NUBEX YN78ROYLQGMP Wireless Baby Moniter System User Manual

NUBEX YN78ROYLQGMP Wireless Baby Monitor System User Manual

Quick Start

NOTE: Use only the power adapters included in the package.
**Step : 1

Step : 2

Step : 3

**

Status Bar

1. Signal Strength Indicator
2. Volume level
3. Channel Selected
4. Lullaby
5. VOX Sensitivity
6. Night Vision
7. Zoom
8. Temperature Of The Baby’s Room
9. Alarm Timer Active
10. Battery Power
11. PTT Function Active
12. Pan& Tilt Function Active

Baby Unit

1. Light Sensor
2. Camera Lens
3. Microphone
4. Infrared LEDs
5. Power LED Indicator
6. Antenna
7. DC Jack IN
8. Temperature Sensor
9. PAIR Button
10. Speaker

Parent Unit

1. Power ON/OFF/Sleep Button
2. Pan& Tilt Button
3. Volume+/Up Button
4. Brightness+/Right Button
5. OK/Switch Button
6. Brightness-/Left Button
7. Volume-/Down Button
8. PTT Button
9. Menu/ZOOM Button
10. Microphone
11. Charging LED Indicator
12. Volume Level LED
13. LCD Screen
14. Speaker
15. Kickstand
16. Reset(under the kickstand)
17. DC Jack IN

Pairing

The Baby Unit is pre-registered and connected to your Parent Unit. If you need to pair Baby Unit and Parent Unit again, do the following:

Select MENU>Camera >Add camera>OK.

Please short press.
PAIR bunion on Baby Unit.

Menu Operation

1. Lullaby

Select MENU>Lullaby >Select the lullaby. playback time, playback volume>OK.

2. Timer
   
   Select MENU>Timer >select the time>OK.

3. VOX Sensitivity
   
   Select MENU>VOX >Select the sensitivity >OK.

4. Temperature
   
   Select MENU>Temperature >Select °C or °F, set the maximum and minimum alarm temperature >OK.

5. Setting

Select MENU>Setting >Select Language, Frequency or Reset icon to set>OK.

Safety Instructions

• An adult is required to install. Keep small parts away from the children when assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Do not place the baby unit or cables in the cot or within arm’s reach of the baby(at least 1 meter away). Keep the cords out of the reach of children.
• Do not use the baby monitor near water or heat source.
• Only use the power adapters provided.
• Do not touch the plug contacts with sharp or metal objects.
• This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Specification

General:

RF Frequency:| 2400 MHz-2483 MHZ
Modulation Mode:| GFSK
Spread Spectrum:| FHSS
Operating Temperature:| -10 to +45°C
Operating Humidity:| <85%
Transmission range:| Up to 1000 feet in open field
Monitor:
LCD Display:| 5.0″ color LCD
Resolution:| 480×272 pixel
Battery:| 3000 mAh Li-ion 3.7V rechargeable
Duration(Screen on):| 8 Hours
Duration(Audio-only mode):| 16 Hours
Time to full charge:| 5 Hours
Power adapter:| Input: 100-240VAC, 50-60Hz: Output: 5V/1A
Camera:
Sensor:| CMOS 640×480 pixel
Vertical turning angle:| 90° up, 30° down
Horizontal turning angle:| 165° left, 165° right
Night vision:| 8 IR LEDs
Power adapter:| Input: 100-240VAC, 50-60Hz:
Output: 5V/1A

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>