kolin KWD-BL59BSS Bottom Load Water Dispenser Owner’s Manual

kolin KWD-BL59BSS Bottom Load Water Dispenser

Product Information

Specifications:

• Model Name: KWD-BL59BSS
• Hot water capacity: 5L/h
• Hot water power input: 550 W
• Cold water capacity: 2.8L/h
• Cold water power input: 80 W
• Unit Dimension: 260 x 330 x 1,010 mm
• Net weight: 15.5 kg

Product Features and Parts:

The Kolin Water Dispenser (Model: KWD-BL59BSS) is a bottom load water dispenser that provides hot, cold, and room temperature water through separate faucets. It is designed to be safe, durable, and innovative for an optimal user experience.

Safety Precautions:

Before using the appliance, please read all the instructions in the user manual and keep it in a secure place for reference. Failure to follow the instructions correctly can result in personal injury or property damage. Avoid storing or using flammable substances near the water dispenser, and refrain from cleaning parts with flammable fluids to prevent fire hazards or explosions.

Product Usage Instructions

Installation:

1. Allow the unit to sit upright for 2 hours to reduce the possibility of cooling system malfunctions caused by transportation.
2. After installing the water bottle in the dispenser, plug in the unit.
3. An oozing sound may occur, indicating that the pump is operating.

Operation:

Dispensing Cold & Normal Temperature Water:

1. Place a pitcher, bottle, or glass below the cold or room temperature water faucet.
2. To start dispensing water, press the downward-facing cold or room temperature water button.
3. Release the button once the container is filled to the desired level.

Dispensing Hot Water:

1. Position a bottle, glass, pitcher, or pot beneath the hot water faucet.
2. To dispense hot water, deactivate the child-safety lock by
   sliding the white button and simultaneously push the hot water button downward.

Replacing Empty Bottle:

1. Gently open the door to keep it at the proper distance from the machine in order to pull out the sucking device.
2. Hang the sucking device on the hook side after removing it.
3. When changing the bottle, remove the cap, insert the sucking device, and press firmly.
4. Insert the bottle into the water dispenser’s body. Note: The water bottle’s diameter should be smaller than 270 mm.

Thank you for choosing Kolin Water Dispenser.

Kolin Philippines International Inc. offers a wide range of products that will give convenience and comfort to your homes and businesses. Our new water dispenser aims to provide you with the best hot and cold water dispensing experience. We strive to offer you a product that is safe, durable, and innovative in order for you to achieve the best outcomes.
This water dispenser’s function is to give you a variety of water temperatures, such as hot, cold, and room temperature, via separate faucets, making your appliance easy and convenient to operate. Together with its safety features, for additional comfort and convenience.

IMPORTANT NOTE

Please read all the instructions written on this manual prior to using the appliance and keep this user manual in a secure place for reference.

Safety Precautions

To reduce the risk of injury, fire, or electric shock, the user must read this entire manual before installing, operating, and maintaining the appliance. This product dispenses water at extreme temperatures. Failure to follow the instruc-tions in this manual correctly can cause personal injury or property damage. Do not store or use gasoline or any other flammable vapors or liquids in the vicinity of the water dispenser. Never clean parts with flammable fluids as the fumes can create a fire hazard or explosion. Always practice basic safety precautions when operating this dispenser, such as:

• Do not use bottles with any cracks, leakage, or holes.
• The back part of the product should be placed in a shaded area and kept away from the wall and high-temperature components. Please also keep the product away from televisions, electric fans, electrical appliances, and other valuables.
• Do not turn on the “heating” switch until water comes out of the hot water faucet to prevent damaging the heating tube.
• Keep children away from the product during operation to avoid scalding.
• Never turn on the heating switch when there is no water.
• The degree of inclination should not be less than 45° when carrying it.
• To avoid electric shock, use a ground wire.
• Check the water receptacle often while in use. If the water receptacle is full, please empty it as soon as possible.
• Do not turn on and off the “cooling” switch within three minutes to protect the compressor and extend its usage life.
• This appliance is not designed for use by people (including children) who have limited physical, sensory, or mental capacities, or who lack experience and knowledge, unless they have been supervised or instructed on how to use the appliance by someone responsible for their safety.
• Children should be supervised to prevent them from playing with the appliance.
• This appliance is for household use only.
• If the supply cord is damaged, it must be replaced and checked by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
• Warning—– Do not tamper with the refrigerant circuit.
• Warning—– Do not use electrical appliances inside the appliance’s food storage compartment unless they are of the type recommended by the manufacturer.

Product Specification

Product Features and Parts

• Adjustable front leveling legs
• Fits standard 3 and 5 gallon bottles
• Removable drip tray for easy clean up
• Dispensing area suitable for 9.4” height bottle
• Hot and cold water, with safety lock for hot button

Installation

1. Unpacking of the Water Dispenser
   • Remove the straps from the box, but DO NOT flip it over or lean it on its side.
   • Open the box and remove the upper protective cover of the package.
   • Lift the carton box up vertically.
   • Remove the remaining protective package components.
2. Location
   • Position the water dispenser upright.
   • Place the dispenser close to a grounded wall outlet on a horizontal, sturdy surface.
   • Install it in a place that is shielded from the weather, especially from direct sunlight.
   • Leave an adequate space (10-20 cm) behind the water cooler for good ventilation.
3. Installation of the Water Bottle
   • Remove the plastic wrapping and cap from the water bottle. Then use a clean cloth to wipe down the new bottle.
   • Open the bottom cabinet door and take the water bottle’s cap off.
   • The suction pipe should be inserted into the water bottle so that it touches the bottom. For a water bottle containing 3 gallons, use the shorter suction pipe.
   • To prevent leaks, check that the water pump cover cap fits snugly over the water bottle.
   • Close the door.

Operation

WARNING

• Do NOT use other liquids such as coffee, teas, juices or beers. This unit is designed for water dispensing only.
• Do NOT use alternative bottles. The water bottles designed for this dispenser are 3 and 5 gallons only.

Initial Set-up

1. Allow the unit to sit upright for 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
2. After installing the water bottle in the dispenser, plug in the unit.
3. An oozing sound will occur, indicating that the pump is operating.

Dispensing Cold & Normal Temperature

Turn on the cooling switch on the back of the water dispenser after plugging it in. The cooling system will activate, and the green LED indicator on the front panel will turn on. The green light will switch off when the water reaches the desired temperature (5–10 °C). The cooling system will automatically restart if the cold water temperature rises above the predetermined level, indicated by the green light.

1. Put a pitcher, bottle, or glass below the cold or warm water faucet.
2. To start dispensing water, press the downward-facing cold or room temperature water button.
3. Release the button once the container is filled to the appropriate level.

Dispensing Hot Water

After the set up, turn on the heating switch on the back. The front panel’s red light will illuminate. The red light will switch off when the temperature for hot water reached (88-90°C). If the hot water temperature goes below the predetermined temperature, the red light will illuminate and the heating system will restart automatically

1. Set a bottle, glass, pitcher, or pot beneath the hot water faucet.
2. To distribute hot water, deactivate the child-safety lock by sliding the white button and simultaneously push the hot water button downward.
3. After filling the container to the desired level, release the button.
   NOTE: Practice basic safety precautions when dispensing hot water as the max-imum temperature can reach up to 90°C.

Replacing Empty Bottle

1. Gently open the door to keep it at the proper distance from the machine in order to pull out the sucking device.
2. Hang the sucking device on the hook side after removing it.
3. When changing the bottle, remove the cap, insert the sucking device, and press firmly.
4. Insert the bottle into the water dispenser’s body.

NOTE: The water bottle’s diameter should be smaller than 270 mm.

Water Low Level Indicator Light

• When the water tank is overflowing, the water low level indicator’s light is off and will alarm for one (1) minute.

• When there is water in the water storage tank, the water low level indicator light is off.
  When there is no water in the water storage tank, the water low level indicator light will flicker.

• When there is water in the storage tank but no water in the bottle, the water low level indicator will light up and alarm for 30 seconds.

• When the water storage tank and bottle are empty and the machine is locked, the water low level indicator light will illuminate and sound an alarm for 30 seconds.

• The pump stops working when you open the door. If the water level in the cold tank exceeds the water control level, the machine will continue to operate normally.

Proper Cleaning and Maintenance

General Cleaning

This cleaning will only take less than 5 minutes to perform. Do NOT use abrasive materials or chemical cleaners

1. Use a soft cloth and warm, soapy water to clean cabinet surfaces.
2. Wipe dust from the back of the dispenser to improve efficiency.
3. Remove the drip tray assembly by sliding it forward. Remove cover. Place the tray and cover in the dishwasher or wipe parts clean with a soft cloth and warm soapy water.

Cleaning Water Tanks and Lines

It is recommended to perform this cleaning operation every 3 months or whenever an off-taste occurs.

• Remove Existing Water

  • a. Turn the heating and cooling switches off.
  • b. Remove the plug from the power supply.
  • c. Turn the dispenser 90° in either direction and move it away from the wall.
  • d. Remove the water bottle by disconnecting it from the suction pump.
  • e. Prepare a large bucket of roughly 2 gallons under the dispenser’s drain plug.
  • f. WARNING: Remove the drain cap. Cold water will be dispensed into the bucket, followed by hot water.
  • g. Replace the drain cap after draining.
  • h. Then, using cold taps, drain the reservoir of any remaining water.

• Sanitize Bottle Cover Assembly and Taps

  • a. In a clean bucket, combine 3 tablespoons of unscented household bleach and 1 gallon of tap water to make a sanitizing solution. Allow it to sit for 30 minutes.
  • b. Wipe the bottle cover assembly and the area around the three taps with a soft cloth dipped in the sanitizing solution.

• Sanitize Storage Tanks

  • a. Fill an empty water bottle with a sanitizing solution.

  • b. Place the suction pipe inside the bottle and tighten the handle.

  • c. Close the cabinet door after inserting the bottle.

  • d. Plug the unit into the nearest power source.

  • e. Fill the empty tanks with the sanitizing solution.

  • f. Wait 10 minutes before unplugging the power cord from the power supply.
    g. After 10 minutes, place a heavy bucket beneath the dispenser’s drain cap and drain the sanitizing solution.

  • h. Replace the drain plug/cap after draining.

  • i. Dispense any residual sanitizing solution into a pitcher using cold and warm taps.

• Rinse Storage Tanks

  • a. Fill a water bottle with tap water and insert suction pipe into bottle.
  • b. Make sure the suction pipe is seated at the bottom.
  • c. Tighten the water bottle connection.
  • d. Close the cabinet door after inserting the bottle.
  • e. Plug the unit into the nearest power source.
  • f. Allow the water to fill the empty tanks
  • g. Allow 10 minutes before unplugging the power cord from the power supply.
  • h. Prepare a large bucket beneath the drain plug.
  • I. Take out the drain stopper.
  • j. Replace the drain cap after draining.
  • k. Push the cold water tap to dispense any residual water in the storage tank.
  • l. If vinegar taste or chlorine taste is detected, add another 2 gallons of clean water. Drain and retest.
  • m. Return the unit to its original place. Replace the water bottle. Follow the instructions in this manual for installation.

Troubleshooting

•  The circuit breaker tripped or blown fuse

Water dispenser is not cold enough| •  Check to be sure the cold switch on the back is turned on

•    The water dispenser does not have the correct clearance

Water dispenser hot water is not hot enough| •    Check to be sure the hot switch on the back is turned on
Compressor turns on and off frequently| •    The room temperature is hotter than normal

•    The water dispenser does not have the correct clearance

Vibration| •    Check to assure that the water dispenser is level
The water dispenser seems to make to much noise| •    The rating noise may be caused by the flow of the refrigerant, which is normal.

•    Each cycle may end with a gurgling sound created by the flow of refrigerant in your water dispenser.

•    Inside wall contraction and expansion can create popping and cracking noises.

•    The water dispenser is not level.

The design and specifications are subject to change without prior notice for prod-uct improvement. Any updates to the manual will be uploaded to the service website, please check for the latest version.
If you have any concerns, please contact us at the following:

• Customer hotline: (02) 8852 6868
• Text hotline: +63 917 576 0109
• Email: customerservice@kolinphil.com.ph

Also, please like and follow us on our social media accounts

• Facebook: kolinphilippines
• Instagram: kolinphilippines
• Youtube: kolinphilippines
• Tiktok:  kolinphilippines
• Website: www.kolinphil.com.ph

References

• Home | Kolin

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>