Linxdot LD-1002 Hotspot User Guide
- June 5, 2024
- Linxdot
Table of Contents
Linxdot LD-1002 Hotspot
suitable location
Find a suitable location for your Linxdot. We suggest positioning the antenna against the window for better coverage.
Connection
Connect the power supply and the included antenna to your Linxdot but don’t turn it on yet. We suggest using the optional Ethernet port where possible.
Application
Download the Helium Hotspot app.
Activation
Activate your Linxdot.
- Select the Linxdot LoRa Hotspot from the list.
- Agree to diagnostics and power on your Linxdot.
- Scan for your Linxdot and select it once found.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
This device in compliance with the essential requirements and other relevant provisions of UK Radio Equipment Regulations (Si 2017/1206); UK Electrical Equipment (Safety) Regulations (SI 2016/1101); and UK Electromagnetic Compatibility Regulations (SI 2016/1091). All essential radio test suites have been carried out.
- Operation Frequency For BT: 2402MHz-2480MHz
- For WIFI: 2412MHz-2472MHz (802.11b/802.11g/802.11n(HT20))
- For LoRa: 868.1-868.5MHz
- Max Output Power For BT:0.004W For WIFI:0.0297W
- For LoRa:0.0312W
- Manufacturer: Shenzhen Eternity Technology Co., Ltd
- Address: Building A2, YingZhan Industrial Park, LongTian Street, PingShan, ShenZhen, China
- E-mail: Nickchen@szeternity.com
- Importer:FX Technology
- Limited Address:2 Stone Buildings, London Wc2A 3TH, United Kingdom
DECLARATION OF cONFORMITY
I hereby declare that the product
- Product: Linxdot Hotspot
- Model No.: LD-1002
- Trade mark: Linxdot
- Accessories: Adapter
- Information: Model: TPQ-228F12020ovw01
- Input: AC 100-240V, 50/60Hz, 0.8A
- Output: DC 12.0V, 2.0A, 24.0W
- Manufacturer: Shenzhen Tianvin Electronics Co. Ltd.
satisfies all the technical regulations applicable to the product within the scope of UK Radio Equipment Regulations (SI 2017/1206); UK Electrical Equipment (Safety) Regulations (SI 2016/1101); and UK Electromagnetic Compatibility Regulations (SI 2016/1091) and declare that the same application has not been lodged with any other UK Approved Body.
All essential radio test suites have been carried out.
- NOTIFIED BODY: MICOM Labs Inc
- Address: 575 Boulder Court Pleasanton, California 94566 USA
- Identification Number: AB 2280
MANUFACTURER or AUTHORISED REPRESENTATIVE Address.
Shenzhen Eternity 1Technology Co., Ltd LOngll
This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorized
Point of contact:
Nick /18825289159