TUNZE 6205.500 Magnet Holder Instruction Manual
- June 4, 2024
- TUNZE
Table of Contents
TUNZE 6205.500 Magnet Holder
General aspects
TUNZE® Magnet Holder 6025.500 (1), 6065.520 (2) and 6205.500 (2) (patent No. 20 2005 003 170) are usually employed to attach Turbelle® pumps, but they can also be used as universal holders. They have a very strong holding power and can be attached to every aquarium pane. Magnet Holder consist of two magnetic halves in a waterproof housing. The inside unit is placed in the water and the external unit is attached to the outside of the aquarium; both parts are identical in shape. On account of their encapsulated construction, Magnet Holder are resistant to corrosion, and cause no harmful effects for the aquarium biotope.
Magnet Holder 6025.500 (1):
Dimensions: diam. 50 mm (1.9 in.); W 15 mm (.59 in.) / diam. 50 mm (1.9 in.);
W 20 mm (.78 in.).
Magnet Holder 6065.520, 6205.500 (2/3):
Supplied with two cable fasteners and 100 mm (3.9 in.) of hook-and-loop strip
suitable especially for installation in water. Dimensions: diam. 70 mm (2.7
in.) x W 20 mm (.78 in.). The Magnet Holders are only designed for use in
filled aquariums. If the devices are mounted while the tank is not filled with
water, the holding force might be too low.
Safety instructions for magnet holder
-
Very strong magnet! (1)
Keep the magnet holder out of reach of children! -
Caution! Danger of injury! (2)
-
Do not bring upper and lower magnet part together directly! Depending on the type, the parts of the magnet cling together on direct contact with about 30 to 200 kg (66 to 441 lbs.).
-
Get hold of the magnet parts at the sides only; never get your hand or fingers between the contract surfaces (3)!
-
Attracts metal parts and other magnets with a large force at a distance of below 10 cm (3.9 in.) ! When handling the magnet, no metal parts, other magnets, blades or knives should be located closer than 10 cm (3.9 in.) in order to avoid injuries.
-
Exercise caution in case of magnetically sensitive objects, such as pacemakers, data carriers, credit cards and keys – keep a distance of at least 30 cm (11.8 in.)!
-
Always use the piece of polystyrene supplied when transporting the Magnet Holder. (4) Heat of more than 50° Celsius (122° F) will lead to the destruction of the magnet or the loss of the magnetic action (4).
Attaching self-adhesive elastic buffers on the two parts of the Magnet
Holder
Caution! Prepare magnets separately and place them far away from each
other, as otherwise there is a danger of injury.
Remove the elastic buffers from the film (1) and press them on to the spot
provided for this purpose (2). Use four buffers for each part of the magnet.
As shown in the illustration (3), the adhesion points are in the round
cavities provided for the purpose.
Warranty
The unit manufactured by TUNZE® Aquarientechnik GmbH carries a limited guarantee for a period of sixty (60) months after the date of purchase covering all defects in material and workmanship. Within the framework of the corresponding laws, your remedies in case of a violation of the guarantee obligation shall be limited to returning the unit manufactured by TUNZE® Aquarientechnik GmbH for repair or replacement at the discretion of the manufacturer. Within the framework of the corresponding laws, the said shall be the only remedies. Consequential damage and/or other damage shall be excluded therefrom explicitly. Defect units shall have to be shipped to the dealer or the manufacturer in the original packaging together with the sales slip in a pre-paid consignment. Unpaid consignments will not be accepted by the manufacturer. Exclusion from guarantee shall exist also in case of damage caused by inexpert handling (such as water damage), technical modification carried out by the buyer or by connection to devices that have not been recommended. Subject to technical modifications, especially those which further safety and technical progress. Customers in USA, please refer to separate Limited Warranty for United States brochure.
Attachment
- Attachment with hook-and-loop strip,
- Attachment with screws,
- Attachment with cable fasteners,
- Attachment of pump up to a 20 mm (.8 in.) aquarium pane with 6025.500,
- Attachment of pump up to a 20 mm (.8 in.) aquarium pane with 6065.520 and up to a 27 mm (1.06 in.) aquarium pane with 6205.500.
TUNZE® Aquarientechnik GmbH Seeshaupter Straße 68
82377 Penzberg – Germany Tel: +49 8856 2022
Fax: +49 8856 2021
info@tunze.com
www.tunze.com