LEVITON ODP10-M1x Smart Multi Tech 1000W Dimming Wallbox Sensor User Guide
- June 16, 2024
- Leviton
Table of Contents
- LEVITON ODP10-M1x Smart Multi Tech 1000W Dimming Wallbox Sensor
- Product Information
- Product Usage Instructions
- Frequently Asked Questions
- Overview
- Description
- Applications
- Features
- Wiring Diagrams
- Field of View Diagram
- Dimensions Diagram
- Specifications
- Ordering Information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LEVITON ODP10-M1x Smart Multi Tech 1000W Dimming Wallbox Sensor
Product Information
Specifications
- Electrical
- Input Voltage/Frequency: 120VAC, 60Hz
- Input Current: 120V
- Standby Power: 0.2W
- Max Power: 0.5W + Load Current
- Load Ratings:
- Single Device: LED, CFL, Electronic Ballasts @ 120V – 1000W; Resistive, Tungsten @ 120V – 600W
- *Two Devices:** LED, CFL, Electronic Ballasts @ 120V – 680W; Resistive, Tungsten @ 120V – 600W
- *More Than Two Devices:** LED, CFL, Electronic Ballasts @ 120V – 600W; Resistive, Tungsten @ 120V – Not rated for use
- IP Rating: IP20
- Network Connections: BLE 4.2, BLE 5.0
- Environmental
- Operating Temperature
- Storage Temperature
- Physical
- Dimensions: 4.13 x 2.12 x 1.86 inches (104.90mm x 53.95mm x 47.25mm)
- Other
- Energy Codes: Can be used to comply with ASHRAE 90.1, IECC and 2022 Title 24, Part 6 occupancy/vacancy sensing, dimming, and manual-ON/auto-OFF requirements
- Listings: IECC, UL, and cUL Listed
- Certifications: FCC, IC
- Warranty: Limited five-year warranty
Product Usage Instructions
Configuration
The configuration of the ODP10 can be done using the Leviton Smart Sensor App
from a smartphone or other Bluetooth-enabled Android or iOS device.
Alternatively, you can also perform a simple configuration using the
pushbutton setup for several common pre-configured options.
Programmable Options
Button (#)| Operating Mode| PIR Sensitivity (%)| Microphonics Sensitivity (%)|
Time Out (mins)
---|---|---|---|---
1| Auto-ON/Auto-OFF| 75| 75| 20
2| Auto-ON/Manual-OFF| 100| OFF| 10
3| Auto-ON/Manual-OFF| 75| 50| 20
4| Auto-ON/Auto-OFF| 100| 75| 10
5| Manual-ON/Auto-OFF| 100| OFF| 20
6| Auto-ON/Auto-OFF| OFF| 50| 10
7| Manual-ON/Auto-OFF| 75| 75| 20
8| Auto-ON/Manual-OFF| 100| OFF| 10
9| Auto-ON/Manual-OFF| 75| 50| 20
10| Manual-ON/Auto-OFF| 100| 75| 10
11| Auto-ON/Auto-OFF| 100| OFF| 20
12| Manual-ON/Auto-OFF| OFF| 50| 10
Frequently Asked Questions
-
Q: How do I configure the ODP10?
A: You can configure the ODP10 using the Leviton Smart Sensor App on your smartphone or other Bluetooth-enabled Android or iOS device. Alternatively, you can use the pushbutton setup for pre-configured options. -
Q: What is the maximum load rating for the ODP10?
A: The maximum load rating for a single device is 1000W. For two devices, it is 680W. For more than two devices, it is 600W. Please note that the ODP10 is not rated for use with motors. -
Q: What are the dimensions of the ODP10?
A: The dimensions of the ODP10 are 4.13 x 2.12 x 1.86 inches (104.90mm x 53.95mm x 47.25mm). -
Q: Can the ODP10 be used to comply with energy codes?
A: Yes, the ODP10 can be used to comply with ASHRAE 90.1, IECC, and 2022 Title 24, Part 6 occupancy/vacancy sensing, dimming, and manual-ON/auto-OFF requirements. -
Q: What are the warranty details for the ODP10?
A: The ODP10 comes with a limited five-year warranty.
Overview
Description
The Leviton Smart 1000W Dimming Wallbox Sensor (ODP10-M1x) can easily switch and dim incandescent and dimmable LED or CFL bulbs while monitoring a room for occupancy using Passive Infrared (PIR) detection and Microphonics technology. The PIR sensor uses a specialized segmented and tamper-resistant lens that divides the field of view into sensor zones. When a person passes in or out of a sensor zone the sensor detects motion and switches the lights ON. The lights will remain ON as long as an occupant moves through the sensor zones and will turn off when the space becomes vacant and after the timeout expires. The ODP10 also utilizes Microphonic technology that “listens” for human activity in space and will keep the lights ON when motion is detected. Microphonics does not require a direct line of sight and can pick up human activity behind obstructions that PIR-only devices are unable to detect. The ODP10 features a vacancy mode for manual-ON/auto-OFF operation, ideal for installations where manual-ON switching is required for energy code applications. Lighting levels can be adjusted using the dimming bar next to the switch.
A “minor motion” zone detects small body movements. This detection allows the lights to remain ON when individuals in the space are more stationary. The “major motion” zone exhibits a lesser degree of sensitivity requiring larger movements.
Configuration of the ODP10 is made using the Leviton Smart Sensor App from a smartphone or other Bluetooth-enabled Android or iOS device. Simple configuration can also be applied using pushbutton setup for several common pre-configured options. The ODP10 integrates a photocell for daylighting hold- OFF which can be programmed using the Leviton Smart Sensor App.
Applications
- Offices
- Lobbies
- Small meeting rooms
- Retrofit applications
- Bathrooms/Restrooms
- Conference Rooms
Features
- Can be used to comply with ASHRAE 90.1, IECC, and 2022 Title 24, Part 6 occupancy/vacancy sensing, dimming, and manual-ON/auto-OFF requirements
- Fits in a standard wall box and is changeable with other units
- Meets NEMA SSL 7A Dimmer Compliance
- Controls LED lighting loads up to 1000W
- One relay module for single-level switching
- 180° field-of-view provides approximately 1,100 square feet of coverage
- Latest PIR technology accurately detects minor motion up to 400 sq ft and major motion up to 1,100 sq ft
- Maximum sensing distance in front of the sensor is 30-40 feet and 15-20 feet on either side
- Microphonics technology can detect human activity and does not require direct line-of-sight
- Integrated photocell for daylighting hold-off
- Easy access Air Gap switch when replacing lamp(s)
- Tamper-resistant PIR lens
- Use the Leviton Push to Pair (P2P) process to create a multi-way system for up to 5 devices
- Advanced configuration can be performed using the Leviton Smart Sensor App on any Bluetooth-enabled Android or iOS device:
- Set the operating mode for Occupancy (Auto-ON/Auto-OFF) or Vacancy (Manual-ON/auto-OFF)
- Adjust sensitivity and timeouts
- Set up partial-ON and partial-OFF levels and partial-OFF timeouts
- Enable the integrated photocell for daylighting hold-OFF and select target daylighting hold-OFF levels
- Create custom templates for easy multi-room replication of sensor settings
- Activate the nightlight and select the nightlight color
- Set a security code to lock configuration settings
- Out-of-the-box configuration default mode:
- Auto-ON/Auto-OFF with 20-minute time out
- Sensitivity set to 75%
- Nightlight and daylighting disabled
- Convenient pushbutton hold configuration for installers—no smart device needed*:
Pushbutton Hold Configuration
Button (#)| Operating Mode| PIR Sensitivity (%)|
Microphonics Sensitivity (%)| Time Out (mins)
1|
Auto-ON/ Auto-OFF
|
75
| 75| 20
2| 10
3| OFF|
20
4| 50
5| 100| 75
6| 100
7|
Manual-ON/ auto-OFF
|
75
| 75
8| 10
9| OFF|
20
10| 50
11| 100| 75
12| 100
Requires removal of front face cover
Wiring Diagrams
ODP10-M1x
Field of View Diagram
Dimensions Diagram
Front View
Side View
Top View
Specifications
Electrical
Input Voltage/Frequency| 120VAC, 60Hz
Input Current
120V| Standby: 0.2W; Max: 0.5W+Load Current
Load Ratings| Single| Two Devices| More Than Two Devices
LED, CFL, Electronic Ballasts @ 120V| ****
1000W
| ****
680W
| ****
600W
Magnetic Ballasts @ 120V
Resistive, Tungsten @ 120V
Motor @ 120V| Not rated for use
IP Rating| IP20
Network Connections| BLE 4.2, BLE 5.0
Environmental
Operating Temperature| 32 to 104°F (0 to 40°C)
Storage Temperature| -40 to 185°F (-40 to 85°C)
Physical
Dimensions| 4.13” x 2.12” x 1.86” (104.90mm x 53.95mm x 47.25mm)
Other
Energy Codes| Can be used to comply with ASHRAE 90.1, IECC, and 2022 Title 24,
Part 6 occupancy/vacancy sensing, dimming, and manual-ON/auto-OFF requirements
Listings| IECC, UL, and cUL Listed
Certifications| FCC, IC
Warranty| Limited five-year warranty
For multi-gang devices mounted side by side
Ordering Information
Smart Wallbox Sensors
Cat. No.| Description
ODP10-M1W| Smart Multi-Tech 1000W Dimming Wallbox Sensor, App configurable;
auto-ON/auto-OFF or manual-ON/auto-OFF, neutral wire required, 120VAC,
50/60Hz, White
ODP10-M1I| Smart Multi-Tech 1000W Dimming Wallbox Sensor, App configurable;
auto-ON/auto-OFF or manual-ON/auto-OFF, neutral wire required, 120VAC,
50/60Hz, Ivory
ODDKT-00E| Smart Dimming Wallbox Sensor Color Change Kit, Black
ODDKT-00R| Smart Dimming Wallbox Sensor Color Change Kit, Red
ODDKT-00G| Smart Dimming Wallbox Sensor Color Change Kit, Gray
ODDKT-00I| Smart Dimming Wallbox Sensor Color Change Kit, Ivory
ODDKT-00T| Smart Dimming Wallbox Sensor Color Change Kit, Light Almond
ODDKT-00W| Smart Dimming Wallbox Sensor Color Change Kit, White
Leviton Manufacturing Co., Inc. Lighting & Controls
201 North Service Road, Melville, NY 11747-3138 tel
800-323-8920 tech line (8:00 AM-10:00
PM ET Mon-Fr, 9:00 AM-7:00 PM ET Saturday, 9:00 AM-5:00 PM ET)
800-824-3005 ©2023 Leviton
Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Leviton Manufacturing Co., Inc. Lighting & Controls
10385 SW Avery St., Tualatin, OR 97062 tel
800-736-6682 tech line (6:00 AM-4:00 PM
PT Mon-Fri) 800-959-6004.
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tel
800-323-8920 tech line (8:00 AM-10:00
PM ET Mon-Fr, 9:00 AM-7:00 PM ET Saturday, 9:00 AM-5:00 PM ET)
800-824-3005
Visit our Website
at:www.leviton.com/smartsensors
©2023 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change
without notice.