maxima Electric Cooking Thermal Blender 1.2 L User Manual

maxima Electric Cooking Thermal Blender 1.2 L

BEFORE USING THIS PRODUCT YOU SHOULD READ THIS USER MANUAL PROPERLY

Introduction

• Thank you for purchasing this Maxima product. To ensure optimal and safe use, please read these instructions completely before attempting to install or use this product
• All Maxima products are manufactured with great care and are CE certified. As a result, our products meet the legal requirements within the European
• Union with regard to safety, health and the environment. In addition, our products are tested and inspected prior to shipment to ensure product quality and safety.
• The Maxima Cooking Blender can blend and cook simultaniously and is ideally suited for making soup, warm sauces or porridge. The appliance is low-maintenance, safe and easy to use.
• At Maxima we are very proud of our products and are completely committed to providing you with the best products and service possible. Your satisfaction is our number one priority.
• We trust you will enjoy using this product and Thank You for choosing Maxima Kitchen Equipment as your supplier. We hope you will consider Maxima for your future purchases.

Specifications

Features

| §   Overheat Protection.

§   Lid with Safety Switch.

§   Full Copper Motor.

§   Stainless Steel Blades

§   Operation Presets

§   Glass Jug

§   ABS Body

Accessories

| §   Brush

§   Scraper

§   Measuring Cup

General Safety Regulations

This machine may only be used for the purpose for which it was designed and intended. The manufacturer and supplier are not liable for any damage caused by incorrect operation and improper use.

• This is a commercial product and must only be used by a trained professional who has read and fully understands this manual. It must not be used by children or persons with reduced physical, sensory or mental capabilities.
• The device is to be used indoors only.
• WARNING! Keep the machine and electrical plug away from water and other liquids. If either is exposed to a liquid, immediately disconnect the power supply and have the machine checked by a certified technician. Not following these instructions may cause electric shock, or even death.
• Do not use the machine after it has fallen or is damaged in any other way. Have it checked and repaired by a certified technician.
• Do not move the appliance while operational.
• Never try to move or carry the machine by the power cord.
• Do not place or move the machine on its side, upside-down or tilted (more than 45°).
• ATTENTION! Do not try to repair the machine yourself unless instructed. This may void warranty or cause hazardous situations.
• Do not try to open the casing of the machine unless instructed.
• Do not insert any objects in the casing or openings of the machine.
• Do not use any extra devices or accessories that are not supplied along with the machine.
• Never put your hands or other body parts near the moving parts of the machine while operational.
• Always keep an eye on the machine when in use.
• Keep all packaging away from children.
• Dispose of packaging in accordance with local, state and national regulations.
• Avoid overloading the machine.
• The electrical installation must satisfy the applicable local, state and national regulations.
• Switch off the machine before pulling the power plug out of the socket.
• Always disconnect te power supply when the machine is not in use. To pull the plug out of the socket, always pull on the plug and not on the cable.
• Do not touch the power plug with wet or damp hands.
• Keep the power cable away from operating range and do not cover the cable.
• Make sure the power cable does not come in contact with sharp or hot objects and keep away from open fire.
• ATTENTION! As long as the power plug is in the electrical socket the machine is connected to the electric grid.

Product Specific Safety Regulations

• This machine may only be used for its intended purpose: Mixing and cooking food products.
• Ensure the jug and lid are positioned correctly prior to use.
• Do not operate the blender when the jug is empty.
• Only use the stirring rod when the lid is securely in place.
• Use the designated opening in the lid to add ingredients during operation.
• The blades are sharp, handle with care to prevent injury.

First Time Use

• Unpack and inspect your machine immediately after receipt. If there are any latent defects or damage to the machine then immediately contact your supplier. Save all packaging materials in case the machine needs to be returned or inspected by the freight carrier.
• Remove any protective film from all surfaces (if applicable).
• Read this instruction manual completely before attempting to install and operate this product. When in doubt, contact your supplier.
• If your machine is supplied with a factory fitted molded plug then you may plug the unit into a standard electrical outlet. Make sure that the voltage of the machine and the wall outlet are compatible. If your machine is not supplied with a factory fitted molded plug then a qualified electrical engineer must be contracted to wire the unit to the power supply.
• Before using the appliance for the first time, it is recommended to clean the appliance according to instructions (see chapter “Cleaning and Maintenance”).

Installation

1. The machine must be positioned on a flat and stable surface.
2. Choose a surface where the machine is not exposed to direct sunlight, or close to a direct source of heat such as a cooker, oven or radiator.
3. When positioning the appliance, maintain a distance of 10cm (4 inches) between the appliance and walls or other objects for ventilation and ease of use.
4.  Position the machine in such a way that the plug is accessible at all times.
5. Assemble any required parts (if applicable).
6. Plug the power plug into a grounded and compatible socket.

Operation

• Switch on the device using the “ON/OFF” key located at the front of the main body.
• Put your ingredients in the jug and secure the lid in place. If the lid is not positioned correctly the appliance will not function. Use the designated opening in the lid if you want to add ingredients during operation.
• Place the jug on the main body and set the timer using the “TIME +/-“ keys.
• Set the blending speed using the “SPEED +/-“ keys.
• Press the “ON/OFF” key to start (or stop) operation. The appliance will stop automatically after the preset time has elapsed.
• The blender also has several operation presets. Simply press one of the designated preset keys and press the “ON/OFF” key to start.
• For quick manual operation press the “PULSE” key. This allows you to control the blend very precisely.
• Clean the appliance after use (see chapter “Cleaning and Maintenance”).
• When not in use, switch off the machine using the “ON/OFF” switch.
• If the appliance will not be used for a longer period, please also remove the plug from the main socket.

Troubleshooting

The follow overview will help you understand possible problems. However, only qualified technicians should attempt to open or repair the machine. Contact your supplier when in doubt.

§   Incorrect electrical input.

§   Lid or jug is not positioned

correctly.

| Ø  Plug power supply in socket.

Ø  Use compatible power source.

Ø  Mount lid or jug properly.

The appliance has stopped working.| §   Overheated (overheat protection activated).

§   Jug is overloaded with ingredients

or composition is too dense.

| Ø  Let the appliance cool down for at least 30 minutes and restart.

Ø  Reduce load or change

composition of ingredients.

The appliance does not heat.| §   Wrong programme selected.

§   Heating element defective.

| Ø  Choose different programme.

Ø  Replace part.

The appliance makes unusual noise.| §   Jug or lid not installed correctly.

§   Transmission or drive socket damaged.

§   Blade (assembly) damaged.

| Ø  Install all components correctly.

Ø  Replace part.

Ø  Replace part.

Jug leaking.| §   Jug damaged or cracked.| Ø  Replace jug.

Cleaning and Maintenance

• Maintenance and repairs should only be done by a certified technician.
• Regularly check and clean the appliance, its parts and accessories (if applicable).
• Regularly check the power plug and power cable for damage. If either is damaged do not use the appliance. Instead, have it repaired by a certified electrical engineer.
• Always switch off and disconnect the power supply before cleaning or maintenance.
• Let the appliance cool down before cleaning or maintenance.
• ATTENTION! Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol-based cleaning agents. Some cleaning agents may leave harmful residues or cause damage to the machine. Use a food safe detergent instead.
• ATTENTION! Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage to the machine.
• ATTENTION! Never hose down the machine or immerse it in water or any other liquid, instead wipe the exterior with a damp cloth or sponge. Do not use a steamer to clean the appliance
• ATTENTION! Never let the power cable or power plug get wet or damp.
• Wipe down the exterior using a damp cloth. The jug can easily be cleaned by partially filling it with warm soapy water and operating the appliance in pulse mode. Then pour out the dirty water and rinse under tap to remove soap residue. Try to keep the bottom of the jug as dry as possible, if it gets wet dry immediately. Always dry the appliance, parts and accessories after cleaning using a soft cloth.

Storage

• Make sure the appliance is cleaned properly before storage.
• Coil up the power cable and put it away.
• Store in a cool and dry place.

Discarding
When discarding the appliance, do so in compliance with local, state and national regulations.

Spangenberg International B.V. – Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445 info@maximaholland.nl – www.maximaholland.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>