Avantree DG60P Long Range Bluetooth Audio Adapter User Guide
- June 16, 2024
- Avantree
Table of Contents
Aventred **DG60P Long Range Bluetooth Audio Adapter User Guide
**
Product Overview
Important Notice
- NO BLUETOOTH icon will appear on the Taskbar when the DG60P is plugged into your PC. It should be recognized as a USB sound card / USB speaker.
- This device does NOT work with mice, keyboards, or game controllers. It is for audio transmission only.
- For minimum audio delay, please ensure that your Bluetooth headphone / speaker supports either apt Low latency or apt Adaptive. Otherwise, you will get 150~250ms delay
Button Functions
| No. | Buttons | Functions |
|---|---|---|
| 1 | Multifunctional button (MFB) | Press & hold for 2 seconds to enter |
pairing mode
Double-click while pairing to clear pairing history
Double-click while connected topstitch between music and talk mode
Click once to reconnect
2| Music / Gaming switch| If your headphones / speaker supports apt HD,
apt Adaptive or apt Low Latency, please slide switch to “For music” to enable
high quality audio, or “For gaming” to enable low latency.
LED Indicators
| Indicator | Status |
|---|---|
| Alternate blue & white flashes | Pairing |
| Solid blue | Connected |
| Blue flash every 1 second | Reconnecting |
| Blue flash every 10 seconds | Disconnected |
| Solid blue for 2 seconds, then | Clearing pairing history |
| Solid green | Streaming audio with apt Adaptive codec |
| Green flash every 5 seconds | Streaming audio with apt HD, apt Low latency |
codec
Green flash twice every 5 seconds| Streaming audio with apt, SBC codec
Solid white| Talk mode
Pairing & Connecting
- Plug the DG60P into a USB port. For first time use, the DG60P automatically enters pairing mode with the LED flashing BLUE & WHITE. If not, manually enter the DG60P into pairing mode: Press & Hold the MFB until the LED flashes BLUE & WHITE.
- Put your Headphone / Speaker into “Bluetooth Pairing Mode”. Please refer to your device’s user manual for more information.
- Once connected, the LED on the DG60P will turn SOLID BLUE.
Use with PC
STEP 1 Follow “5 Pairing & Connecting” to connect your headphones and PC.
STEP 2 Choose “Aventred DG60P” as the default audio input/output device.
STEP 3 For VoIP Call – please repeat the Step 2 in your meeting software (i.e. Teams. Zoom, Skype, etc.)
NOTE : A solid white LED indicates talk mode. A Blue or Green LED indicates music mode. The DG60P will auto-switch between talk & music modes. You can also manually swap modes by double-clicking the dongle’s MFB button.
Use with PS5
STEP 1 Plug the DG60P into the PS5’s USB port and follow “5 Pairing & Connecting” instructions to connect your Bluetooth headphones.
NOTE:
- The pairing / connection happens through the DG60P, not your PS5, so it won’t show in “Bluetooth accessories”.
- Ensure Bluetooth is disabled on devices like your phone or smart watch to prevent accidental connection;
- Ensure the headphones are Bluetooth as some headphones like “Sony PULSE 3D” or “Turtle Beach Stealth 600 Gen 2” use 2.4G technology and cannot connect to phones or the DG60P.
STEP 2 Set the Audio Mode
-
If you’re concerned about the audio quality drop in talk mode, you can use your Stroller’s mic instead and set the dongle to music mode, Double-click the dongle’s MFB to enter music mode for the best audio quality. A Blue LED indicates music mode. Or, if you don’t need to chat and only need game audio, likewise set the dongle to music mode.
-
If you want to chat with your teammate using your headphones’ mic, the DG60P should enter talk mode by default. A solid white LED indicates talk mode. You may nd that the headphones’ volume and audio quality drops in talk mode. This is due to a technological limitation with Bluetooth.
Contact Us
Support Tickets avantree.com/submit-a-ticket
Support Email [email protected]
Support Numbers
US +1 800 232 2078 (9am-6pm, PST, Mon-Fri)
CA +1 800 232 2078 (9am-6pm, PST, Mon-Fri)
UK +44 208 068 2023 (9am-6pm, GMT, Mon-Sat)
DE +49 322 2109 7297 (11am-9pm, CET, Mon-Sat)
FR +33 17 634 0312 (11am-9pm, CET, Mon-Sat)
IT +39 069 4803 330 (9am-6pm, CET, Mon-Sat)
ES +34 93 1786 261 (9am-6pm, CET, Mon-Sat)
AU +61 2 8310 9897 (11am-7pm, AEST, Mon-Fri)
FAQ avantree.com/support/eon
Product Registration See QR code on the product tag.
Manufacturer:
Avantronics Limited
Lihou District, Shenzhen 518000 China
+ 86 755 8228 5022 [email protected]
US Importer:
Aventred Corporation
San Jose, California 95119 USA
+1 800 232 2078 [email protected]
UK Importer:
Aventred Limited
Watford, WD180 0HQ UK
+44 20 8068 2023 [email protected]
Servicer in Europe:
Gizmo GmbH,
Sternest. 67, 40479 Dusseldorf, Germany
+49 322 2109 7297 [email protected]
Model No: BTDG-60-P
Dispose of the packaging and this product in accordance with the latest
provisions.
Z-PKQG-DG60P-V2