LUCIDE 28113 CERES-LED Flush Bathroom Ceiling Light Instruction Manual
- June 4, 2024
- LUCIDE
Table of Contents
LUCIDE 28113 CERES-LED Flush Bathroom Ceiling Light
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting. Welcome to the community of #illuminatesyourworld.
General
- Dimensions LxW xH: 21,5cm x 21,5cm x 5cm Main material: Aluminum
- Color: White
- Style: Modern
- Shape: Square
- Weight: 1,0 8kg
Specifications
- Dimmable: Yes
- Light direction: Around (Diffuse)
- Adjustable in height: Not In Height Adjustable Directional: Not Directional
- Cable: No Cable On Product
- Sensor: Without Sensor
- Control: Light Switch Control
- Power supply: Adapter/ Power Grid
- IP-Class: 44
- Electric Class: 2
- Number of light sources: 1
- Lamp socket: Integrated LED
- Maximum wattage: 30 W
- Power requirements: 220 -240 V~50 Hz Lumen: 240 0 Lm
- Colour temperature: 30 0 0 K
- Beam angle (if directional): 120 °
- Color Rendering Index: 80
- Expected lifetime: 30 0 0 0 h
- Warranty: 3 Years
For more specifications of this product please visit: www.lucide.com
Dimensions
Installation of items in the Bathroom
The explanation of the IP ratings can be found in the safety instructions.
CERES-LED
Safety Instructions for bathroom items
Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician. Always isolate the power before commencing installation, maintenance or repair. In case of doubts, please contact a qualified electrician. Please pay attention to locations where the item can be installed (indoor, outdoor, and bathroom (for outdoor and bathroom installation, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products. During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician. This is to avoid all risks. Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).
Symbols
Explanation of the symbols which can appear on the fixture
This item is only suitable for indoor use, exclusive bathroom. (except if a
higher IP degree permits that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling. Electrical and electronic equipment marked
with this symbol indicates a separate collection of such equipment must be
returned to a municipal waste collection point.
Class I: The item has an earth connection. The earth wire (green-yellow)
needs to be connected to the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the
earth wire.
Class III: The item is only suitable for lower voltage supply and must
not be connected to the earth wire.
IP 21: protection against dripping water
IP 44: Splashproof
IP 54: Dust protected and splashproof
IP 65: Dust-tight and protected against water jets
If the protection glass is damaged or broken, it needs to be replaced
immediately.
Please respect the minimum distance from the bulb to inflammable objects.
Support
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM info@lucide.com tel: +32(0)3 366 22 04 www.lucide.com