline connector that is on the inside of the
passenger side frame rail
STEP 2: Unplug the OEM connector and install the P-BUA-SUPER DUTY harness
between the OEM connectors
STEP 3: Route the harness over the top side of the frame rail, toward the
curb side of the truck
STEP 4: Use an impact drill and 10mm nut-setter to install a compatible
backup alarm on the underside of the vehicle
Note: (2) 10mm TEK screws are provided with the compatible backup alarm
STEP 5: Plug the backup alarm connector into the mating connector on the
P-BUA-SUPER DUTY harness. Secure any excess wiring with cable ties. Use
diagonal cutters to remove excess cable tie material.
STEP 6: Test the backup alarm.
Support
Phone – 866-766-2267
E-Mail – support@aampglobal.com
EchoMaster is a Power Brand of AAMP Global
EchoMaster.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>