Linksys LNKPG-00730 Class A Gigabit Switch-PoE Injector User Guide

: June 3, 2024
: Linksys

Table of Contents

Linksys LNKPG-00730 Class A Gigabit Switch-PoE Injector
FCC Compliance Statement
EU Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Linksys LNKPG-00730 Class A Gigabit Switch-PoE Injector

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This product has been tested and complies with the specifications for a Class A digital device, pursuant to Part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment or devices
Connect the equipment to an outlet other than the receiver’s
Consult a dealer or an experienced radio/TV technician for assistance

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Linksys Gigabit Switch products having SFP ports should use UL Listed Optional Transceiver product, Rated 3.3Vdc, Laser Class 1.
Linksys Gigabit Switch /PoE Injector products shipped with 3-prong grounded plug power cord is intended for plugging in AC grounded outlets.

ISED Canada Compliance Statement
CAN ICES-003 (A)/NMB-003 (A)
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Safety Notices
When using this product, basic precautions should always be followed, including, but not limited to, the following:

Do not use this product near water; for example, in a wet basement or near a swimming pool.
Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Do not expose this product to rain or snow. Keep this product away from heat sources, direct sunlight, combustible gas, humidity, water, or other liquids.
Do not use this product if visible defects are observed or if it has been wet or damaged or modified. Contact Linksys customer support for assistance.
Do not disassemble, open, microwave, incinerate or paint this product or insert foreign objects into it.
Do not expose this product to fire or high temperature. Exposure to fire or high temperature may cause explosion.
Do not expose this product to mechanical shock, such as crushing, bending, puncturing, or shredding. Avoid dropping this product or placing heavy objects on it.
Please read the operating instructions and information on the minimum and maximum operating temperatures supplied with this product.
To reduce the risk of injury, close supervision is necessary when this product is used near or by children.
This product is intended for indoor use only.
Use of this product in a manner not recommended in these instructions may result in a risk of fire or injury to persons.

Equipment Name: Switch

Model: LGS124V2 /LGS124PV2 LGS310MPC/LGS328MPC/LGS352MPC/LGS328PC/LGS328C/LGS352C

**** Unit

Hexavalent Chromium

|

**** Polybrominated Biphenyls

| Polybrominated Diphenyl Ethers
(Pb)| (Hg)| (Cd)| (Cr6+)| (PBB)| (PBDE)
(PCBA)| –| ○| ○| ○| ○| ○
(Solder)| ○| ○| ○| ○| ○| ○
(Housing)| ○| ○| ○| ○| ○| ○
(Power Adapter)| –| ○| ○| ○| ○| ○
(Power Cord)| ○| ○| ○| ○| ○| ○
Note 1: “Exceeding 0.1 wt%” and “exceeding 0.01 wt%” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3: “–” indicates that the restricted substance corresponds to the exemption.

Singapore warning statement
This product / power adaptor comes with detachable plug / detachable power supply cord set, for Singapore, please use the provided 3-pin plug that complies to SS145 or 2-pin plug that complies to EN50075.

EU Declaration of Conformity

(Europe)

English:| In compliance with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU as this product meets the requirements of the following standards:

· EN 55032 Emission

· EN55024/55035 Immunity

· EN 62368-1 Safety

---|---
English:| Hereby, Linksys USA, Inc. declares that the radio equipment is in compliance with Directive 2014/53/EU.
---|---
English:| The full text of the EU Declaration of Conformity is available at the following internet address: http://www.linksys.com/DoC/
---|---

UK Declaration of Conformity

Manufacturer, Linksys USA, Inc., declare under our sole responsibility that this product is in compliance with Electromagnetic Compatibility Regulations 2016(S.I. 2016 No. 1091), Electrical Equipment (Safety) Regulations 2016 (S.I. 2016 No. 1101), The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (S.I. 2012 No. 3032), The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019. The full text of the UK Declaration of Conformity is available at the following internet address: http://www.linksys.com/DoC/ User Information for Consumer Products Covered by EU Directive 2012/19/EC on Waste Electric and Electronic Equipment (WEEE)
This document contains important information for users with regards to the proper disposal and recycling of Linksys home networking products. Consumers are required to comply with this notice for all electronic products bearing the following symbol: Environmental Information for Customers in the European Union
European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.

EU Authorized Representative
Linksys UK Limited, Amsterdam Branch Herikerbergweg 106
1101 CM Amsterdam
The Netherlands

UK Authorized Representative
Linksys UK Ltd.
Unit 1, Regent Park,
Booth Drive,
Park Farm South,
Wellingborough,
Northants NN8 6GR,
United Kingdom
Linksys.com/support
© 2022 Linksys Holdings, Inc. and/or its affiliates. All rights reserved. Third-party trademarks mentioned are the property of their respective owners.