GROHE G23558002 Start Bath Mixer Instruction Manual
- June 12, 2024
- GROHE
Table of Contents
GROHE G23558002 Start Bath Mixer
Product Information
This product is a built-in shower mixer with inlet sets and pop-up overflows. It is designed and engineered by GROHE in Germany. When installing this product, please note that a safety device must be installed to prevent drinking water contamination due to backflow. The applicable installation codes in each country must be observed.
Product Usage Instructions
- Ensure that the necessary inlet sets and pop-up overflows are properly installed.
- Refer to the installation codes in your country for guidance on the installation process.
- Make sure to install the safety device to prevent backflow and drinking water contamination.
- Follow the specific guidelines for setting up the product according to the requirements in your country.
- Use a 2.5mm screwdriver to adjust any necessary settings.
- Refer to the user manual for information on the minimum and maximum settings.
- For additional adjustments, use a 17mm wrench or tool.
- Use a 3mm screwdriver for certain adjustments as indicated in the manual.
- During installation, ensure that the product is securely mounted using appropriate tools and techniques.
- If you have any questions or need further assistance, refer to the GROHE website for contact information.
Parts
TOOLS
INSTALLATION INSTRUCTION
MAINTAINCE
- When installing built-in shower mixers with inlet sets and pop-up overflows, please note that a safety device to prevent drinking water contamination due to backflow must be installed. The applicable installation codes in each country must be observed.
- (6) +44 208 283 2840
- info-uk@grohe.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>