RITTAL SV 9635.020 Board RiLine Compact Instruction Manual
- June 12, 2024
- RITTAL
Table of Contents
Rittal -The System.
Faster – better – everywhere.
RiLine Compact – Board
SV
9635.020 SV 9635.025
SV 9635.030 SV 9635.035
SV 9635.040 SV 9635.045
SV 9635.050
Technical specifications
Model No.| SV 9635.020| SV 9635.025| SV 9635.030| SV
9635.035| SV 9635.040| SV 9635.045| SV 9635.050
---|---|---|---|---|---|---|---
Width mm| ****
500
| ****
600
| ****
700
| ****
800
| ****
900
| ****
1000
| ****
1100
Height mm| 160
Depth mm| 45
Max. rated current A| 160 IEC / 160 UL
V, AC Rated operating voltage| 690 IEC / 600 UL
V, DC Rated operating voltage V| 600
Number of poles| 3-polig 3-pole / 3-pôles
Bar centre distance mm| 60
For screw fastening| ■
Notes on documentation
The assembly instructions are aimed at all persons who have an appropriate
specialist training to allow them to equip enclosures to conform to standards
with electrical, electronic, mechanical or pneumatic operating equipment, to
place or install at the destination site and to connect ready to operate.
The original assembly instructions are written in German.
2.1 CE labelling
The declaration of conformity can be downloaded from the Rittal website.
2.2 Storing the documents
These assembly instructions are part of the delivered product. They must be
stored for the installation engineer, operator, maintenance and cleaning
personnel in any easily accessible location near the product.
2.3 Symbols used
Observe the following safety and other notes in the instructions:
Symbol identifying required actions:
◾ The bullet point indicates an action to be performed.
Safety and other notes:
Danger!
Immediate danger to life and limb.
Caution!
Potential threat to the product and its environment.
Note:
Useful information and special features.
2.4 Other applicable documents
These assembly instructions for the described busbar components can be
downloaded from www.rittal.com. We cannot accept any liability for damage
associated with failure to observe these instructions. The instructions for
any accessories used also apply.
2.5 Disposal of waste electrical equipment!
Never dispose of old electrical equipment in household waste!
Safety instructions
To prevent electric shock, disconnect from power source before installing or
servicing.
Install in suitable enclosure.
Keep free from contaminants.
To be commissioned and maintained only by qualified personnel!
| **** | Caution: Sharp object |
|---|---|
| The instructions must be read | |
| Installation by specialist electricians | |
| Installation by specialist mechanics |
Assembly and siting
4.1 Dimensions and component variants
4.2 Assembly on mounting plate
Dismantling
Storage
When storing these components, ensure that
- the ambient temperature is not higher than +70 °C.
- the ambient temperature is not lower than -25 °C.
- the relative humidity lies between 10% and 95% (non-condensing).
Power Distribution
You can find the contact details of all Rittal companies throughout the
world here.
www.rittal.com/contact
RITTAL GmbH & Co. KG
Auf dem Stuetzelberg · 35745 Herborn · Germany
Phone +49 2772 505-0
E-mail: [email protected] ·
www.rittal.com
References
- Rittal – Enclosures, Power distribution, Climate control, IT infrastructure, Software & services, Automation
- Rittal Startseite. Mit Rittal Komplexes einfach machen – das ist die Leitidee. Schaltschränke, Stromverteilung, Klimatisierung, IT-Infrastruktur, Software & Service, Automation
- Rittal - Habillage électrique, Distribution de courant, Climatisation, Infrastructure IT, Logiciels & service