TUNZE 6020 Introduce Novel Flow Deflector Instructions

TUNZE 6020 Introduce Novel Flow Deflector

Product Information

Specifications

• Brand: Aquatic Eco Engineering
• Model: 6020 / 6040
• Expiration Date: 12/2023

Description **

**

The Aquatic Eco Engineering 6020 / 6040 is a versatile and efficient pump designed for use in aquariums. It offers various functions and features that enhance water circulation and create a healthy environment for aquatic life. The Turbelle® nanostream® 6020 and 6040 are highly compact circulation pumps for aquariums from 20 to 500 liters (5 to 132 USgal.). They can be easily concealed behind the decoration, and thus ensure the harmonious overall appearance of small aquariums, which makes them absolutely perfect for aqua- scaping. Thanks to the special flow deflector and Magnet Holder, the wide water jet offers a 3D adjustability at the pump outlet. Through the Silence Holder they don‘t directly touch the aquarium glass pane, and are therefore unable to transmit vibrations, making them one of the quietest pumps available on the market. These quiet and energy efficient pumps are particularly maintenance-free thanks to their „Self-Cleaning-System“. The Turbelle® nanostream® 6020 (1) is a non-controllable synchronized motor pump with a very gentle circulation performance. The TUNZE® HUB EDITION Turbelle® nanostream® 6040 (2) is our smallest speed-controlled circulation pump, can be controlled electronically and has been provided with a fish-care function. It comes standard with an included power supply unit, 12V SELV (safety extra-low voltage). This pump is equipped with the Turbelle® Controller 7020 (3) to adjust the pump performance and for access to the TUNZE® HUB. Using this cloud solution, many devices from TUNZE® and other manufacturers can be clearly controlled and regulated via WiFi and the Internet. An integrated real- time clock prevents time shifts due to power failure.

Safety Instructions Device **

**

Before using the Aquatic Eco Engineering 6020 / 6040, please read and understand the following safety instructions:
The device is only suitable for use in dry interior rooms. Do not use it in swimming pools or other wet environments. The pump may not be used in swimming pools.
Protect the plug contacts from moisture to prevent electrical hazards.

Do not kink or crush the cable to avoid damage and potential electrical issues.

Do not attempt to repair a damaged mains cable. If the cable is damaged, it should be replaced. Before working in the aquarium, please make sure that all electric units used have been disconnected from the mains.
The water temperature must not exceed 35°C (95°F) (4).

The connection to devices, such as electronic switches or speed controllers, of other makes is not permissible! (5)

Children are not allowed to play with the device (6). If they are supervised or have been instructed in the safe use of the device and understand the resulting dangers, this device can be used by children aged 8 years and older as well as by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge. Cleaning and user maintenance shall not be made by children without supervision. Do not connect the device to other devices, such as electronic switches or speed controllers, of different brands. This may result in compatibility issues or damage to the device. Keep the device out of reach of children. It is not intended for play. Children aged 8 years and older, as well as individuals with reduced physical, sensory, or mental abilities, can use the device under adult supervision and after receiving proper instructions on its safe use.

Safety instructions — Power supply
Prior to initial operation, please check whether the operating voltage corresponds to the mains voltage available.
Pumps with power supply unit: Only use the included power supply unit.
In order to prevent damage from water, the power supply (unit) should be placed above the waterline if possible, but not directly above the water. Place at least one drip loop in front of the power supply (unit).

Operation of the power supply unit only in dry interior rooms.

Temperature: 0-35°C (32-95°F)
Humidity: up to 95% relative humidity, no condensation
Operation is permitted only with a residual-current-operated circuit-breaker max. 30 mA.

Safety instructions — Magnet holder
The magnet holder contains very strong magnets. Caution! Risk of injury! (4)

Do not bring magnet halves directly together. Use spacers for storage and transport.
Only grip magnetic parts from the side. Never put your fingers between the magnet parts. (5)

Magnet attracts surrounding metal parts. Make sure that there are no other, especially sharp and pointed, metal parts within 10 cm (3.9”) of the perimeter. Keep magnet-sensitive devices (implants, pacemakers, data carriers, …) at least 30 cm (11.8”) away.
Temperatures above 50°C (122°F) can damage the magnet (6).

Technical specifications

Turbelle® nanostream® 6020 for aquariums from 40 to 250 liters (10 to 66 USgal.).

• Circulation performance: approx. 2,500 l/h (660 USgal./h). Power consumption: 4 W

• Voltage / frequency: 230V/50Hz (115V/60Hz)

• Cable length: 2 m (79”)

• Dimensions without flow deflector:  65 mm x 60 x 72 mm (2.55” x 2.36” x 2.83”)

• Outlet: ø40 mm (1.57”)
  Silence Magnet Holder up to a glass thickness of 12 mm (1/2”). Turbelle® nanostream® 6040 for aquariums from 20 to 500 liters (5 to 132 USgal.) Circulation performance: approx. 200 to 4,500 l/h (53 to 1,188 USgal./h).

• Power consumption: 1.5 – 13 W

• Power supply: 100-240V / 50-60Hz

• Cable length: 3 m (118”) to the Turbelle® Controller 7020

• Dimensions without flow deflector and Magnet Holder: 60 x 43 x 68 mm (2.36” x 1.69” x 2.68”)

• Outlet: ø40 mm (1.57”)
  Silence Magnet Holder up to a glass thickness of 15 mm (2/3”).

Illustration of parts

Scope of delivery and parts list

| 6020.000| 6040.005 Turbelle ® nanostream ® **Turbelle ® nanostream ®**
---|---|---
1| 6020.100| 6040.105| Motor block|
2| 6020.130| | Discharge ring|
3| 6020.136| | Silicone stopper|
4| 3163.770| 3163.770| Flow deflector|
5| 6015.700| 6055.700| Drive unit|
5a| 6055.740| 6055.740| Bushing and attenuation disk|
6| 6025.512| 6025.515| Magnet holder|
6a| 6020.507| 6020.507| 2 magnetic suction rings|
7| 6020.620| 6020.620| Silicone buffer 14mm (0.55 in.)|
8| | 5012.010| Power supply unit 12V DC|
9| | 6040.019| Cable guard|
10| 7020.500| 7020.500| Turbelle® Controller 7020|
11| 7020.400| 7020.400| Wall mount for controller|

Optional accessories

Product Usage Instructions

Preparation
Before using the Aquatic Eco Engineering 6020 / 6040, follow these steps for preparation:

1. Ensure that all electric units used in the aquarium are disconnected from the mains.
2. Place the pump fully immersed in the water. It should not be operated outside of the water.

Preparation 6020 / 6040
The Turbelle® nanostream® only requires minor preparation before it can be used in the aquarium.
Press the four supplied silicone buffers into the special openings on the even surface of the pump (1).

Press the four round holes of the Magnet Holder onto the four silicone buffers (2).

Mount one of the two rubber rings onto the magnet (3), which may be the grey or blue one depending on the desired color.

Mount one of the two rubber rings onto the magnet (3), which may be the grey or blue one depending on the desired color.
Mount the supplied flow deflector (4) onto the pump outlet – the pump will now be ready for use.

HANDLE THE MAGNETIC HOLDER WITH CAUTION! Prepare the magnet and pump individually in sequence and place them far apart from each other to avoid injuries!

Commissioning 6020 / 6040
Prepare a suitable place for the pump on the glass pane, keeping in mind that this pump is intended for a placement behind the decoration (1).

In the aquarium the glass pane should be free of algae, and the outer surface should be dry and clean. (The outside part of the magnet holder is as waterproof as its inside part, consequently it can also be attached under water, e.g. when used on drainage shafts / overflow installations, in filter tanks, etc.) Attach the pump to the aquarium glass (2) with the rubber ring facing in the direction of the aquarium glass pane.

Hold the outer part of the Magnet Holder towards the pump (3) and then carefully bring them together.

To move the pump to a different position without damaging the rubber ring, the external magnet should be lifted slightly from the glass.
Adjust the flow angle to the desired flow direction. The pump doesn‘t need to be attached vertically, it is however of the utmost importance to make adjustments that will create a proper circular flow (4).

It is also able to work without the flow deflector 3163.770, and thus creates a wider flow (WIDE FLOW). Initial running noises of the pump will be reduced after a one or two week break-in period.

Initial Operation

Follow these steps for the initial operation of the Aquatic Eco Engineering 6020 / 6040:

1. Connect the pump to a power supply.
2. Ensure that all connections are secure and properly fitted.
3. Switch on the pump and observe its performance.

Initial operation applicable only for Turbelle® nanostream® 6040

Plug the connector (1) from the power supply 5012.010 (2) into the appropriate socket (3) on the Turbelle® controller 7020, then connect the power supply to the plug (4). An additional pump with Turbelle® Controller 7020 (6) can be connected to the jack connector (5) of the Turbelle® controller 7020 via a 3-pin jack cable (7), for example 7020.300. The wall mount (8) of the Turbelle® Controller 7020 can be attached to smooth walls with the supplied adhesive strips (9) or screwed (10) to a rough wall (screws not included). The Turbelle® Controller 7020 may under no circumstances be attached directly above open water (11). Mount the Turbelle® Controller 7020 above the water surface or insert a drip loop in the cable layout (12), to avoid water damage to the device from drops flowing down the cable.
Caution: When connecting the pump to the Turbelle® Controller 7020, pay attention to the white dot and groove! (13)

Automatic shut-down:
The pump will be stopped immediately in case of blockage or if the system runs dry. After the blockage has been removed, the pump will start up automatically after a delay of 30 seconds. The pump control is thermally protected. The power supply unit is protected against short-circuit and thermal overload.

Product description
Turbelle® Controller 7020
The Turbelle® nanostream® 6040, as well as some sister models, are controlled by the Turbelle® Controller 7020. It enables the variable pump performance to be adjusted, as well as access to the TUNZE® HUB. Using this cloud solution, many devices from TUNZE® and other manufacturers can be clearly controlled and regulated via WiFi and the Internet. The pump performance, a feeding pause and a wave motion simulation or pulsating flow can be set on the Turbelle® Controller 7020 via the control panel. Automatic pulse time adjustment makes it easier to find the best pulse frequency for a visible wave motion. A diurnal rhythm and extensive measurement and control tasks can be programmed via the cloud. Thus, complex flow patterns such as tides with night-time reduction can be created with several pumps. Two Turbelle® Controller 7020 can be connected with a jack cable, e.g. 7020.300. This allows a “leader/follower” configuration for synchronous or inverse pulse operation to be created independently of the Internet (chapter “Turbelle® Controller 7020 as LEADER and FOLLOWER”).

Basic Functions **

**

The Aquatic Eco Engineering 6020 / 6040 offers several basic functions to enhance water circulation in your aquarium:

Pulse Operation: The pump can be set to operate in a pulsating mode, creating alternating water currents.
Wave Motion: This function simulates natural wave patterns in the water, promoting a more realistic aquatic environment.
Leader and Follower: The pump can be used as a leader or follower, allowing for synchronized water movement in multiple areas of the aquarium.

1. “Food timer” button (1): Switches off the pump for 10 minutes to give the fish time to eat undisturbed. After 10 minutes or by pressing the button again, the pause ends and the pump starts again. The food timer can be adjusted via the TUNZE® HUB, e.g. the pump operates at reduced power for 10 minutes.

2. “Mode” button (2): Allows to select the control mode. “Cloud” (2a) uses control via the TUNZE® HUB. The second (right) LED (2b) shows the WiFi connection. If this LED no longer flashes, the controller has a stable WiFi connection. “Manual” (2c) allows the pump to be adjusted using only the controller buttons. “Analog” (2d) allows control via a ø3.5 mm (0.14”) jack cable, e.g. 7020.300 through another Turbelle® Controller 7020, or via another device with a 0-10V control signal.

3. In “Manual” mode (2c): The “Min. Power” (4a) and “Max. Power” (4b) buttons allow the pump power to be adjusted in 5% increments by pressing the “–” (3a) and “+” (3b) buttons. The segments each show 10% of the total performance. If a segment flashes during the setting, this signals the 5% increment.
   Pulse operation with the Turbelle® Controller 7020

4. In “Manual” mode (2c): The “Pulse duration” button (6) enables the setting of flow pulses with a cycle time of 0 to 20 seconds. The performance should be checked before setting the pulse operation. In order for pulse operation to be visible, the power of “Min. power” (4a) and “Max. power” (4b) must be set different and a cycle time greater than zero.
   The “Pulse duration” (6) LED lights up, while the “Manual” LED (2c) flashes. By pressing the “-” (3a) and “+” (3b) buttons, the cycle time can be set in 1-second increments. Pulse is off if no LED lights up. A permanently lit segment in the LED display (7) corresponds to a pulse time of 2 seconds, a flashing one represents 1 second.

5. Activate or deactivate the key lock or child lock: Press the “-” (3a) and “+” (3b) buttons simultaneously for 3 seconds.
   Wave motion with the Turbelle® Controller 7020

6. In “Manual” mode (2c): The “Wave search” button (5) activates the automatic search for visible waves in the aquarium. These are only visible at certain cycle time frequencies (resonance frequencies of the aquarium). The search generates cycle time frequencies of 0-2 seconds in very small steps to create visible waves. When a visible wave appears, press “Wave search” (5) again to save the current cycle time. To achieve the greatest possible wave motion, set Min. power (4a) on the controller so that no segment (0%) lights up. The Max. power (4b) should be preset to 10 segments (100%). To optimize the wave height, the “-” button (3a) can be pressed during the search. This shortens the cycle time in small steps. The cycle time is extended accordingly using the “+” button (3b). Pressing the + or – button multiple times increases the step size in the respective direction. Most aquariums support multiple visible waves with different cycle times, with the first wave being higher than subsequent waves. The wave height also depends on the structure of the aquarium, i.e. the arrangement of stones, roots, corals and plants.

Connection of theTurbelle® Controller 7020 with the TUNZE® HUB

To configure the devices, the SmartController must be connected to the Internet and a TUNZE® HUB account. If you do not yet have a TUNZE® HUB account, create a new account at tunze-hub.com. Plug in the power supply of the device. Switch to “Cloud” using the “Mode” button on the controller. Log in to the network TZ7000 – [serial number] with a WiFi- enabled device using the password “password”.

This network has no Internet, so make sure that your end device stays connected.
Now go to the browser and enter the IP address 192.168.100.1 of the device. The configuration page of the device appears (1).

In this menu you can:

1. Preset the time zone as an offset to UTC, activate daylight saving time or synchronize with the time of the end device. The setting can also be accessed later via the cloud.
2. Link to your TUNZE® HUB account.
3. Establish/change the connection to your router.
4. To change the language, select “language” in the header.
5. With a click on the cog wheel under the item “cloud connection” you get to link the device with your TUNZE® HUB account. Give the device a name under which it should be managed in the cloud. Now enter the user name and password of your TUNZE® HUB account and click on “apply”.
6. Now select the WiFi network to be used by the device under “WiFi connection”. Click on the cogwheel. A list of networks in range appears. Select the desired network. Alternatively, enter the name/SSID of the network directly. Enter the password and click on “apply”.
7. Now restart the device using the “restart” button in the main menu. The device connects to the selected WiFi and the cloud. You can now find it in your device overview in your account.

Activate hotspot: To reactivate the hotspot for reconfiguration from WiFi operation, the “Mode” button can be pressed for 5 seconds. The controller’s hotspot will then become visible again and the WiFi status LED will flash.

Turbelle® Controller 7020 as LEADER and FOLLOWER

With the cable 7020.300, the Turbelle® controller 7020 (1) can control another Turbelle® pump (2) simultaneously. This cable can also be used for more precise synchronization when controlling in the cloud. In this case the first pump with the associated Turbelle® Controller 7020 (1) is referred to as LEADER; the various settings are made on this controller. The second pump (2) is called FOLLOWER and its Turbelle® Controller 7020 is set to “Analog” using the “Mode” button. Turbelle® Controller 7020 in the inverse operation (3): If a second Turbelle® pump (or Wavebox) is positioned on the opposite side of the aquarium, the inverse operation must be activated on the controller. To do this, hold down “Pulse Duration” on the FOLLOWER for 2 seconds. To switch back to synchronous operation, keep the button pressed again. The LEADER transmits pulses and, if necessary, ramps. The actual min. and max power must be set on the FOLLOWER. To do this, proceed as explained in the basic functions.

Arrangement examples in aquariums
This new type of highly compact circulation pump for aquariums from 20 to 500 liters (5 to 132 USgal.) can be easily concealed behind decorative objects, and therefore facilitate the harmonious overall appearance of a small aquarium, which makes it absolutely perfect for aqua-scaping.
Nano aquariums up to 30L (8 USgal.)

The pump can be easily positioned behind any kind of small decorative item and therefore completely disappear from the aquarium scenery. The flow deflector can hereby be turned to the left or right to create a circular current.
Nano aquariums up to 100L (26 USgal.)

The pump can be concealed behind decorative items in the same manner in larger aquariums. For a wider flow, the flow deflector 3163.770 can be omitted.
Aquariums up to 500L (132 USgal.)

Here, two or four pumps can be used for a high/low tide simulation. With the Turbelle® 6020 this can be performed in a 6-hour cycle using a timer, and with a Turbelle® Controller 7020 via the cloud for the 6040.

Waves in aquariums
Oscillating current
The Turbelle® nanostream® 6040 electronic together with its controller can create a very interesting oscillating current in Nano aquariums up to approx. 150 liters (40 USgal.). For this, we recommend positioning the pump with the water outlet facing upwards (1) without the flow deflector.

For the wave setting, please observe the information for the commissioning / setting.
Surface waves
Together with the controller, the Turbelle® nanostream® 6040 electronic can create small surface waves in larger aquariums, which will improve the shimmer effect down to the bottom of the aquarium and oxygen exchange within the biotope. For this, position the pump approx. 50 to 100mm (2 to 4 in.) below the water surface, with the water outlet facing upwards (2) and without a flow deflector.

For the wave setting, please observe the information for the commissioning / setting. The preset frequency should be very short for this function.

Cable Guard 6040.019
The cable guard feature ensures that the power cable is protected and prevents it from being damaged or entangled with other objects in the aquarium. The Cable guard 6040.019 (1) protects the cable of all Turbelle® pumps against damage from aquarium inhabitants, such as some coral-eating fish (e.g. triggerfish) or sea urchins, which eat algae growing on the cable surface. Therefore, we recommend placing the cable as far as possible in such a way that it is exposed to as little light as possible to avoid algae growth.

Cable protection by the Cable guard 6040.019 is limited in time, since by gnawing off algae, collaterally small particles of the plastic surface will be removed. For that reason, the cable guard should be checked regularly and it should even be replaced if the cable protection can no longer be assured by it.
Caution: If the Cable guard is not in use to protect a Turbelle® pump or not replaced in time with the result of cable damage by animals, this will lead to a warranty exclusion!

Other power supply units for 6040 – Safety Connector

Turbelle® nanostream® 6040 is a pump with an electronically controlled motor. The pump can therefore be operated with batteries or rechargeable batteries. For a safe connection of the pump, we recommend the Turbelle® safety connector 6105.500. The safety connector permits normal operation with the TUNZE® power supply unit (2), but in case of a power failure it will automatically switch over to a battery (3). Always ensure a correct charge condition of the battery by using a commercially available charger. Indoor use of lead starter batteries for cars is inadmissible!
Never connect the Turbelle® nanostream® 6040 to a battery or a direct-current source directly and without fuse.
The maximum DC voltage is 14 volts (switch-off limit)!

Safety Connector
The safety connector provides additional protection against electrical hazards and ensures a secure connection between the pump and the power supply.

Servicing **

**

To ensure the optimal performance of the Aquatic Eco Engineering 6020 / 6040, regular servicing and maintenance are recommended. Refer to the user manual for detailed instructions on cleaning and maintenance procedures.  The Turbelle® nanostream® 6020 and 6040 are particularly low-maintenance devices thanks to the „Self-Cleaning-System“ principle. However, we recommend a thorough cleaning every two years. Under unfavorable conditions, for example, water with a high lime content, excessive sludge formation or failures, shorter intervals will become necessary.
Remove the discharge ring from the pump 6020 (1).

Pull out the drive unit (2).

Clean all parts, including the intake surface, pump housing, drive unit with impeller and the rotor chamber. Never remove soiling with hard objects! Only use brushes and mild detergents or vinegar! If the drive unit becomes too loose and has too much clearance, renew the part completely. The assembly is carried out correspondingly in the reverse order.

Warranty **

**

The Aquatic Eco Engineering 6020 / 6040 comes with a warranty. Please refer to the warranty terms and conditions provided by the manufacturer for more information. The unit manufactured by TUNZE® Aquarientechnik GmbH carries a limited guarantee for a period of sixty (60) months after the date of purchase covering all defects in material and workmanship. Within the framework of the corresponding laws, your remedies in case of a violation of the guarantee obligation shall be limited to returning the unit manufactured by TUNZE® Aquarientechnik GmbH for repair or replacement at the discretion of the manufacturer. Within the framework of the corresponding laws, the said shall be the only remedies. Consequential damage and/or other damage shall be excluded therefrom explicitly. Defect units shall have to be shipped to the dealer or the manufacturer in the original packaging together with the sales slip in a pre-paid consignment. Unpaid consignments will not be accepted by the manufacturer. Wear parts such as pump drives or bearing washers include a limited warranty period of two years. Exclusion from guarantee shall exist also in case of damage caused by inexpert handling (such as water damage), technical modification carried out by the buyer or by connection to devices which have not been recommended. Subject to technical modifications, especially those which further safety and technical progress. Customers in USA, please refer to seperate Limited Warranty for United States brochure.

As used in this limited warranty:

1. the term “product” means the TUNZE® product you purchased that accompanies this document,
2. the term “TUNZE®” means TUNZE® Aquarientechnik GmbH,
3. the terms “purchaser” and “you” means the person or entity who originally purchased the product,
4. the term “date of purchase” means the date payment was provided by purchaser for the product, and
5. the term “seller” means the person or entity from whom you purchased the product.

TUNZE® warrants that this unit will be free from defects in material and workmanship for a period of 24 months from the date of purchase. During the applicable warranty period, provided the product is returned in accordance with the terms of this limited warranty, TUNZE® will repair or replace the product, without charge to purchaser, or, at TUNZE®’s sole and exclusive option, refund the purchase price. TUNZE® may, at TUNZE®’s sole and exclusive option, use rebuilt, reconditioned, or new parts or components when repairing any Product, or may replace product with a rebuilt, reconditioned or new product. All repaired / replaced products will be warranted for a period equal to the remainder of the original limited warranty on the original product. All replaced products, parts, components, and equipment shall become the property of TUNZE®. This limited warranty is extended to the original purchaser only and is not transferable or assignable to any other person or entity.

To obtain service under this limited warranty, purchaser must first contact TUNZE® United States distributor, TUNZE® USA, LLC via:
email: tunze@sbcglobal.net,
telephone: 512-833-7546 or
U.S. Mail: 2121 Cole Springs Rd, Buda TX 78610, USA
to arrange for return of the product, shipment of a replacement part, or to receive further instructions. TUNZE® or its distributor may require proof of the purchase and date of purchase by the sales receipt or comparable proof of sale showing the original date of purchase, the serial number of the product and the seller‘s name and address. If TUNZE® determines that any product is not covered by this limited warranty, the purchaser must pay all parts, shipping, and labor charges for the repair or return of such a product. This limited warranty is conditioned upon proper use of the product by the purchaser.

This limited warranty does not cover:

• defects or damage resulting from accident, misuse, abnormal use, abnormal conditions, improper storage, sand or dirt, neglect, or unusual physical, electrical or electromechanical stress;
• scratches, dents and cosmetic damage, unless caused by TUNZE®;
• defects or damage resulting from excessive force or use of a metallic object when conducting maintenance;
• ordinary wear and tear;
• defects or damage resulting from the use of the product in conjunction or connection with accessories, products, or ancillary / peripheral equipment not furnished or approved by TUNZE®;
• defects or damage resulting from improper testing, operation, maintenance, installation, service, or adjustment not approved by TUNZE®;
• defects or damage resulting from external causes such as collision with an object, fire, dirt, windstorm, lightning, earthquake, exposure to weather conditions, theft, blown fuse, or improper use of any electrical source; or
• damage caused by aquarium inhabitants, including, but not limited to, fishes, corals, anemones, echinoderms, crustaceans, or any other aquatic plant or animal, sessile or motile, vertebrate or invertebrate, marine, brackish or freshwater.

OTHER THAN THE LIMITED EXPRESS WARRANTY SET FORTH ABOVE, THERE IS NO OTHER WARRANTY, REPRESENTATION OR CONDITION OF ANY KIND; AND ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS HEREBY EXCLUDED AND DISCLAIMED INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE.
Some states do not allow limitations of implied warranties, so the above limitation may not apply to you.
IT IS UNDERSTOOD AND AGREED THAT TUNZE®’S LIABILITY, AND PURCHASER’S SOLE REMEDY, WHETHER IN CONTRACT, UNDER ANY WARRANTY, IN TORT (INCLUDING NEGLIGENCE), IN STRICT LIABILITY, OR OTHERWISE, SHALL NOT EXCEED THE RETURN OF THE AMOUNT OF THE PURCHASE PRICE PAID BY PURCHASER, AND UNDER NO CIRCUMSTANCES SHALL TUNZE® BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, PERSONAL INJURY, PROPERTY DAMAGE, DAMAGE TO OR LOSS OF EQUIPMENT, LOST PROFITS OR REVENUE, COSTS OF RENTING REPLACEMENTS AND OTHER ADDITIONAL EXPENSES, EVEN IF TUNZE® HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE PRICE STATED FOR THE PRODUCT IS A CONSIDERATION IN LIMITING TUNZE®’S LIABILITY AND PURCHASER’S REMEDY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusion may not apply to you.
TUNZE® WILL NOT BE LIABLE FOR ANY DAMAGES, LOSSES OR EXPENSES AS A RESULT OF PURCHASER’S NEGLIGENCE, WHETHER DEEMED ACTIVE OR PASSIVE, AND WHETHER OR NOT ANY SUCH NEGLIGENCE IS THE SOLE CAUSE OF ANY SUCH DAMAGE, LOSS OR EXPENSE.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS, REPRESENTATIONS OR WARRANTIES, EXPRESS OF IMPLIED (INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), NOT SPECIFIED HEREIN, RESPECTING THIS PRODUCT. THIS DOCUMENT STATES THE ENTIRE OBLIGATION OF TUNZE® AQUARIENTECHNIK GMBH AND TUNZE USA, LLC IN CONNECTION WITH THE SALE OF THIS UNIT TO THE ORIGINAL PURCHASER, OR TO ANY SUBSEQUENT PURCHASER.

Disposal
When disposing of the pump, follow the proper disposal methods and regulations in your locality. Do not dispose of it with regular household waste.
(in keeping with RL2002/96/EU)
The device and the battery may not be disposed of in normal domestic waste; it has to be disposed of in an expert manner.
Important for Europe: Devices can be disposed of through your community’s disposal area.

FAQ

1. Q: Can the Aquatic Eco Engineering 6020 / 6040 be used in swimming pools?
   A: No, the pump is not suitable for use in swimming pools.

2. Q: Can children use the Aquatic Eco Engineering 6020 / 6040?
   A: The pump is not intended for play by children. However, children aged 8 years and older can use it under adult supervision and after receiving proper instructions on its safe use.

3. Q: Can I repair a damaged mains cable?
   A: No, a damaged mains cable should be replaced instead of being repaired.

TUNZE® USA LLC
2121 Cole Springs Rd
Buda TX 78610

• Phone 001 512-833-7546
• Fax 001 512-832-6082
• Email: tunze@sbcglobal.net
• Website: www.tunze.com

References

• TUNZE Hub

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>