TOOLCRAFT 2899835 Reflective Safety Vest Instruction Manual

TOOLCRAFT 2899835 Reflective Safety Vest

Product Information

Specifications

• Product: Neon Yellow Safety Vest
• Item No.: 2899835 (Adult Size)

Product Usage Instructions

Latest Product Information
Download the latest product information from www.conrad.com/downloads or scan the QR code provided. Follow the instructions on the website.

Delivery Conten

• Safety vest
• Operating instructions

Explanation of Symbols

• Care label: Indicates care instructions for the safety vest.
• Fluorescent fabric: Fabric that enhances visibility in low-light conditions.
• Retroreflective material: Material that reflects light back to its source for increased visibility.

Storage
Store the safety vest in its original packaging in a cool, dry place, away from dust, light, and heat sources.

Care and Cleaning
The care label states a maximum of 25 cleaning cycles (Max 25x). However, the lifetime of the garment also depends on usage, care, exposure to ultraviolet rays, hot weather, and storage conditions.

Carefully follow the instructions on the garment identification (care label) to extend the life of the reflective tape and outer material.

• Do not bleach.
• Do not tumble dry.
• Do not iron.
• Do not dry clean.

Safety Instructions
Read the operating instructions carefully and pay attention to the safety information provided. Failure to follow the safety instructions and proper handling may result in personal injury or damage to property, voiding the warranty/guarantee.

• The safety vest is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around as it can become dangerous playing material for children.
• The safety vest is NOT suitable for protection against heat, fire, chemical risks, cold, electrical risks, and/or any uses not mentioned in EN ISO 20471:2013.
• Ensure that the safety vest is in the correct size, properly fitted and closed, and in good condition to meet the specified safety features.
• Before use, inspect the safety vest for cleanliness, rips, unsewn hems, or any changes that may affect its features. Replace the safety vest if irreparable damage occurs.
• Wear the safety vest properly, ensuring it is the right size and kept closed on the front and sides to ensure visibility from 360 degrees.

FAQ

• Q: Where can I download the latest product information?
  A: You can download the latest product information from www.conrad.com/downloads or scan the provided QR code.

• Q: Can I use the safety vest for protection against heat or fire?
  A: No, the safety vest is not suitable for protection against heat, fire, chemical risks, cold, electrical risks, and/or any uses not mentioned in EN ISO 20471:2013.

• Q: How should I store the safety vest?
  A: Store the safety vest in its original packaging in a cool, dry place, away from dust, light, and heat sources.

• Q: How many cleaning cycles are recommended for the safety vest?
  A: The care label states a maximum of 25 cleaning cycles (Max 25x), but the lifetime of the garment also depends on usage, care, exposure to ultraviolet rays, hot weather, and storage conditions.

• Q: What should I do if the safety vest gets damaged?
  A: If irreparable damage occurs to the safety vest, it should be replaced.

Operating Instructions

Neon Yellow Safety Vest
Item No. 2899835 (Adult Size)

Latest product information

Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Intended Use
This product is a high visibility safety vest, and should be worn anywhere high visibility clothing is required. It is designed to make the wearer visible in inclement weather and discernible against the surrounding environment. It increases visibility during the day (by use of fluorescent material) and when lights are used in the dark (through retroreflective material).
Places where an individual should be highly visible include motorways, railways, airports, docks, construction sites etc. They can also be worn by school children, cyclists and motorcyclists during non-professional or leisure activities.
For safety and approval purposes, you must not modify this product. If you use the product for purposes other than those described above, the product may be dam-aged. In addition, improper use can result in other hazards. Read the instructions carefully and store them in a safe place. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and product names are trademarks of their respective owners. All rights reserved.

Delivery Content

• Safety vest
• Operating instructions

Explanation of Symbols

The symbol warns of hazards that can lead to personal injury.

Safety Instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• NOT suitable for protection against heat, fire, chemical risks, cold, electrical risks and/or for all uses not mentioned in EN ISO 20471:2013.
• The specified safety features will only be met if this safety vest is in the correct size, is properly fitted and closed, and is in good condition.
• Before use, ensure that this safety vest is clean, with no rips, unsewn hems or other changes that may affect its features. If irreparable damage occurs, replace the safety vest.
• Safety vest should be worn properly, should be the right size for the person wearing it, and should be kept closed on the front and sides to ensure visibility from 360 degrees.
• Safety vest should be kept in good, clean condition and replaced when factors as to preclude their function as high visibility clothing are present. See section “Care and Cleaning” for further information.
• If you have questions which remain unanswered by these operating instructions, contact our technical support service or other technical personnel.

Overview

1. Care label
2. Fluorescent fabric
3. Retroreflective material

Storage

Store the safety vest in its original packaging in a cool, dry place, away from dust , light and heat sources.

Care and Cleaning

The care label states a maximum 25 cleaning cycles “Max 25x”. This is not the only factor related to the lifetime of the garment.
The lifetime will also depend on usage, care, exposure to ultra violet rays from the sun, hot weather, storage conditions etc.

Carefully follow the instructions on the garment identification (care label) to extend the life of reflective tape and outer material.

Declaration of Conformity (DOC)

High-visibility warning clothing complies with the requirements of the regulation EU 2016/425 by means of the European Standard EN ISO 20471:2013+A1:2016 “high-visibility warning clothing” — Specifications”.EU – Type certification issued by: TÜV Rheinland LGA products GmbH (notified body: 0197) – Tillystraße 2 – 90431 nürnberg.

Click on the following link to read the full text of the EU declaration of conform-ity: www.conrad.com/downloads

Enter the product item number in the search box. You can then download the EU declaration of conformity in the available languages.

Disposal
At the end of its service life, dispose of the product in accordance with applicable regulatory guidelines. You thus fulfill your statutory obligations and contribute to the protection of the environment.

Technical Data

• Outer material……………………. 100% Polyester
• Colour……………………………….. Fluorescent yellow
• Size of person……………………. 118 – 126 cm (chest)
• 182 – 188 cm (height)
• Weight………………………………. 145 g

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing. Copyright 2023 by Conrad Electronic SE.
*2899835_V1_1023_02_jh_mh_en

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>