OMCAN FW-CN-1800 Countertop Steamer Instruction Manual

June 14, 2024
OMCAN

OMCAN FW-CN-1800 Countertop Steamer

OMCAN-FW-CN-1800-Countertop-Steamer-product

Product Information

Specifications

Model| Capacity| Power| Current| Pre-Heat Time| Water Reservoir Capacity| Water Reservoir Dimensions| Electrical Dimensions| Packaging Dimensions| Weight| Packaging Weight| Item Number
---|---|---|---|---|---|---|---|---|---|---|---
FW-CN-1800| Half-Size Pan| 1800 W| 15A| 25 Minutes| 2.8 L / 3 QT| 8.3 x 4.3 x 3.7 / 210 x 110 x 94mm| 120V / 60Hz / 1| 17.6 x 16.4 x 8.8 / 448 x 416 x 223mm| 19.9 x 18 x 10.4 / 505 x 457 x 265mm| 36.8 lbs. / 17 kgs.| 41.9 lbs. / 19 kgs.| 44407

General Information

  • Before operating any equipment, always read and familiarize yourself with all operation and safety instructions.

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety instructions. Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the equipment if servicing or returning of the machine is required.

Safety and Warranty

WARNINGS

  • DO NOT TOUCH ANY HOT SURFACES.
  • Plug only into a 3-hole grounded electrical outlet.
  • Do not immerse unit, cord or plug in liquid at any time.
  • Unplug cord from outlet when not in use and before cleaning.
  • Do not operate unattended.
  • Do not use this unit for anything other than intended use.
  • Do not use outdoors.
  • Always use on a firm, dry and level surface.
  • DO NOT USE IF UNIT HAS A DAMAGED CORD OR PLUG, IN THE EVENT THE APPLIANCE MALFUNCTIONS, OR HAS BEEN DAMAGED IN ANY MANNER.
  • Keep children and animals away from unit.
  • Any incorrect installation, alterations, adjustments and/or improper maintenance can lead to property loss and injury. All repairs should be done by authorized professionals only.
  • Ensure that the designated power supply is adequate for continual usage and the voltage is correct

RESIDENTIAL USERS

Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

  • Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the equipment.
  • Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use.
  • Please see https://omcan.com/disclaimer for complete info.

WARNING

  • The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty.
  • In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.
  • DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: https://omcan.com/warranty-registration/

For mailing in Canada

  • OMCAN
  • PRODUCT WARRANTY REGISTRATION
  • 3115 Pepper Mill Court, Mississauga, Ontario Canada, L5L 4X5

For mailing in the US

  • OMCAN
  • PRODUCT WARRANTY REGISTRATION
  • 4450 Witmer Industrial Estates, Unit 4, Niagara Falls, New York USA, 14305

or email to: service@omcan.com

Purchaser’s Information

OMCAN-FW-CN-1800-Countertop-Steamer-fig-3

Technical Specifications

Model FW-CN- 1800
Capacity Half-Size Pan
Power 1800 W
Current 15A
Pre-Heat Time 25 Minutes
Water Reservoir Capacity 2.8 L / 3 QT
Water Reservoir Dimensions 8.3” x 4.3” x 3.7” / 210 x 110 x 94mm
Electrical 120V / 60Hz / 1
Dimensions 17.6” x 16.4” x 8.8” / 448 x 416 x 223mm
Packaging Dimensions 19.9” x 18” x 10.4” / 505 x 457 x 265mm
Weight 36.8 lbs. / 17 kgs.
Packaging Weight 41.9 lbs. / 19 kgs.
Item Number 44407

Installation And Operation

Installation

  1. Remove all packing materials both inside and outside the unit and place on a flat surface.
  2. Clean machine thoroughly before first use.
  3. Position unit near a power outlet. It is not recommended to use an extension cord for this item.
  4. Do not place in an area where gasoline, paint or flammable liquids are used or stored.
  5. Unit must be used operated with the legs installed.

Operation

  1. Plug the unit into a grounded outlet.
  2. Open the tank cover and make sure that the filter inside the tank is properly installed.
  3. Fill the unit up with approximately 3 quarts of cold tap water (Do not overfill the tank). This unit is designed to be used with cold tap water. Distilled water may be used to reduce calcium/mineral deposit build-up.
  4. Turn the on/off switch to the on position and allow for the unit to preheat for 25 minutes.
  5. Once heated, open the top cover and place food items into the basket(half size perforated food pan included) and then close the top cover.
  6. Press the steam button for 2 seconds and release and wait 20 seconds for the steam to penetrate the items inside the unit. Repeat if product requires more steam. PLEASE NOTE THAT PRESSING AND HOLDING THE STEAM BUTTON FOR LONGER THAN 2 SECONDS AT A TIME WILL OFTEN FLOOD OUT AND RESULT IN POOR STEAMING.
  7. Remove the hot, steamed product from the unit.
  8. Turn unit power switch to off if finished using.

WARNING: THE EXTERIOR OF THE UNIT GETS HOT WHILE IN USE!

Note: In the event of a reset, the reset button is located on the back of the unit. The reset cap is to be removed before the button can be pressed.

Maintenance

CLEANING

NOTE

  • To maintain cleanliness and increase service life, the unit should be cleaned daily.
  • Do not immerse the unit in water or any other liquid. If liquid enters the electrical compartment it may cause a short circuit or electrical shock.

DAILY MAINTENANCE

  • Turn the unit off and disconnect the power cord from the electrical outlet.
  • Allow for unit to cool for 45 minutes before cleaning.
  • Wipe down the unit with a damp cloth or sponge and hot soapy water.
  • Rinse by wiping with a clean damp cloth.
  • Wipe dry.
  • Do not immerse unit in water or other liquid.

MONTHLY MAINTENANCE

  • Turn the unit off and disconnect the power cord from the electrical outlet.
  • Allow for unit to cool for 45 minutes before cleaning.
  • Perform daily maintenance as listed above.
  • Remove the spray tube by lifting the loose end and pulling it out of the generator hole.
  • Slide the metal cover off the spray tube, take a paper clip and poke out all of the tube’s holes.
  • Gently wash the tube under running water to clear the deposits out of the loose end. Re-attach the cover onto the tube. Please do not bend the spray tube. Bending it will cause permanent damage.
  • Use a scraper to remove the excessive calcium/mineral buildup from the generator surface.
  • Thoroughly wipe the generator with a damp cloth to remove any loose buildup and reassemble the unit.

If deposits are still excessive and/or difficult to remove, please refer to the steps below:

  1. Pour de-limer solution onto the generator surface. Follow the de-limer manufacturer’s instruction for proper mixture and use. If using a chemical cleaner, please check to see it is safe to use on the metal. Please follow all precautions and safety warnings on the product label.
  2. Using a sponge or a dry towel, remove the de-limer solution from the generator surface and then rinse the surface with clean water.

PLEASE NOTE: to ensure proper steaming, some calcium/mineral deposits must be present on the generator surface. If during cleaning, the surface does become free of calcium/mineral deposits, add plain tap water to the surface and allow it to boil off. If necessary, repeat this process to create a thin coating of calcium/mineral deposits.

PLEASE NOTE: In soft water areas, it may be necessary to add a small amount of lime to the generator surface to season it. This will ensure proper steaming by producing a thin coating of calcium/mineral deposits on the generator surface.

Seasoning mixture consists of ¾ ounce baking soda, ¾ ounce lime mixed with 1 quart of water. Stir mixture and pour ¼” deep onto the hot generator surface. After mixture is converted to steam, the remaining loose powder can be removed.

  1. Plug the power cord into the outlet.
  2. Turn the power on and allow the unit to warm up for approximately 30 minutes.
  3. Push and release the steam button several times to purge the remaining de-limer residue from the generator surface.
  4. Turn the unit’s power off; re-install all parts and accessories before using again.

WATER TANK FILTER MAINTENANCE

The water tank filter is used to prevent particles or food products from entering and damaging the water pump.
Inspect and clean this filter monthly by following these steps:

  1. Turn the power off, unplug the cord and allow unit to cool down before proceeding.
  2. Open the slide door.
  3. Remove the water tank filter located inside the tank by pulling it upwards and out of the bottom hole.
  4. Clean the filter by running it under tap water. Replace the water tank filter if the screen is torn or damaged.
  5. Re-install the filter stem into the bottom hole of the tank.
  6. Fill the water tank and test the unit.

Parts Breakdown

Model FW-CN-1800 44407

OMCAN-FW-CN-1800-Countertop-Steamer-fig-1

Item No. Description Position
67692 Top Cover for 44407 1
67693 Handle for 44407 2
67694 Steam Plate for 44407 3
67695 1/2 GN Pan for 44407 4
67696 Evaporation Plate for 44407 5
67697 Aluminum Pan (Including Heating Element) for 44407 __

6

67698| Control Panel for 44407| 7
67699| Bottom Plate for 44407| 8
67700| Humidity Control for 44407| 9
67701| Power Switch for 44407| 10
---|---|---
67702| Feet for 44407| 11
67703| Transformer for 44407| 12
67704| Spout Connector for 44407| 13
67705| Relay Fixing Plate for 44407| 14
67706| Right Plate to Fix Water Tank for 44407| __

15

67707| Water Tank Cover Lock for 44407| 16
67708| Power Cord for 44407| 17
67709| Relay for 44407| 18
67710| Temperature Limiter for 44407| 19
---|---|---
67711| Wire Buckle for 44407| 20
67712| Ceramic Terminal for 44407| 21
67713| Pump for 44407| 22
67714| Power Control Board for 44407| 23
67715| Water Pipe Fixture for 44407| 24
AL777| Gasket for 44407| 25

Electrical Schematics

Model FW-CN-1800 44407

OMCAN-FW-CN-1800-Countertop-Steamer-fig-2

Thank you for choosing Omcan.

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 6,500 globally sourced products.

Contact

STOP

  • DO NOT RETURN
  • THIS PRODUCT TO THE STORE

Scan

Documents / Resources

| OMCAN FW-CN-1800 Countertop Steamer [pdf] Instruction Manual
FW-CN-1800 Countertop Steamer, FW-CN-1800, Countertop Steamer, Steamer
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals