PVM9005EJ Profile 2.1 Cu. Ft Over the Range Sensor Microwave Oven Instructions
- June 16, 2024
- GE
Table of Contents
PVM9005EJ Profile 2.1 Cu. Ft Over the Range Sensor Microwave Oven
Product Information
- Product Name: GE ProfileTM Series 2.1 cu. ft. Over-the-Range Sensor Microwave Oven
- Model: PVM9005SJ/EJ/BL/FM
- Dimensions (in inches):
- Width: 29-13/16 (without obstruction)
- Height: 16-9/16 (rear), 15-11/16 (front
- Depth: 15-9/16
- Electrical Requirements: Requires a 120V grounded outlet
- Ventilation Options: Designed for adaptation to three types of ventilation
Installation Instructions
Before installing the microwave oven, please read the following important
information:
- An electrical receptacle must be located in the cabinet above the microwave oven.
- No additional wiring, venting, or cabinet rebuilding is necessary in many cases.
- Ensure a minimum distance of 2 inches from the bottom of the microwave oven to the top of the range blackguard for easy removal of light covers.
- The minimum distance from the door hinge side to an adjacent wall should be 3/4 inch.
For detailed installation instructions and full-size templates, refer to the installation instructions packed with the Space maker microwave oven.
Ventilation Options:
The microwave oven is designed for adaptation to the following three types
of ventilation:
- Hood Exhaust Duct: Outside ventilation requires a Hood Exhaust Duct. Ensure proper sizing and use a rectangular-to-round transition adapter if a round duct is required. Do not use less than a 6-inch diameter duct.
- Rear Exhaust: If a rear or horizontal exhaust is to be used, align the exhaust with the space between studs or prepare the wall during construction to accommodate the exhaust.
Maximum Duct Length: The total duct length of a 3-1/4 x 10 rectangular or 6-inch diameter round duct should not exceed 140 equivalent feet for satisfactory air movement. Elbows, transitions, wall and roof caps, etc., add additional resistance to airflow. When calculating the total duct length, include the equivalent length of all transitions and adaptors, as well as the lengths of all straight duct sections. The chart below shows the approximate feet of equivalent length for some typical ducts:
| Duct | Equivalent Feet |
|---|---|
| Rectangular-to-Round Transition Adaptor | 5 ft. |
| Rectangular Duct | 40 ft. |
| Round Duct | 10 ft. |
| Straight Duct Section | 5 ft. |
| Transition or Adaptor | 25 ft. |
| Wall Cap | 5 ft. |
| Roof Cap | 24 ft. |
FAQ
-
Q: What electrical requirements does the microwave oven have?
A: The microwave oven requires a 120V grounded outlet. -
Q: Do I need to do any additional wiring or cabinet rebuilding for installation?
A: No, in many cases, no additional wiring, venting, or cabinet rebuilding is necessary. -
Q: How much space should I allow between the bottom of the microwave oven and the top of the range backguard?
A: Allow a minimum of 2 inches for easy removal of light covers. -
Q: What is the minimum distance required from the door hinge side to an adjacent wall?
A: The minimum distance should be 3/4 inch. -
Q: What are the ventilation options for the microwave oven?
A: The microwave oven is designed for adaptation to three types of ventilation: Hood Exhaust Duct, Rear Exhaust, and Horizontal Exhaust.
PVM9005SJ/EJ/BL/FM GE Profile™ Series 2.1 cu. ft. Over-the-Range Sensor Microwave Oven
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
- NOTE: Requires 120V grounded outlet. Electrical receptacle must be located in cabinet above microwave oven. No additional wiring, venting or cabinet rebuilding necessary in many cases. Complete detailed, easy-to-follow installation instructions and convenient full-size templates are packed with the Spacemaker microwave oven.
- IMPORTANT INFORMATION: When installing the microwave oven over a range, allow minimum of 2″ from bottom of microwave oven to top of range backguard to allow for removal of light covers.
- VENTILATION OPTIONS: The microwave ovens are designed for adaptation to the following three types of ventilation:
- Outside exhaust (vertical – as shown)
- Outside exhaust (horizontal)
- Recirculating (non-vented ductless – see Filter Kit drawing)
- INSTALLATION INFORMATION: This information is not intended to be used for installing unit described. Before installing, consult installation instructions packed with product/kit for current dimensional data.
For answers to your
Monogram, Café™, GE Profile™ or GE Appliances product questions, visit our
website at geappliances.com or call GE Answer
Center® Service, 800.626.2000.
Specification Revised 12/23
- HOOD EXHAUST DUCT: Outside ventilation requires a HOOD
- EXHAUST DUCT. Read the following carefully.
- EXHAUST CONNECTION: The hood exhaust has been designed to mate with a standard 3-1/4″ x 10″ rectangular duct. If a round duct is required, a rectangular-to-round transition adaptor must be used. Do not use less than a 6″ diameter duct.
- REAR EXHAUST: If a rear or horizontal exhaust is to be used, care should be taken to align exhaust with space between studs, or wall should be prepared at the time it is constructed by leaving enough space between the wall studs to accommodate exhaust.
- MAXIMUM DUCT LENGTH: For satisfactory air movement, the total duct length of 3-1/4″ x 10″ rectangular or 6″ diameter round duct should not exceed 140 equivalent feet.
- ELBOWS,TRANSITIONS,WALLANDROOF CAPS, etc., present additional resistance to airflow and are equivalent to a section of straight duct which is longer than their actual physical size. When calculating the total duct length, add the equivalent length of all transitions and adaptors plus the lengths of all straight duct sections.
- The chart below shows the approximate feet of equivalent length of some typical ducts.
| DUCT | EQUIVALENT FEET |
|---|---|
| A. Rectangular-to-Round Transition Adaptor | 5 ft. |
| B. Wall Cap | 40 ft. |
| C. 90° Elbow | 10 ft. |
| D. 45° Elbow | 5 ft. |
| E. 90° Elbow | 25 ft. |
| F. 45° Elbow | 5 ft. |
| G. Roof Cap | 24 ft. |
For answers to your Monogram, Café™, GE Profile™ or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000
FEATURES AND BENEFITS
- 2.1 cu. ft. capacity – 1050 Watts (IEC-705 test procedure)
- Chef Connect – Three options with a single touch. For instant convenience, choose when to automatically sync clocks and the range burners with the microwave’s surface light and vent
- Bottom control with integrated handle – Enjoy a sleek appearance that makes cleaning easy
- Upfront charcoal filter with indicator light – Light indicates when odor-removing charcoal filter needs to be replaced
- Four-speed, 400-CFM venting system – Removes smoke, steam and odors
- 10 power levels – Multiple power levels over cooking flexibility
- “Add 30 seconds” button – Add 30 seconds of microwave cooking time
- Turntable On/O– Controls turntable operation
- Sensor cooking controls – Automatically adjusts time and power
- Model PVM9005SJSS – Stainless steel
- Model PVM9005BLTS – Black Stainless
- Model PVM9005FMDS – Black Slate
- Model PVM9005EJES – Slate
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>