Spigen PE2201UJ ArcStation Pro GaN 651 Wall Charger User Manual
- June 16, 2024
- Spigen
Table of Contents
Spigen ArcStation Pro GaN 651 Wall Charger
User Manual
PE2201UJ
THANK YOU for your purchase!
If you have any issues or concerns, let us know at
US, EU & Others: [email protected]
KR: [email protected]
We are Prepared and Ready to Solve
Your Problems!
Instruction
-
Plug it in
-
Charge your phone or tablet or laptop
Caution
Keep away from extreme temperatures.
Do not expose to liquids.
Avoid dropping.
Do not dismantle.
To ensure your safety and obtain maximum charging speeds, please use the cable provided by Spigen or the manufacturer of your device, or certified(Such as MFi).
Important Safety Instructions
- The product is designed and developed for use with IT equipment only.
- While the product is in use, the maximum ambient temperature must not exceed 25°C.
- No naked flame sources – such as candles – should be placed near the product.
- The disconnection from line voltage is caused by AC plug.
- Please discard the product if the cords or plugs are damaged.
- Wipe the product with a dry cloth to clean it.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel (the product can be discarded in case of failure or component defects).
Specifications
| Model | PE2201UJ |
|---|---|
| Input | 100-240V~, 50/60Hz, 1.5A |
| USB-C Output | 5.0V⎓3.0A, 9.0V⎓3.0A, 15.0V⎓3.0A, 20.0V⎓3.25A PPS: |
5.0V~20.0V⎓3.25A
Total: 65.0W MAX
Dimensions| 28.5 x 40.5 x 50.5mm / 1.12 x 1.59 x 1.99in
Weight| 96.0g / 3.39oz
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The following importer is the responsible party (for FCC matters only)
Spigen Inc. 9975 Toledo Way #100, Irvine, CA 92618 USA
E-mail : [email protected]
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B)
This device complies with Industry Canada license ICES-003.
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2)This device must accept any interference, including interference that may
cause undesired operation of the device.
Customer Service
24-month limited warranty
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given under this limited warranty.
US and Canada Customers Only
Distributed by Spigen, Inc. in Irvine, CA 92618, USA
Manufacturer : Spigen Korea Co., Ltd. 3MN109780