TESLA VCR600W Robot Vacuum Cleaner User Manual

VCR600W
ROBOT VACUUM CLEANER

WI-FI FUNCTION
USER MANUAL

WI-FI MODULE SPECIFICATION AND

OPERATION GUIDELINE

1. Minimum specifications on a smartphone: Android 5.0 version or higher IOS 9.0 version or higher
2. Basic parameters for Wi-Fi module
   Parameters| Details
   ---|---
   Network frequency| 2.400 – 2.4835 GHz
   Standards of WLAN| IEEE 802.11 b/g/n (channels 1-14, channels 1-13 for EU/AU, channels 1-11
   for US/CA)
   Protocol stack support| IPv4/TCP/UDP/HTTPS/TLS/DNS
   Security support| WEP/WPA/WPA2/AES128
   Network type support| STA/AP/STA+AP
   Max. RF Power| 18.5 dbm
   Blue tooth frequency| 2.402 – 2.480 GHz
   Blue tooth RF Power| 9 dbm
3. Operation guideline. Please use the simple guideline instructions below as a reference.

Operation Steps| Operation Items| New Account| Re-install APP (registered before)
---|---|---|---
Step 1| Download and Install APP| YES| YES
Step 2| Activate APP| YES| YES
Step 3| Account Registration| YES| NO
Step 4| Login| YES| YES
Step 5| Add Device to control| YES| Registered Device will remain

DOWNLOAD AND INSTALL THE APP

|
---|---
https://play.google.com/store/apps/details?id=com.smart.tesla| https://apps.apple.com/us/app/tesla-smart-things/id1567096522

For Android smartphones
Method 1: Please scan the QR code with a browser scanner, and download and install the APP.
Method 2: Open the Google “Play Store” on your smartphone and search “Tesla Smart”, download and install the APP.
For IOS smartphones
Method 1: Please scan the QR code and follow the tips to get into “AppStore”, download and install the APP.
Method 2: Open the Apple “AppStore” on your smartphone and search “Tesla Smart Things”, download and install the APP.
Note: Please enable the Storage/Location/Camera permissions for this APP during the installation. Otherwise, it will have some problems when operating.

REGISTRATION

1. If you don’t have an account please tap the “Register” button.
2. Read the Privacy Policy and tap “Agree”.

LOGIN

1. Tap “Sign in with an existing account”.
2. Enter your registered account username and password.
3. Tap the “Sign in” button.

REGISTRATION

1. Enter the verification code you received via e-mail.
2. Set the Password with 6-20 characters, including characters and numbers.
3. Tap “Done”.

LOGIN

1. Tap “Log in with existing account”.
2. Enter your registered account username and password.
3. Tap “Log in” button.

Forgot the password
If you forgot the password or you want to reset the password, follow these steps:

1. Tap “Forgot password”.
2. Enter your account username (e-mail address) and tap the “Obtain verification code” button.
3. Enter the verification code received via e-mail.
4. Set the new password and tap the “Done” button.

ADDING DEVICES

AP mode

1. Power on the robot
2. Press both the HOME and the ON button for more than 3 seconds, until the robot starts flashing and voice prompts “Wi-Fi lost, please follow the APP instructions”
3. Ensure your phone is connected to the same network you wish to connect the robot
4. Select “Small Home Appliance”
5. Tap the “Robot vacuum (Wi-Fi)” logo
6. Input the password of the Wi-Fi to which your smartphone is connected, then tap “Next”
7. Tap + in the upper right corner and choose “AP Mode”, follow the comments on the screen to reset the Wi-Fi module modem is reset by pressing HOME and the ON button for more than 3 seconds, check “Confirm the device is reset” and tap “Next”
8. Read the instruction carefully and tap “Connect now”
9. Connect your mobile phone to the device’s hotspot
10. You can see the percent rate of the connection process, in real-time.

www.tesla.info 

References

• Tesla.info | Technology for all

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>