Linksys WRT300N Wireless-N Broadband Router User Guide
- June 16, 2024
- Linksys
Table of Contents
Linksys WRT300N Wireless-N Broadband Router
Product Information
Specifications
- Model: Linksys WRT300N
- Supported Version: v1
- Color: Blue
- Firmware: dd-wrt.v24_wrt300n.bin
Product Usage Instructions
Firmware Upgrade
To upgrade the firmware on your Linksys WRT300N v1 router, follow these steps:
- Download the firmware file “dd-wrt.v24_wrt300n.bin” from the official Linksys website or a trusted source.
- Connect your computer to the router using an Ethernet cable.
- Open a web browser and enter the default IP address of the router (usually “192.168.1.1”) in the address bar.
- Enter your router’s username and password to log in. If you haven’t changed these, the default credentials are usually “admin” for both.
- Navigate to the “Administration” or “Firmware Upgrade” section in the router’s web interface.
- Click on the “Choose File” or “Browse” button to locate and select the firmware file you downloaded.
- Click “Upgrade” or “Apply” to start the firmware upgrade process.
- Wait for the upgrade process to complete. Do not power off or restart the router during this time.
- Once the upgrade is finished, the router will reboot automatically.
Wake On LAN (WoL) Configuration
To enable Wake On LAN feature on your Linksys WRT300N v1 router, follow these steps:
- Access the router’s web interface using the steps mentioned above.
- Navigate to the “Advanced” or “Management” section.
- Look for the “Wake On LAN” or “WoL” option and enable it.
- Save the settings and restart the router for the changes to take effect.
User Inquiry
A user has recently purchased a Linksys WRT300N and attempted to upgrade the
firmware to enable Wake On LAN functionality. The user followed the
instructions to install the firmware file dd-wrt.v24_wrt300n.bin, but
encountered an error during the upgrade process. The error message indicated
that the firmware was not designed for the user’s router model.
Community Response
The community has responded with the clarification that only version 1 (v1) of the WRT300N is supported by the dd-wrt firmware. The user is advised that model v2 is not supported due to using a completely different chipset.
It is also mentioned that the physical distinction between the two versions is the color of the router’s case: version 1 has a blue case while version 2 has a silver case.
Specifications
| Feature | WRT300N v1 | WRT300N v2 |
|---|---|---|
| dd-wrt Support | Supported | Not Supported |
| Chipset | Specific to v1 | Different Chipset |
| Case Color | Blue | Silver |
FAQ
Can I install dd-wrt firmware on any version of the Linksys WRT300N?
No, the dd-wrt firmware is only compatible with the WRT300N version 1 v1.
How can I distinguish between the WRT300N v1 and v2?
The WRT300N v1 has a blue case, while the WRT300N v2 has a silver case.
What should I do if the firmware upgrade for my WRT300N fails?
Confirm that you have the correct version of the router v1 and that you are using the correct firmware file. If the problem persists, seek assistance from the community or customer support.
Is it possible to enable Wake On LAN on a WRT300N v2?
The ability to enable Wake On LAN on a WRT300N v2 depends on the availability of compatible firmware and support. The v2 model is not supported by dd-wrt firmware.
Can I upgrade the firmware on my Linksys WRT300N v2 router?
No, the dd-wrt firmware only supports the WRT300N v1 model. The v2 models have a different chipset and are not compatible with this firmware.
Talk:Linksys_WRT300N_v1,_v1.1
I have just purchased a WRT300N and I wanted to upgrade the firmware to enable Wake On LAN. I followed the instructions for installing dd-wrt.v24_wrt300n.bin but the firmware upgrade fails saying it is not designed for my router. Can anyone help?
only v1 is supported
dd-wrt does just support the WRT300N v1, but not the v2 models which use a
totally different chipset. the case of the v1 is blue, whereas the v2 case is
silver only v1 is supported 1