VIVO STAND-TV02PW Mobile Portrait to Landscape TV Cart Instruction Manual
- June 16, 2024
- Vivo
Table of Contents
Mobile Portrait to Landscape TV Cart
Instruction Manual
STAND-TV02PW Mobile Portrait to Landscape TV Cart
SKU: STAND-TV02PB/PW
https://vivo-us.com/products/stand-tv02pb
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product. https://vivo-us.com/products
/stand-tv02pb
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| help@vivo-us.com
---|---
| www.vivo-us.com
Chat live with an agent!
| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
Press the lock on each Caster (B) to the down (locked) position, then install
the Casters to the Base (A).
Adjust to sit flat if needed, then tighten each caster using the 10mm Wrench
(T-B).
STEP 2
Slide the Base Poles (C) into the Base (A), making sure the cable holes are
facing towards the back, then secure the Poles using M8x20mm Screws (S-A).
Turn the bolts using the 5mm Allen Wrench (T-D), but do not yet tighten.
STEP 3
Slide the Shelf Mounting Brackets (F) onto the base poles. Insert the Upper
Poles (D) into the Base Poles, making sure the cable holes are facing in
towards the center, then secure the poles using M6x8mm Screws (S-B). Tighten
with the 4mm Allen wrench (T-C).
STEP 4
Slide the Shelf Mounting Brackets (F) up to cover the installed scrws, then
insert M6x12mm Screws (S-C) to secure the brackets. Tighten with a Phillips
screwdriver.
STEP 5
- Install Front Cover (G) between poles, making sure the face of the cover is facing towards the front, and secure using M6x12mm Screws (S-C). Tighten with a Phillips screwdriver.
- Place Equipment Shelf (E) on the Shelf Mounting Brackets, making sure the large end faces towards the back.
- Secure the shelf using M6x12mm Screws (S-C) and tighten with a Phillips screwdriver.
- Tighten the previously installed M8x20mm Screws (S-A) under the base using the 5mm Allen Wrench (T-D).
STEP 6
OPTION A: VESA 200x200mm – 400x400mm Install the Mounting Plate (H) to the
TV. For flat back TVs, use shorter screws (M-A, M-B) with M8 Washers (M-E).
For curved or recessed back
TVs, use longer screws (M-C, M-D) with M8 Washers (M-E) and Spacers (M-F, M-G)
as needed.
OPTION B: VESA 600x200mm – 600x400mm
Attach VESA Extensions (J, K) to the Mounting Plate (H) using M8x8mm Screws
(S-E), and tighten with the 5mm Allen Wrench (T-D). Install the assembled
mounting plate to the TV. For flat back TVs, use shorter Screws (M-A, M-B)
with M8 Washers (M-E). For curved or recessed back TVs, use longer Screws
(M-C, M-D) with M8 Washers (M-E) and Spacers (M-F, M-G) as needed.
STEP 7
Partially insert M8x20mm Screws (S-A) into the top hole on each upper pole,
leaving 10mm (about 3/8”) of thread exposed. Hang the slots of the mounting
plate with TV over the bolts.
STEP 8
Insert M8x20mm Screws (S-A) into either the front or rear lower holes of the
mounting plate. Tighten all screws with the 5mm Allen Wrench (T-D).
STEP 9
To adjust the ease of rotation, loosen or tighten the nuts on the back of the
mounting plate using 6mm Wrench (T-A).
STEP 10
To lock the position, insert the M6x18mm Screw (S-D) into the back of the
mounting plate using a Phillips screwdriver. Use the side hole for portrait,
or the top hole for landscape.
STEP 11
Route cables through the cable holes in the poles and the openings in the
front cover and mounting plate. Stick adhesive Cable Tie Holder (M) onto the
back of the mounting plate in the positions shown. Pull excess cable up into
the mounting plate area, making sure there’s enough slack for free rotation of
the TV if needed, and secure to the tie holders on the side using Cable Ties
(N).
Place a power strip in the back of the mounting plate, and secure using Cable Ties (N).
STEP 12
Install Cable Covers (L) to the cables holes in the poles, using pliers to
break out sections for x2 or x3 cables if needed.
STEP 13
Place the Rear Cover (I) onto the back of the mounting plate and secure using
M6x12mm Screws (S-C). Tighten with a Phillips screwdriver. Unlock the casters
to freely roll the assembled cart.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 11/20/2023
REV1
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT:www.vivo- us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>