TOSCANO DA5154 Hanging Wall Art Instructions
- June 16, 2024
- TOSCANO
Table of Contents
TOSCANO DA5154 Hanging Wall Art
Wall Hanging Instructions
Sometimes a little planning goes a long way to save time and unwanted holes in your walls. Just follow these simple steps and you’ll be amazed at how easy it is!
-
Step I: Decide where you want to place your wall art. Allow some space around the piece to ensure it doesn’t crowd existing works or architecture.
-
Step 2: Create a template. Locate some newspaper and tape it together so that it is slightly larger than the piece.
-
Step 3: Place the wall art on top of the paper and trace around the piece, then cut out the template.
-
Step 4: Flip both the wall art and the template over so that the wall art is face-down and the paper is on top. Locate the keyhole slots (or hooks) and poke holes through the paper to mark their positions. (Highlighting the holes with a marker will help you find them later.)
-
Step 5: Now is the time to find the exact spot on your wall. Tape the template to the wall, make sure the paper is straight, and check that it is exactly where you want your wall
art to hang. -
Step 6: Using the highlighted holes on the paper as your guides, pre-drill and insert anchor plugs (not included) to create a foundation for your screws.*
-
Insert screw into anchor leaving a minimum of 5/16· of mounting screw exposed from wall. Then slide keyhole slot (or hook), down so screwhead is locked into place.
-
Anchor hardware should be rated for the weight of your artwork or more.
**Design Toscano is not responsible for any damages due to failed hangers and/or improper installation.
©Copyright 2023, Design Toscano, Inc.
1.800.525.0733 DESIGNTOSCANO.COM